I am running Centos 5.1 and have built Xen 3.2.1 from
mercurial. It starts fine but uses a random Mac on every restart resulting in a
new IP on every reboot as well. Is there a solution? I would prefer the h/w mac
for the interface. Other info: AMD x2-4200, 4GB RAM, SATA, single Ethernet
(nForce/forcedeth)
My guess is that modules are loading in the wrong order, but
I have no idea what the proper order would be or how to specify that.
Greg
[root@localhost lib]# dmesg
Linux version 2.6.18.8-xen (root@xxxxxxxxxxxxxxxx) (gcc
version 4.1.2 20070626 (Red Hat 4.1.2-14)) #4 SMP Sun May 25 16:08:07 MDT 2008
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 000000001fc00000 (usable)
0MB HIGHMEM available.
508MB LOWMEM available.
NX (Execute Disable) protection: active
On node 0 totalpages: 130048
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 125952 pages, LIFO batch:31
found SMP MP-table at 000ff780
DMI present.
ACPI: RSDP (v000 ACPIAM
)
@ 0x000f93e0
ACPI: RSDT (v001 A M I OEMRSDT 0x08000731 MSFT
0x00000097) @ 0xbbfd0000
ACPI: FADT (v002 A M I OEMFACP 0x08000731 MSFT
0x00000097) @ 0xbbfd0200
ACPI: MADT (v001 A M I OEMAPIC 0x08000731 MSFT
0x00000097) @ 0xbbfd0390
ACPI: MCFG (v001 A M I OEMMCFG 0x08000731 MSFT
0x00000097) @ 0xbbfd0400
ACPI: OEMB (v001 A M I AMI_OEM 0x08000731 MSFT
0x00000097) @ 0xbbfde040
ACPI: HPET (v001 A M I OEMHPET0 0x08000731 MSFT
0x00000097) @ 0xbbfd47e0
ACPI: SSDT (v001 A M I POWERNOW 0x00000001 AMD
0x00000001) @ 0xbbfd4820
ACPI: DSDT (v001 1ADMB 1ADMB006 0x00000006 INTL
0x20051117) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI
0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c0000000 (gap:
bc000000:42c00000)
Detected 2210.175 MHz processor.
Built 1 zonelists. Total pages: 130048
Kernel command line: ro root=/dev/VolGroup01/LogVol00
console=tty0
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c131d000 soft=c12fd000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Xen reported: 2210.212 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
Software IO TLB enabled:
Aperture: 64 megabytes
Kernel range: c1eec000 - c5eec000
Address size: 27 bits
vmalloc area: e0800000-f4ffe000, maxmem 2d7fe000
Memory: 429176k/520192k available (2012k kernel code, 82640k
reserved, 833k data, 176k init, 0k highmem)
Checking if this processor honours the WP bit even in
supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4422.27
BogoMIPS (lpj=8844559)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary
module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 17899375 c3d19375
00000000 00000000 00000001 00000000 0000001a
CPU: After vendor identify, caps: 17899375 c3d19375 00000000
00000000 00000001 00000000 0000001a
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 17899375 c3d19375 00000000
00000410 00000001 00000000 0000001a
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
CPU 1 irqstacks, hard=c131e000 soft=c12fe000
ENABLING IO-APIC IRQs
SMP alternatives: switching to SMP code
Brought up 2 CPUs
Initializing CPU#1
CPU: After generic identify, caps: 17899375 c3d19375
00000000 00000000 00000001 00000000 0000001a
CPU: After vendor identify, caps: 17899375 c3d19375 00000000
00000000 00000001 00000000 0000001a
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 17899375 c3d19375 00000000 00000410
00000001 00000000 0000001a
migration_cost=117
checking if image is initramfs... it is
Freeing initrd memory: 6718k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
Error attaching device data
Error attaching device data
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:00:0d.0
PCI: Transparent bridge - 0000:00:04.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0,
disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0,
disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0,
disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0,
disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0,
disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0,
disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0,
disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0,
disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0,
disabled.
ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0,
disabled.
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0,
disabled.
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0,
disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try
"pci=routeirq". If it helps, post a report
pnp: 00:09: ioport range 0xa00-0xadf has been reserved
pnp: 00:09: ioport range 0xae0-0xaef has been reserved
PCI: Bridge: 0000:00:04.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:09.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384
bytes)
TCP established hash table entries: 16384 (order: 5, 131072
bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1212069455.156:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:09.0 to 64
pcie_portdrv_probe->Dev[03e8:10de] has invalid IRQ. Check
vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:09.0:pcie00]
PCI: Setting latency timer of device 0000:00:0b.0 to 64
pcie_portdrv_probe->Dev[03e9:10de] has invalid IRQ. Check
vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
pcie_portdrv_probe->Dev[03e9:10de] has invalid IRQ. Check
vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Real Time Clock Driver v1.12ac
hpet_acpi_add: no address or irqs in _CRS
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096
blocksize
Xen virtual console successfully installed as xvc0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
NFORCE-MCP61: IDE controller at PCI slot 0000:00:06.0
NFORCE-MCP61: chipset revision 162
NFORCE-MCP61: not 100% native mode: will probe irqs later
NFORCE-MCP61: 0000:00:06.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xffa0-0xffa7, BIOS
settings: hda:DMA, hdb:DMA
Probing IDE interface ide0...
hda: Maxtor 4R120L0, ATA DISK drive
hdb: LITEON DVD-ROM LTD163D, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: max request size: 128KiB
hda: 240121728 sectors (122942 MB) w/2048KiB Cache,
CHS=65535/16/63, UDMA(133)
hda: cache flushes supported
hda: hda1 hda2
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
/usr/src/xen-3.2-testing.hg/linux-2.6.18-xen.hg/drivers/usb/input/hid-core.c:
v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Freeing unused kernel memory: 176k freed
Write protecting the kernel read-only data: 367k
input: AT Translated Set 2 keyboard as /class/input/input0
forcedeth.c: Reverse Engineered nForce ethernet driver.
Version 0.56.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LMAC] ->
GSI 23 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:07.0 to 64
forcedeth: using HIGHDMA
0000:00:07.0: Invalid Mac address detected:
4f:91:e5:db:19:00
Please complain to your hardware vendor. Switching to a
random MAC.
eth0: forcedeth.c: subsystem: 01462:7309 bound to
0000:00:07.0
SCSI subsystem initialized
libata version 2.00 loaded.
sata_nv 0000:00:08.0: version 2.0
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LSA0] ->
GSI 22 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:08.0 to 64
ata1: SATA max UDMA/133 cmd 0xE400 ctl 0xE082 bmdma 0xD880
irq 17
ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xDC02 bmdma 0xD888
irq 17
scsi0 : sata_nv
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7, max UDMA/133, 976773168 sectors: LBA48 NCQ
(depth 0/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/133
scsi1 : sata_nv
ata2: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0xE007
Vendor: ATA
Model: ST3500630AS Rev: 3.AA
Type:
Direct-Access
ANSI SCSI revision: 05
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2
sd 0:0:0:0: Attached scsi disk sda
USB Universal Host Controller Interface driver v3.0
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller
(OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] ->
GSI 21 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus
number 1
ohci_hcd 0000:00:02.0: irq 18, io mem 0xdfffb000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] ->
GSI 20 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus
number 2
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device
0000:00:02.1
ehci_hcd 0000:00:02.1: irq 19, io mem 0xdfffac00
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10
Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised:
dm-devel@xxxxxxxxxx
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1212069461.924:2): selinux=0 auid=4294967295
hdb: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Floppy drive(s): fd0 is 1.44M
floppy0: Unable to grab DMA2 for the floppy driver
input: PC Speaker as /class/input/input1
sd 0:0:0:0: Attached scsi generic sg0 type 0
floppy0: no floppy controllers found
Floppy drive(s): fd0 is 1.44M
floppy0: Unable to grab DMA2 for the floppy driver
floppy0: no floppy controllers found
lp: driver loaded but no devices found
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.4 loaded
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2031608k swap on /dev/VolGroup01/LogVol01.
Priority:-1 extents:1 across:2031608k
Adding 2031608k swap on /dev/VolGroup00/LogVol01.
Priority:-2 extents:1 across:2031608k
audit(1212069483.088:3): audit_pid=1954 old=0 by
auid=4294967295
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
Bridge firewalling registered
peth0: Promiscuous mode enabled.
device peth0 entered promiscuous mode
eth0: port 1(peth0) entering learning state
eth0: topology change detected, propagating
eth0: port 1(peth0) entering forwarding state
peth0: Promiscuous mode enabled.
eth0: no IPv6 routers present
peth0: no IPv6 routers present
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
[root@localhost lib]#
No virus found in this outgoing message.
Checked by AVG.
Version: 7.5.524 / Virus Database: 269.24.3/1472 - Release Date: 5/29/2008 7:27
AM
Home