Hi Sadique,
Can I have your help.
the problem is that i have centos 5.1 as the OS which has a default
xen-.3.0.3-25.el5.
when ever i try to install new guest(rhel5 or windows xp) it gives
following error:
Kernel panic - not syncing: Attempted to kill init!
i hav attached the config file.
full out put is here.
Using config file "/root/Desktop/xmexample/xm2".
Started domain Rhel5
Linux version 2.6.18-8.el5xen (mockbuild@xxxxxxxxxxxxxxxxxxx
<mailto:mockbuild@xxxxxxxxxxxxxxxxxxx>) (gcc version 4.1.1 20070105
(Red Hat 4.1.1-52)) #1 SMP Thu Mar 15 21:02:53 EDT 2007
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000020800000 (usable)
0MB HIGHMEM available.
520MB LOWMEM available.
NX (Execute Disable) protection: active
ACPI in unprivileged domain disabled
Built 1 zonelists. Total pages: 133120
Kernel command line: root=/dev/sda ro
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c071b000 soft=c06fb000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Xen reported: 2094.748 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Software IO TLB disabled
vmalloc area: e1000000-f4ffe000, maxmem 2d7fe000
Memory: 510080k/532480k available (2017k kernel code, 13744k reserved,
824k data, 172k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor
mode... Ok.
Calibrating delay using timer specific routine.. 5238.88 BogoMIPS
(lpj=10477768)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
Brought up 1 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 3373k freed
Grant table initialized
NET: Registered protocol family 16
ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread C06CAAA0 could
not acquire Mutex [2] [20060707]
Brought up 1 CPUs
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
IA-32 Microcode Update Driver: v1.14-xen <tigran@xxxxxxxxxxx
<mailto:tigran@xxxxxxxxxxx>>
audit: initializing netlink socket (disabled)
audit(1210058158.840:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key EE79A493AEE5EDC9
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Event-channel device installed.
Console: switching to colour frame buffer device 100x37
input: Xen Virtual Keyboard/Mouse as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with
idebus=xx
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
XENBUS: Device with no driver: device/vbd/768
XENBUS: Device with no driver: device/vif/0
Freeing unused kernel memory: 172k freed
Write protecting the kernel read-only data: 355k
USB Universal Host Controller Interface driver v3.0
SCSI subsystem initialized
Kernel panic - not syncing: Attempted to kill init!
can i even know the difference between sdx and hdx (x=a,b,c....)
Thanks & Regards
san
Home