Hi,
we've done this with a fritz pci isdn card successfully.
as that machine in no way uses the isdn stack at dom0,
i removed the kernel module and rebuild the dom0's initrd
without this module (I didn't trust the /etc/modprobe ;) )
one line from the lspci:
03:01.0 Network controller: AVM Audiovisuelles MKTG & Computer System GmbH
Fritz!PCI v2.0 ISDN (rev 02)
the grub entry:
title Xen 3.1-i386-pae / Ubuntu, kernel 2.6.20-100-server
root (hd0,1)
kernel /xen-3.1-i386-pae.gz
module /vmlinuz-2.6.20-100-server
root=UUID=09503299-c560-45de-b69d-8d98eadc7b23 ro console=tty0 irq=poll
pciback.hide=(03:01.0)
module /initrd.img-2.6.20-100-server
quiet
savedefault
the domU conf:
kernel = '/boot/vmlinuz-2.6.19-4-server'
ramdisk = '/boot/initrd.img-2.6.19-4-server'
memory = '1832'
cpus="0"
root = '/dev/sda1 ro'
disk = [ 'phy:vg0/XXXXX-disk,sda1,w', 'phy:vg0/XXXXX-swap,sda2,w' ]
name = 'XXXXX'
vif = [ 'mac=XX:XX:XX:XX:XX, bridge=xenbr0', ' mac=XX:XX:XX:XX:XX:XX,
bridge=xenbr1' ]
pci = [ '03:01.0' ]
on_poweroff = 'destroy'
on_reboot = 'restart'
on_crash = 'restart'
Hope this helps.
Regards,
Stephan
Gerhard Possler schrieb:
>
> Hi all,
>
> did somebody successfuly export ISDN Cards to DomU?
>
> I want to have 2 ISDN Cards in DomU (for Asterisk with mISDN)
> lspci -vt
> -[0000:00]-+-00.0 nVidia Corporation MCP55 Memory Controller
> +-01.0 nVidia Corporation MCP55 LPC Bridge
> ...
> +-05.1 nVidia Corporation MCP55 SATA Controller
> +-06.0-[0000:01]--+-00.0 Cologne Chip Designs GmbH ISDN
> network controller [HFC-PCI]
> | +-01.0 Cologne Chip Designs GmbH ISDN
> network controller [HFC-PCI]
> | \-02.0 S3 Inc. 86c764/765 [Trio32/64/64V+]
> +-06.1 nVidia Corporation MCP55 High Definition Audio
>
> There are 2 ISDN Card under following PCI Adresses: 0000:01:00.0 and
> 0000:01:01.0
>
> so under /boot/grub/menu.lst:
> title XEN -- openSUSE 10.3 - PAE
> root (hd0,4)
> kernel /xen-pae.gz pciback.hide=(0000:01:00.0)(0000:01:01.0)
> module /vmlinuz-2.6.22.13-0.3-xenpae
> root=/dev/mapper/nvidia_deihceca_part7 vga=normal
> resume=/dev/mapper/nvidia_deihceca_part6 splash=silent showopts
> module /initrd-2.6.22.13-0.3-xenpae
>
> and under /etc/modprobe.conf.local:
> options pciback hide=(0000:01:00.0)(0000:01:01.0)
> install hfcpci /sbin/modprobe pciback ; /sbin/modprobe --first-time
> --ignore-install hfcpci
>
> even combinations of above config and also when using the address short
> form 01:00.0 and 01:01.0 does't export the device, in all cases the
> start of DomU shows:
> Using config file "/etc/xen/vm/opensuse".
> Error: pci: failed to locate device and parse it's resources - [Errno 2]
> No such file or directory: '/sys/bus/pci/devices/0000:01:00.0/driver'
>
> DomU config file is:
> name="opensuse"
> ostype="opensuse"
> uuid="b24449ce-e89a-b107-a96a-da91ce26651f"
> memory=384
> vcpus=1
> on_crash="destroy"
> on_poweroff="destroy"
> on_reboot="restart"
> localtime=0
> builder="linux"
> bootloader="/usr/lib/xen/boot/domUloader.py"
> bootargs="--entry=xvda2:/boot/vmlinuz-xenpae,/boot/initrd-xenpae"
> disk=[ 'file:/srv/xen/opencave/hda,xvda,w', ]
> vif=[ 'mac=00:16:3e:00:00:01', ]
> nographic=1
> pci=[ '01,00,0', '01,01,0' ]
>
> I don't belive it is the openSUSE kernel 2.6.22.13-0.3-xenpae because on
> an identical system with an 3Com NIC the export of the PCI device works
> perfect...
> Here it's enough to set in /etc/modprobe.conf.local:
> options pciback hide (02:0d.0)
> install 3c59x /sbin/modprobe pciback ; /sbin/modprobe --first-time
> --ignore-install 3c59x
>
> also commenting out the eth1 device in /etc/modprobe.conf and remove
> network config for eth1.
>
>
> I'm a little bit confused because the working mISDN doesn't show an any
> hfcpci device under /sys/bus/pci/drivers that i could unbind...
>
>
> So the question is did somebody export ISDN PCI devices to DomU (Vendor
> doesn't matter)
>
> Mit freundlichen Grüßen / with kind regards
> *Gerhard Possler*
> IT Architect
> IBM Enterprise Linux Services_
> __ELS Wiki_ <http://w3.webahead.ibm.com/w3ki/display/ELSde>@IBM (only
> accessible via IBM intranet) *IT-Services and Solutions GmbH*
> Rathausstr. 7, D-09111 Chemnitz
> Geschäftsführung: Rainer Laier, Michael Mai
> Sitz der Gesellschaft: Chemnitz
> Registergericht: Amtsgericht Chemnitz, HRB 18409_
> __http://www.itsas.de/_ *gerhard.possler@xxxxxxxxxx*
> Mobil +49 (0) 160 90578637
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
--
Stephan Seitz
Senior System Administrator
*netz-haut* e.K.
multimediale kommunikation
zweierweg 22
97074 würzburg
fon: +49 931 2876247
fax: +49 931 2876248
web: www.netz-haut.de <http://www.netz-haut.de/>
registriergericht: amtsgericht würzburg, hra 5054
s_seitz.vcf
Description: Vcard
signature.asc
Description: OpenPGP digital signature
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home