I am running 2.6.24-22-xen kernel. It has been a while since I installed this
and I have tried so many things that I can't remember how I installed it but
I do have backports in my sources.list:
deb http://ftp.osuosl.org/pub/ubuntu/ hardy-backports main restricted universe
multiverse
Anyhow, I did try booting 2.6.24-22 and 3.2 xen but I got:
# xm create cos52.cfg -c
Using config file "/etc/xen/cos52.cfg".
Error: (38, 'Function not implemented')
Thank you,
David
On Friday 26 December 2008 00:36, Boris Derzhavets wrote:
> I've got it working on Hardy (native 3.2) Dom0 :-
>
> http://lxer.com/module/newswire/view/110642/index.html
>
> Intrepid Xen 3.3 Hypervisor may be back ported to Hardy Dom0 :-
>
> http://lxer.com/module/newswire/view/112045/index.html
>
> and i believe http://lxer.com/module/newswire/view/110642/index.html
> may be reproduced at Xen 3.3 Hardy Dom0 (2.6.24-22-xen)
>
> In case of Xen 3.3 complete port to Ubuntu Hardy , in general, it should
> (?) work as well, but instead of native vmlinuz-2.6.24-22-xen your system
> is driven by vmlinuz-2.6.18.8-xen. View changes in profile.
>
> --- On Fri, 12/26/08, David Koski <david@xxxxxxxxxxxxxxxx> wrote:
> From: David Koski <david@xxxxxxxxxxxxxxxx>
> Subject: [Xen-users] Installing domU from ISO image file
> To: xen-users@xxxxxxxxxxxxxxxxxxx
> Date: Friday, December 26, 2008, 12:38 AM
>
> I am trying to install CentOS from an ISO image file but the installer does
> not see a CD-ROM drive. The VNC viewer works but the CentOS installer
> indicates "Unable to find any devices of the type needed for this
> installation type." Then it prompts with "[Select driver] [Use a
> driver
> disk] [Back]". I have tried several variations of the "disk"
> paramater, all
> with the same results. I also used losetup to attach the imate to
> /dev/loop0 and tried the commented out "disk" parameters with the same
> results.
>
> xen is 3.3
> OS is Ubuntu 8.04
>
> 1 name = "cos52"
> 2 memory = 128
> 3
> 4
> I've commented out this entries (B.D.)
> ************************************************************
> # disk = [ 'file:/etc/xen/iso/COS52.iso,ioemu:hdc:cdrom,r',
> 'phy:/dev/vg00/elastix,xvda1,w' ]
> #disk = [ 'phy:loop0,hdc,r','phy:/dev/vg00/elastix,xvda1,w' ]
> *************************************************************
> disk = [ 'phy:/dev/loop0,hdc:cdrom,r','phy:/dev/vg00/elastix,xvda1,w' ]
>
>
> 6
> 7
> 8 vif = [ '' ]
> 9 vfb =
> ["type=vnc,vncunused=1,vnclisten=0.0.0.0,vncpasswd=kalamoja"]
> 10
> 11 bootloader = "/usr/bin/pygrub"
> 12 kernel = '/images/xen/vmlinuz'
> 13 ramdisk = '/images/xen/initrd.img'
> 14
> 15 vcpus = 1
> 16 on_reboot = 'restart'
> 17 on_crash = 'restart'
> 18
>
> Any suggestions?
>
> Regards,
> David Koski
> dkoski@xxxxxxxxxxx
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home