RE: [Xen-users] problem with xm create

["Ian Tobin" <itobin@xxxxxxxxxxxxx>]

Hello,

Did you set your dom u config to use a RAM disk or are the sata drivers 
complied into the kernel?



-----Original Message-----
From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx 
[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of elli_dberg@xxxxxx
Sent: 30 June 2009 13:02
To: Andreas Sommer
Cc: Xen-users@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-users] problem with xm create

Hi Andreas, and everyone,

I did as you said and I set extra= "xencons=tty". Now the boot precess goes 
some more lines further but now there is another problem. These are the last 
lines of the output of xm create -c ...

...
fuse init (API version 7.7)
Done.
Begin: Running /scripts/init-premount ...
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
Done.
Begin: Waiting for root file system... ...
Done.
chvt: can't open console
chvt: VT_ACTIVATE: Bad file descriptor
Gave up waiting for root device.  Common problems:
 - Boot args (cat /proc/cmdline)
   - Check rootdelay= (did the system wait long enough?)
   - Check root= (did the system wait for the right device?)
 - Missing modules (cat /proc/modules; ls /dev)
chvt: can't open console
chvt: VT_ACTIVATE: Bad file descriptor
ALERT! /dev/sda1 does not exist. Dropping to a shell!


BusyBox v1.10.2 (Ubuntu 1:1.10.2-1ubuntu7) built-in shell (ash)
Enter 'help' for a list of built-in commands.

(initramfs) 

Does that mean that the virtual machine cannot recognize the file system? I 
have a SATA hard drive and I am using the same kernel and setup as for dom0. I 
tried also specifying the root device as its UUID but didn't work neither.
Do have any idea?

Thank you 

Andreas Sommer <AndiDog@xxxxxx> schrieb am 30.06.2009 12:53:02:
Check if "xm list" shows you a running state ("r" for running or "b" for 
booting, "p" often means that an error occurred). I guess you might have 
forgotten the line

extra = ''xencons=tty"

so the domU seems to hang because it doesn't show the login prompt on 
the correct console.

Compare to this thread: 
http://lists.xensource.com/archives/html/xen-users/2009-06/msg00409.html


elli_dberg@xxxxxx wrote:
> Hi,
>
> I am having troubles starting a domU. I run it with: xm create -c 
> config_file. Then I can see the output and it seems as if everything is going 
> well. Then, the output suddenly stops without any failures and there is 
> nothing I can do. The cursor is blinking but not responding to any keyboard 
> inputs. I even cannot kill the process with ctrl+c. When I run 
> xen-list-images it shows the image: 
> $ xen-list-images
> Name: virtualrouter1
> Memory: 128
> IP: 10.23.100.13
>
> Here is the output of xm create:
>
> Using config file "./virtualrouter1.cfg".
> Started domain virtualrouter1 (id=2)
> Bootdata ok (command line is root=/dev/sda1 ro )
> Linux version 2.6.18.8-xen (root@virtualrouter1) (gcc version 4.3.2 (Ubuntu 
> 4.3.2-1ubuntu12) ) #2 SMP Wed Jun 24 14:11:03 CEST 2009
> BIOS-provided physical RAM map:
>  Xen: 0000000000000000 - 0000000010800000 (usable)
> No mptable found.
> Built 1 zonelists.  Total pages: 66660
> Kernel command line: root=/dev/sda1 ro 
> Initializing CPU#0
> PID hash table entries: 2048 (order: 11, 16384 bytes)
> Xen reported: 3000.680 MHz processor.
> Console: colour dummy device 80x25
> Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
> Software IO TLB disabled
> Memory: 231424k/270336k available (2585k kernel code, 30416k reserved, 1122k 
> data, 192k init)
> Calibrating delay using timer specific routine.. 6002.56 BogoMIPS 
> (lpj=30012826)
> Security Framework v1.0.0 initialized
> Capability LSM initialized
> Mount-cache hash table entries: 256
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 6144K
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 0
> SMP alternatives: switching to UP code
> Freeing SMP alternatives: 28k freed
> Brought up 1 CPUs
> migration_cost=0
> checking if image is initramfs... it is
> Freeing initrd memory: 20068k freed
> NET: Registered protocol family 16
> Brought up 1 CPUs
> PCI: setting up Xen PCI frontend stub
> ACPI: Interpreter disabled.
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI: disabled
> suspend: event channel 6
> xen_mem: Initialising balloon driver.
> SCSI subsystem initialized
> PCI: System does not support PCI
> PCI: System does not support PCI
> NET: Registered protocol family 2
> IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
> TCP established hash table entries: 16384 (order: 6, 262144 bytes)
> TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
> TCP: Hash tables configured (established 16384 bind 8192)
> TCP reno registered
> IA-32 Microcode Update Driver: v1.14a-xen <tigran@xxxxxxxxxxx>
> audit: initializing netlink socket (disabled)
> audit(1246352198.193:1): initialized
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> Initializing Cryptographic API
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> rtc: IRQ 8 is not free.
> Non-volatile memory driver v1.2
> RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
> loop: loaded (max 8 devices)
> e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k4
> e1000e: Copyright (c) 1999-2008 Intel Corporation.
> Intel(R) Gigabit Ethernet Network Driver - version 1.2.45-k2
> Copyright (c) 2008 Intel Corporation.
> ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 1.3.56.5-NAPI
> Copyright (c) 1999-2008 Intel Corporation.
> Xen virtual console successfully installed as xvc0
> Event-channel device installed.
> blktap_device_init: blktap device major 254
> blktap_ring_init: blktap ring major: 253
> netfront: Initialising virtual ethernet driver.
> vif vif-0: 2 parsing device/vif/0/mac
> vif vif-1: 2 parsing device/vif/1/mac
> vif vif-2: 2 parsing device/vif/2/mac
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
> st: Version 20050830, fixed bufsize 32768, s/g segs 256
> osst :I: Tape driver with OnStream support version 0.99.4
> osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
> aoe: aoe_init: AoE v22 initialised.
> PNP: No PS/2 controller found. Probing ports directly.
> i8042.c: No controller found.
> mice: PS/2 mouse device common for all mice
> md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
> md: bitmap version 4.39
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> PCI IO multiplexer device installed.
> XENBUS: Device with no driver: device/console/0
> BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> EDD information not available.
> Freeing unused kernel memory: 192k freed
> fuse init (API version 7.7)
>
>
> What could be the problem? Appreciate any help.
>
> Thank you,
> Elisabeth 
______________________________________________________
GRATIS für alle WEB.DE-Nutzer: Die maxdome Movie-FLAT!
Jetzt freischalten unter http://movieflat.web.de


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users