| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
[Xen-users] Re: eth1 changed to __tmp78668633 in recent kernels
Am Donnerstag, den 15.05.2008, 13:06 +0200 schrieb henry ritzlmayr:
> Hi list,
>
> kernel-xen-2.6.18-53.1.14.el5 and
> kernel-xen-2.6.18-53.1.19.el5
> do not detect/initialize/whatever my eth1 network card any more.
>
> With
> kernel-xen-2.6.18-53.1.13.el5
> everything is working as expected.
>
> With the two recent kernels I only get an Interface named __tmp786686833
> which is not added to xenbr...
>
> lspci -v to the adapter in question says
>
> 02:00.0 Ethernet controller: Intel Corporation 82572EI Gigabit Ethernet
> Controller (Copper) (rev 06)
> Subsystem: Intel Corporation PRO/1000 PT Desktop Adapter
> Flags: bus master, fast devsel, latency 0, IRQ 17
> Memory at febe0000 (32-bit, non-prefetchable) [size=128K]
> Memory at febc0000 (32-bit, non-prefetchable) [size=128K]
> I/O ports at ec00 [size=32]
> Expansion ROM at feba0000 [disabled] [size=128K]
> Capabilities: [c8] Power Management version 2
> Capabilities: [d0] Message Signalled Interrupts: 64bit+
> Queue=0/0 Enable-
> Capabilities: [e0] Express Endpoint IRQ 0
>
> ip link says
>
> 2: __tmp786686833: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
> link/ether 00:1b:21:0e:a9:3b brd ff:ff:ff:ff:ff:ff
>
> In modprobe.conf I have
> alias eth1 e1000
> for the adapter in question. The module itself is loaded.
>
>
>
> Any Ideas how to fix this?
>
> cheers
> Henry
Sorry for the noise - this should have gone into the CentOS List.
cheers
Henry
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home