|
|
|
|
|
|
|
|
|
|
xen-users
RE: [Xen-users] Can't get guest domain network working!
This is kernel no, I need xen ver , os make & h/w details..
- regards
Pallab
-----Original Message-----
From: Donglai Zhang [mailto:dlzhangster@xxxxxxxxx]
Sent: Wednesday, June 17, 2009 11:30 AM
To: Pallab Chakrabarty; xen-users@xxxxxxxxxxxxxxxxxxx
Subject: Re: [Xen-users] Can't get guest domain network working!
Xen version is 2.6.18.8-xen.
regards,
Donglai
On Wed, Jun 17, 2009 at 3:26 PM, Pallab Chakrabarty
<pchakrabarty@xxxxxxxxxxxxxxx> wrote:
What's of your Xen and OS make/ver?
- regards
Pallab
-----Original Message-----
From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Donglai Zhang
Sent: Wednesday, June 17, 2009 11:16 AM
To: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: [Xen-users] Can't get guest domain network working!
Hi, there:
I have installed xen(2.6.18.8-xen) and had
successfully started domU guests (one or two) from dom0. However, I am
not able to start the network for domU machines.
Following is the information from my linux box.
After the it is started:
$ ifconfig
eth1 Link encap:Ethernet HWaddr 00:A0:C9:D6:65:DB
inet addr:XXX.XXX.10.133 Bcast:XXX.XXX.10.255
Mask:255.255.255.0
inet6 addr: fe80::2a0:c9ff:fed6:65db/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:196716 errors:0 dropped:0 overruns:0
frame:1
TX packets:82301 errors:0 dropped:0 overruns:0
carrier:0
collisions:0 txqueuelen:1000
RX bytes:91072761 (86.8 MiB) TX bytes:15558692
(14.8 MiB)
Interrupt:18
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:6440 errors:0 dropped:0 overruns:0
frame:0
TX packets:6440 errors:0 dropped:0 overruns:0
carrier:0
collisions:0 txqueuelen:0
RX bytes:55534272 (52.9 MiB) TX bytes:55534272
(52.9 MiB)
////////////Start xend
#xend start
Nothing to flush.
Waiting for peth1 to negotiate link.
# ifconfig
eth1 Link encap:Ethernet HWaddr 00:A0:C9:D6:65:DB
inet addr:XXX.XXX.10.133 Bcast:XXX.XXX.10.255
Mask:255.255.255.0
inet6 addr: fe80::2a0:c9ff:fed6:65db/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:25 errors:0 dropped:0 overruns:0
frame:0
TX packets:40 errors:0 dropped:0 overruns:0
carrier:0
collisions:0 txqueuelen:0
RX bytes:3277 (3.2 KiB) TX bytes:10992 (10.7 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:6440 errors:0 dropped:0 overruns:0
frame:0
TX packets:6440 errors:0 dropped:0 overruns:0
carrier:0
collisions:0 txqueuelen:0
RX bytes:55534272 (52.9 MiB) TX bytes:55534272
(52.9 MiB)
peth1 Link encap:Ethernet HWaddr 00:A0:C9:D6:65:DB
inet6 addr: fe80::2a0:c9ff:fed6:65db/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:196767 errors:0 dropped:0 overruns:0
frame:1
TX packets:82358 errors:0 dropped:0 overruns:0
carrier:0
collisions:0 txqueuelen:1000
RX bytes:91080163 (86.8 MiB) TX bytes:15574125
(14.8 MiB)
Interrupt:18
/////////////The peth1 and eth1 are all available and check the bridge...
# brctl show
bridge name bridge id STP enabled interfaces
eth1 8000.00a0c9d665db no peth1
///////////The name of the bridge is "eth1" and interface "peth1" has been
added to the bridge.
///////////Configure the configuration file for the guest domain
************The content of XmGuest.conf*********
kernel = "/boot/vmlinuz-2.6.18.8-xen-U"
memory = 256
name = "ExampleDomain03"
vif = [ 'mac=00:16:3e:31:48:5f', 'bridge=eth1' ] ###The bridge is given
name eth1
disk = [ 'phy:sda7,sda7,w' ]
dhcp="off"
ip='XXX.XXX.10.134'
netmask="255.255.255.0"
gateway="XXX.XXX.10.99" #The gateway is the same as the one used by dom0
network.
hostname="helloworld"
root = "/dev/sda7 ro"
extra = "4"
extra = "xencons=tty"
***************XmGuest.conf finish here**********************
//////Copy /lib/modules/2.6.18.8-xen/ directory to the guest domain disk.
There are some exceptions
//////from guest domain if I don't do this.
cp -r /lib/modules/2.6.18.8-xen/ /mnt/ubuntu_sda7/lib/modues/
//////Now start the guest domain
# xm create XmGuest.conf
Using config file "./XmGuest.conf".
Started domain ExampleDomain03 (id=11)
///////show xm domains
# xm list
Name ID Mem VCPUs State
Time(s)
Domain-0 0 510 2 r-----
4443.7
ExampleDomain03 11 256 1 -b----
9.3
/////////check bridge from dom0
# brctl show
bridge name bridge id STP enabled interfaces
eth1 8000.00a0c9d665db no vif11.1
vif11.0
peth1
///////////The bridge has bounded the guest interface.
////////////On domU guest
dlzhang@dlzhang-desktop:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:16:3e:31:48:5f
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:365 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:28617 (28.6 KB) TX bytes:1368 (1.3 KB)
eth1 Link encap:Ethernet HWaddr 00:16:3e:08:da:f6
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:363 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:28085 (28.0 KB) TX bytes:1368 (1.3 KB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
///////////The network has not been configured successfully.
///////////The eth0 Hardware address is set, but not the ip address
dlzhang@dlzhang-desktop:/etc$ ping XXX.XXX.10.133
connect: Network is unreachable
I have tried with different linux box and different domU, all got the
similar problem.
Would you please give some hints about what might go wrong?
Thanks a lot !
Donglai Zhang
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.12.75/2182 - Release Date: 06/16/09
21:23:00
--
Donglai Zhang
Ph.D Candidate
School of Computer Science
University of Adelaide,
SA, Australia 5083
Tel: 0061 8 83036166
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.12.75/2182 - Release Date: 06/16/09
21:23:00
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
|
|