Re: [Xen-users] xen without xenbr0

[Alexander Hoßdorf <xen-users@xxxxxxxxxxx>]

Have you compiled it from source?
Silly question ;-)
You have to, if you build xen from source.

Cheers,
Alex


Jia Rao schrieb:
> The new driver I have installed is 1.7.1c which is the newest.
> The other info:
> Xen: 3.1
> Kernel: 2.6.18
> OS: RHEL 4.5 x86_64
>
> Jia.
>
> On Thu, Jul 31, 2008 at 4:26 PM, Alexander Hoßdorf 
> <xen-users@xxxxxxxxxxx> wrote:
>     If you're running a Dell PowerEdge you have a Broadcom ethernet
>     Adapter, right?
>     Are you using the bnx2 module?
>
>     I had the same issues using debian.
>     There is a bug in this driver, that freezes the driver when used
>     with xen.
>     The newest version which you can download from broadcom fixes this.
>
>     What version of bnx2 do you have?
>
>     Might this perhaps be your problem?
>
>     Cheers,
>     Alex
>
>
>
>     Jia Rao schrieb:
>
>         Unfortunately, the eth0 starts to fail sometimes when xend is
>         started (better than the previous NIC driver, with previous
>         one, eth0 fails even without starting xend, and I can not see
>         xenbr0). Right now, there are xenbr0 and xenbr1 in ifconfig -a.
>
>         I am trying to disable the management firmware in the NIC now...
>
>         Jia.
>
>         On Thu, Jul 31, 2008 at 12:28 PM, Jia Rao <rickenrao@xxxxxxxxx
>         <mailto:rickenrao@xxxxxxxxx> <mailto:rickenrao@xxxxxxxxx
>         <mailto:rickenrao@xxxxxxxxx>>> wrote:
>
>            I am running Xen 3.1 compiled from source and REHL 4.5 shipped
>            with Dell PowerEdge 1950 III.
>
>
>
>
>            On Thu, Jul 31, 2008 at 12:01 PM, Todd Deshane
>         <deshantm@xxxxxxxxx <mailto:deshantm@xxxxxxxxx>
>            <mailto:deshantm@xxxxxxxxx <mailto:deshantm@xxxxxxxxx>>> wrote:
>
>                On Thu, Jul 31, 2008 at 10:04 AM, Jia Rao
>         <rickenrao@xxxxxxxxx <mailto:rickenrao@xxxxxxxxx>
>                <mailto:rickenrao@xxxxxxxxx
>         <mailto:rickenrao@xxxxxxxxx>>> wrote:
>                > We got the PowerEdge III Boxes a month ago.
>                >
>              
>          http://mywiki.ncsa.uiuc.edu/wiki/Dell_PE1950_NIC_Firmware_Workaround
>                is the
>                > solution I found. However I did not have any CD with
>         me, so
>                I tried to
>                > upgrade the NIC driver first as indicated by the
>         following
>                link in Citrix
>                > forum
>                >
>              
>          http://forums.citrix.com/thread.jspa?threadID=151786&tstart=0
>         <http://forums.citrix.com/thread.jspa?threadID=151786&tstart=0>
>              
>          <http://forums.citrix.com/thread.jspa?threadID=151786&tstart=0
>         <http://forums.citrix.com/thread.jspa?threadID=151786&tstart=0>>
>                >
>                > I worked for me, but some guys in Citrix forum said
>         it still
>                has some
>                > problems after one week running.
>                >
>
>                What version of Xen and distro are you running?
>
>
>                --
>                Todd Deshane
>                http://todddeshane.net
>                check out our book: http://runningxen.com
>
>
>
>         ------------------------------------------------------------------------
>
>
>
>         _______________________________________________
>         Xen-users mailing list
>         Xen-users@xxxxxxxxxxxxxxxxxxx
>         <mailto:Xen-users@xxxxxxxxxxxxxxxxxxx>
>         http://lists.xensource.com/xen-users
>
>
>         __________ Hinweis von ESET NOD32 Antivirus,
>         Signaturdatenbank-Version 3315 (20080731) __________
>
>         E-Mail wurde geprüft mit ESET NOD32 Antivirus.
>
>         http://www.eset.com
>          
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users