Hello,
I'm having a problem with network connection on created domains. I'm running Xen 3.2 on Ubuntu 8.04, server has 2 NICs but I use only one. I had no problems installing and running Xen, domU has normal network connection, but none of other domains.
My current test domain is set for dhcp, but it doesn't pick up any signal. Same situation was with fixed network settings, domain behaved as though it was "unplugged". Checked all settings on guest system, they seem to be more than fine. On host system, I am anxious about double eth0 in network-bridge status (see below), but I have no idea where it came from and how to get rid of it. I also failed to find anyone with similar problem.
Cheers,
Kamila Gador
Logs:
ifconfig @ domU:
eth0 Link encap:Ethernet HWaddr 00:1e:0b:85:01:e8 inet addr: 192.168.254.22 Bcast: 192.168.254.255 Mask: 255.255.255.0
inet6 addr: fe80::21e:bff:fe85:1e8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:42219 errors:0 dropped:0 overruns:0 frame:0 TX packets:10188 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0 RX bytes:19063875 (18.1 MB) TX bytes:2064657 (1.9 MB)
lo Link encap:Local Loopback inet addr: 127.0.0.1 Mask: 255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:6526 errors:0 dropped:0 overruns:0 frame:0 TX packets:6526 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:3333545 (3.1 MB) TX bytes:3333545 (3.1 MB)
peth0 Link encap:Ethernet HWaddr 00:1e:0b:85:01:e8 inet6 addr: fe80::21e:bff:fe85:1e8/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:41103 errors:0 dropped:0 overruns:0 frame:0
TX packets:11394 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:19511843 (18.6 MB) TX bytes:2499311 (2.3 MB) Interrupt:16
vif7.0 Link encap:Ethernet HWaddr fe:ff:ff:ff:ff:ff inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:1119 errors:0 dropped:0 overruns:0 frame:0
TX packets:109 errors:0 dropped:23957 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:365448 (356.8 KB) TX bytes:18734 (18.2 KB)
xenbr0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 inet6 addr: fe80::21e:bff:fe85:1e8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:1152 (1.1 KB)
network-bridge status:
21: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue link/ether 00:1e:0b:85:01:e8 brd ff:ff:ff:ff:ff:ff inet 192.168.254.22/24 brd 192.168.254.255 scope global eth0
inet6 fe80::21e:bff:fe85:1e8/64 scope link valid_lft forever preferred_lft forever 21: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue link/ether 00:1e:0b:85:01:e8 brd ff:ff:ff:ff:ff:ff
inet 192.168.254.22/24 brd 192.168.254.255 scope global eth0 inet6 fe80::21e:bff:fe85:1e8/64 scope link valid_lft forever preferred_lft forever
bridge name bridge id STP enabled interfaces eth0 8000.001e0b8501e8 no peth0 vif7.0 xenbr0 8000.000000000000 no
ifconfig @ testserver:
eth0 Link encap:Ethernet HWaddr 00:16:3E:16:AE:93 inet6 addr: fe80::216:3eff:fe16:ae93/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:1124 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:382824 (373.8 KiB)
lo Link encap:Local Loopback inet addr: 127.0.0.1 Mask: 255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Config files:
testserver.cfg
# # Kernel + memory size # kernel = '/boot/vmlinuz-2.6.24-16-xen' ramdisk = '/boot/initrd.img-2.6.24-16-xen' memory = '512'
# # Disk device(s). # root = '/dev/xvda2 ro' disk = [ 'tap:aio:/home/xen/domains/test2/swap.img,xvda1,w', 'tap:aio:/home/xen/domains/test2/disk.img,xvda2,w',
]
# # Hostname # name = 'testserver'
# # Networking # dhcp = 'dhcp' vif = [ 'mac=00:16:3E:16:AE:93' ]
# # Behaviour # >on_reboot = 'restart' on_crash = 'restart'
extra = '2 console=xvc0'
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|