> I modified all of the inf files after installation. I performed the
three
> things you listed, but it still would not install. When I removed the
.NT
> from the duplicate xxx.NTx86 sections altogether (no extension), it
> accepted the driver. I ended up with a Xen PCI Device Driver, a Xen
Net
> Device Driver listed with my regular net adapter, and 3 Xen Block
Device
> Drivers listed alone in SCSI/RAID (2 HD, 1 cdrom presumably).
D'oh, yes, I was remembering incorrectly. Before I can make the changes
to the .inf files in the source, I need to be sure that the change
doesn't break 2003 x32 or 2003 x64. Are you able to test?
> However,
> when I boot into GPLPV mode, I get a BSOD as follows:
>
> STOP: 0x000000D1 (0x00000114, 0x00000016, 0x00000000, 0xBFFA1558)
> DRIVER_IRQL_NOT_LESS_OR_EQUAL
>
> *** Address BFFA1558 base at BFF9D000, DateStamp 42d65966 -
SCSIPORT.SYS
>
> Any ideas on the BSOD?
>
Unfortunately that's just a fairly generic crash. Because the crash is
occurring in scsiport.sys it almost certainly means that you won't be
getting a crash dump. Unless you can build from source and get intimate
with the debugger, you'll have to wait until I can have a look. No
guarantees about when sorry.
If I get time before then I'll have a look through the scsiport stuff
and see if it makes any references to differences between 2000 and 2003.
Thanks for following up.
James
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home