Am Freitag, den 28.11.2008, 00:53 +0200 schrieb Rudi Ahlers:
> On Thu, Nov 27, 2008 at 5:48 PM, Thomas Halinka <lists@xxxxxxxxx> wrote:
> > Hi Rudi,
> > Am Donnerstag, den 27.11.2008, 14:24 +0200 schrieb Rudi Ahlers:
> >> Hi all,
> >> How is it possible to get a eth0 & eth1 for a XEN domU?
> > jap,
> >> The reason I
> >> ask, is that we need to monitor the bandwidth every XEN VPS uses, but
> >> I don't want to count local bandwidth between VPS's, and between the
> >> VPS & backup server.
> > ok
> >> So, if all internet traffic gets routed on eth0, and IP rather
> >> 196.34.x.x & internal traffic on eth1 & 192.168.10.x - how would I do
> >> that?
> > fire up 2 bridges:
> > - xen-internal (192.168.10.0)
> > - xen-external (public IPs)
> Can you please explain this to me in lay-man's terms? How do I do this
> on the dom0?
Supposing you have 2 Nics: eth0 and eth1
eth0 = internet/router/outer-world
eth1 = lan /private-net
# /etc/network/interfaces - network interfaces configuration
# loopback interface
iface lo inet loopback
# ethernet interface
iface external inet static
iface internal inet static
eth1 is not really needed, you also can use dummy-devices too.
> > With this you can do separated traffic-accounting for internal and
> > external traffic.
> >> Currently when I look @ a domU, I have eth0, eth0:1 & eth0:2
> >> (192.168.10.63) setup, but they all pass through the same interface
> >> vifwise0 on the dom0 side,
> >> vifwise0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
> >> inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
> >> UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
> >> RX packets:1961043 errors:0 dropped:0 overruns:0 frame:0
> >> TX packets:2521537 errors:0 dropped:4218 overruns:0 carrier:0
> >> collisions:0 txqueuelen:32
> >> RX bytes:4195421597 (3.9 GiB) TX bytes:1075982597 (1.0 GiB)
> >> So, from the 3.9BG traffice transmitted, we don't know what is local &
> >> what is internet traffic. I'd like to completely segment the traffic,
> > because theres no separation and every traffic is transmitted over this
> > bridge.
> >> how can I do that?
> > Im using traffic-accounting with iptables....
> How exactly do you do this?
counting the packets which are transferred over the external-bridge ;)
since my external bridge is the gateway for the hosts this was not a
> > hth,
> > Thomas
Xen-users mailing list