| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
Re: [Xen-users] multiple vlan in dom0 and domu
On Fri, Dec 11, 2009 at 2:44 AM, Simon Hobson <linux@xxxxxxxxxxxxxxxx> wrote:
> Vladimir Elizarov wrote:
>
>> I use a script network-multi vlan and network-bridge-vlan for multiple
>> VLANs in domu.
That can be ... a pain :P
It'd be easier if you just use your OS networking script to create
bridges an vlan
> I see two ways of doing this, I'm sure someone will be along soon enough to
> say which is easiest to set up and use - and if both options are actually
> possible.
>
> 1) Attach the physical interface to a single bridge, and then every vif will
> automatically get access to all VLANs. Each DomU will have to be configured
> for VLAN operation. I'm assuming here that the bridge will just
> transparently forward tagged packets
Yup. At least this works on RHEL. Last time I check it doesn't work on
newest Opensolaris dom0 though.
> - would you need to adjust MTU ?
Usually, no. Not if you have a common NIC and stable drivers. It used
to be a problem for newer NICs with buggy drivers.
>
> 2) Attach each VLAN to a separate bridge - so each bridge is carrying
> untagged packets for a specific LAN. Then you would configure DomUs with as
> many interfaces as there are LANs they need to connect to - the DomU is NOT
> configured for VLANs as it now has a separate interface on each LAN.
I post a sample configuration for RHEL/Centos on this list that does just that.
--
Fajar
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home