[Xen-users] Xen 3.3 domU Networking

["Ricardo Tiago" <rtiago@xxxxxxxxx>]

Hi All,

I compiled xen3.3 on a rhel 5 machine and the dom0 booted ok without
problems but when i start a rhel5 dom0 i don't get networking.
During the domU boot process the message 'Networking not configured -
exiting' appears. Did i miss something in the configuration file or
loading a module?

== config file ==

name = "vm1-gen-1"
ip = "xx.xx.xx.xx"
hostname = "gen-1"
memory = "256"
disk = 
['phy:/dev/vg1/xen-root-gen1,xvda1,w','phy:/dev/vg1/xen-swap-gen1,xvda2,w']
root = "/dev/xvda1 ro"
vif = ['mac=00:16:3e:aa:aa:aa,ip=xx.xx.xx.xx']
cpus = '0'
vcpus = '1'
gateway = "xx.xx.xx.xx"
netmask = "255.255.0.0"
on_reboot = 'restart'
on_crash = 'restart'
on_poweroff = 'restart'
bootloader = '/usr/bin/pygrub'

== dom0 brctl show  ==
bridge name     bridge id               STP enabled     interfaces
eth0            8000.001e4f3dbe83       no              vif3.0
                                                        peth0

=== boot - domU ===
Xen virtual console successfully installed as xvc0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
XENBUS: Device with no driver: device/vbd/51713
XENBUS: Device with no driver: device/vbd/51714
XENBUS: Device with no driver: device/vif/0
XENBUS: Device with no driver: device/console/0
Freeing unused kernel memory: 168k freed
Write protecting the kernel read-only data: 360k
Red Hat nash version 5.1.19.6 starting
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
Setting up hotplug.
Creating block device nodes.
Loading uhci-hcd.ko module
USB Universal Host Controller Interface driver v3.0
Loading ohci-hcd.ko module
Loading ehci-hcd.ko module
Loading jbd.ko module
Loading ext3.ko module
Loading dm-mod.ko module
device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: dm-devel@xxxxxxxxxx
Loading dm-mirror.ko module
Loading dm-zero.ko module
Loading dm-snapshot.ko module
Loading xenblk.ko module
Registering block device major 202
Loading xennet.ko module
netfront: Initialising virtual ethernet driver.
netfront: device eth0 has copying receive path.
Creating root device.
Mounting root filesystem.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Setting up other filesystems.
Setting up new root fs
no fstab.sys, mounting internal defaults
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /sys
SELinux:  Disabled at runtime.
audit(1223903723.862:2): selinux=0 auid=4294967295
.......
Setting hostname localhost:  [  OK  ]
No devices found
Setting up Logical Volume Management:   No volume groups found
[  OK  ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/xvda1
/dev/xvda1: clean, 51585/655360 files, 381138/1310720 blocks
[  OK  ]
Remounting root filesystem in read-write mode:  [  OK  ]
Mounting local filesystems:  mount: none already mounted or /sys busy
mount: according to mtab, sysfs is already mounted on /sys
[FAILED]
Enabling local filesystem quotas:  [  OK  ]
Enabling /etc/fstab swaps:  [  OK  ]
INIT: Entering runlevel: 3
Entering non-interactive startup
Applying Intel CPU microcode update: [FAILED]
There is not any 3945 hardware, not starting ipw3945dStarting
KnConfig: [NO DATA]
Starting auditd: [  OK  ]
Starting system logger: [  OK  ]
Starting kernel logger: [  OK  ]
Starting irqbalance: [  OK  ]
Networking not configured - exiting
Starting NFS statd: [  OK  ]
Starting RPC idmapd: [  OK  ]
Starting system message bus: [  OK  ]
[  OK  ] Bluetooth services:[  OK  ]
Starting PC/SC smart card daemon (pcscd): [  OK  ]
Starting hidd: [  OK  ]
Starting autofs:  Loading autofs4: [  OK  ]
Starting automount: [  OK  ]

Regards,
Ricardo

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users