Hi!
I built a xen 3.3.0 kernel on a Debian GNU/Linux 4.0 r4a (AMD64). When I
boot the system without xen everything works fine. When I boot it with
xen the network is not working. Here are the outputs of `ifconfig -a`
for the system with and without xen:
Without xen (everything is as it should be):
-----------------------------------------------------
# ifconfig -a
eth0 Protokoll:Ethernet Hardware Adresse <anonymized>
inet Adresse:192.168.2.105 Bcast:192.168.2.255
Maske:255.255.255.0
inet6 Adresse: fe80::21e:8cff:fece:7f/64
Gültigkeitsbereich:Verbindung
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:283 errors:0 dropped:0 overruns:0 frame:0
TX packets:45 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:1000
RX bytes:31321 (30.5 KiB) TX bytes:5393 (5.2 KiB)
Interrupt:177
eth1 Protokoll:UNSPEC Hardware Adresse <anonymized>
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
lo Protokoll:Lokale Schleife
inet Adresse:127.0.0.1 Maske:255.0.0.0
inet6 Adresse: ::1/128 Gültigkeitsbereich:Maschine
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:66 errors:0 dropped:0 overruns:0 frame:0
TX packets:66 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:0
RX bytes:5176 (5.0 KiB) TX bytes:5176 (5.0 KiB)
sit0 Protokoll:IPv6-nach-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
-----------------------------------------------------
Only eth0 is used, because eth1 is an onbord WLAN card that is disabled
in the bios (when I use ifconfig without the -a option, this interface
is not listed).
With xen (no network interfaces except lo and the tmpbridge which is not
connected to any network interface):
-----------------------------------------------------
# ifconfig -a
lo Protokoll:Lokale Schleife
inet Adresse:127.0.0.1 Maske:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:60 errors:0 dropped:0 overruns:0 frame:0
TX packets:60 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:0
RX bytes:4660 (4.5 KiB) TX bytes:4660 (4.5 KiB)
tmpbridge Protokoll:Ethernet Hardware Adresse 00:00:00:00:00:00
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
-----------------------------------------------------
I was not able to detect the problem from the logfiles. Which further
information do you need to detect the problem or what should I try out?
Thanks, Ingo!
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
| 
Home