I am using xen 3.1 and here is the cfg file for
one of my xen domains.
kernel = "/boot/vmlinuz-2.6.18-xen"
ramdisk = "/boot/initrd-2.6.18-xen.img"
memory = 2000
name = "fnpc4x4"
vcpus = 1
vif = [ 'mac=00:16:3e:0F:04:04, bridge=xenbr0', 'mac=00:16:3E:0F:04:0c,
bridge=xenbr1' ]
disk = [ 'phy:LG0/LV4,sda1,w', 'phy:LG0/LV9,sda2,w','phy:LG0/LV14,sda3,w' ]
ip= "131.225.167.25"
netmask= "255.255.254.0"
gateway= "131.225.167.200"
hostname= "fnpc4x4.fnal.gov"
root = "/dev/sda1 ro"
extra = "4"
From the hypervisor logs I get the following:
IP-Config: Complete:
device=eth0, addr=131.225.167.25, mask=255.255.254.0,
gw=131.225.167.200,
host=fnpc4x4, domain=, nis-domain=fnal.gov,
bootserver=1.2.3.4, rootserver=1.2.3.4, rootpath=
-----------
I don't want the nis-domain set to fnal.gov. (This winds
up having a non-null value of "domainname" set when
ypbind starts up, which the /etc/yp.conf file can't override).
Is there any way I can change the xen.cfg file so
that the nis-domain is set correctly at startup, or not
set at all so it can be set by the config files inside the domu?
Thanks
Steve Timm
--
------------------------------------------------------------------
Steven C. Timm, Ph.D (630) 840-8525
timm@xxxxxxxx http://home.fnal.gov/~timm/
Fermilab Computing Division, Scientific Computing Facilities,
Grid Facilities Department, FermiGrid Services Group, Assistant Group Leader.
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home