On Tue, 2008-04-22 at 10:49 +0200, Martin Adolfsson wrote:
> Hi all,
>
> I am having trouble getting a RAID card (more specifically the 3Ware
> 9650SE-4LPML) working on Xen (64-bit).
>
> When using a vanilla (non-Xen) kernel, the card is successfully detected
> by the 3w_9xxx driver.
>
> When booting a custom built xen0 kernel, including the 3w_9xxx driver,
> the driver is loaded (I see the driver identification in dmesg), but
> doesn't seem to find any device to attach to. I.e. no additional output
> from the driver.
>
> I have also attempted to bundle the driver in a initrd-package, but with
> the same result; I see the driver being loaded but no other output from it.
>
> I took a quick look at the source code for the driver, but didn't see
> any options for enabling debugging messages.
>
> Are there some know issues with 64-bit Xen and the 3w_9xxx driver?
>
> Regards,
> Martin Adolfsson
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
I have a 9650SE-8LP on the current Centos 5.1 x86_64 Xen kernel
operating with no problems. Admittedly it isn't very busy at the
moment, but it is detected no problem.
The Centos kernel is 2.6.18-53.1.14.el5xen.
Dmesg output:
3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
ACPI: PCI Interrupt 0000:0b:00.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:0b:00.0 to 64
scsi0 : 3ware 9000 Storage Controller
3w-9xxx: scsi0: Found a 3ware 9000 Storage Controller at 0xbab00000,
IRQ: 16.
3w-9xxx: scsi0: Firmware FE9X 3.08.00.016, BIOS BE9X 3.08.00.004, Ports:
8.
Vendor: AMCC Model: 9650SE-8LP DISK Rev: 3.08
Type: Direct-Access ANSI SCSI revision: 05
signature.asc
Description: This is a digitally signed message part
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home