Thanks, I ran the command, now I can ping the Dom0 but I still cant ping
anything beyond that from the DomU, can't ping anything else beyond the
machine itself, get destination host unreachable... still..
Steve Hayward-2 wrote:
>
> I had a similar issue with one of my Centos 5.1 servers, which was fixed
> by running the command:
>
> ethtool -K eth0 tx off
>
> I added this to my rc.local file of each DomU.
>
> Hope it works for you.
>
> Steve
>
>
>
> ________________________________________
> From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
> [xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of s@l
> [sal.bayat@xxxxxxxxxxxxxxxx]
> Sent: Friday, July 18, 2008 3:50 PM
> To: xen-users@xxxxxxxxxxxxxxxxxxx
> Subject: [Xen-users] Xen Installation without virtualization enabled in
> Bios
>
> Hi there,
>
> Having a problem with Xen using RHEL 5. Using a dell poweredge 1950 with
> BCM5708 integrated NIC's.
>
> 07:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708
> Gigabit Ethernet (rev 12)
> Subsystem: Dell Unknown device 01b3
> Control: I/O- Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop-
> ParErr+
> Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (16000ns min), Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at f4000000 (64-bit, non-prefetchable) [size=32M]
> Capabilities: [40] PCI-X non-bridge device
> Command: DPERE- ERO- RBC=512 OST=8
> Status: Dev=07:00.0 64bit+ 133MHz+ SCD- USC- DC=simple
> DMMRBC=512 DMOST=8 DMCRS=32 RSCEM- 266MHz- 533MHz-
> Capabilities: [48] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=1 PME-
> Capabilities: [50] Vital Product Data
> Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/0
> Enable-
> Address: 214082b132d03000 Data: 0b40
>
>
>
> Basically, I have this strange issue where everything is good, I can
> create
> my virtual guests, but there is some issue with network connectivity. I
> can
> get to the outside world no problem from the virtual host, but on the
> guests, I can only ping the local machine, I cant ping or access anything
> on
> the outside world.
>
> At first I was taking a look at drivers and other network related
> problems,
> when I noticed that the virtualization option in the bios cpu settings was
> NOT enabled. I enabled it, but im still having the same problem.
>
> My question is: Would installing RHEL 5 and Xen while this option was NOT
> enabled in the bios cause problems and perhaps cause this networking
> connectivity issue im experiencing? Do I need to reinstall xen?
>
> Info:
>
> version: xen-3.0.3-64.el5_2.1
> --
> View this message in context:
> http://www.nabble.com/Xen-Installation-without-virtualization-enabled-in-Bios-tp18532312p18532312.html
> Sent from the Xen - User mailing list archive at Nabble.com.
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>
>
--
View this message in context:
http://www.nabble.com/Xen-Installation-without-virtualization-enabled-in-Bios-tp18532312p18736491.html
Sent from the Xen - User mailing list archive at Nabble.com.
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home