|
|
|
|
|
|
|
|
|
|
xen-users
[Xen-users] Problem with multiple interfaces in DomUs / network-route
Hello,
I have a couple of webservers having 1 public ip (eth0) and having an internal
network
as well (eth1). I got a subnet for a new server which is routed to the main ip
of the server.
So i just installed Xen on one of the servers. Configured Xen to run on
network-routed.
Using only eth0 routing works fine!
I tried to get the internal interface (eth1) into the DomUs, too!
Modified the configuration of the VM to:
vif = [ 'ip=78.xx.xx.xx, vifname=eth2', 'ip=192.168.62.100, vifname=eth10' ]
The VM has 2 interfaces now. Pinging the local network is not possible, even
pinging my other servers (same subnet as Dom0) isn't possible anymore.
ifconfig in Dom0 displays:
eth10 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet addr:<public IP of Dom0> Bcast:88.255.255.255
Mask:255.255.255.255
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:117 errors:0 dropped:0 overruns:0 frame:0
TX packets:72 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:7006 (6.8 KiB) TX bytes:5768 (5.6 KiB)
Is it possible to use bridged and routed network in Xen side-by-side? (public
eth0 routed, eth1 bridged?)
Or is there any easier solution for the given problem?
Does anyone have sort of a same setup and could give me a hint?
I'm using xen-hypervisor-3.0.3-1-amd64 on a Debian etch system.
Thanks,
PMO
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
<Prev in Thread] |
Current Thread |
[Next in Thread> |
- [Xen-users] Problem with multiple interfaces in DomUs / network-route,
Pirmin Mösle <=
|
|
|
|
|