Hi,
Just to add some more information so you might be able to know better
where I'm going wrong.
I added the file /etc/yum.repos.d/CentOS-Base.repo
and pasted this
http://ruckman.net/tech/wp-content/uploads/2007/05/centos-baserepo.txt
into it. and changed all 4's for 4.5's (I need centos4.5).
Then I did a
# yum --enablerepo=centosplus
There was lots of net traffic and all seemed well.
But.
yum -c yum.conf --installroot=/mnt/ -y groupinstall Base
Warning, could not load sqlite, falling back to pickle
Setting up Group Process
Setting up repositories
not using ftp, http[s], or file for repos, skipping - enabled=1
base 100% |=========================| 951 B 00:00
Error: No Groups on which to run command
Thanks again. (I hope this isn't turning into an off-topic)
Chris.
On Dec 4, 2007 10:44 AM, Chris Fanning <christopher.fanning@xxxxxxxxx> wrote:
> Thankyou very much for your detailed instructions.
>
> I'm stuck with this error
> Error: No Groups on which to run command
>
> I have edited
>
> diff comps.py.orig comps.py
> 124c124
> < if type not in ('mandatory', 'default', 'optional'):
> ---
> > if type not in ('mandatory', 'default', 'optional',
> > 'conditional'):
> 143c143
> < if type not in ('mandatory', 'default', 'optional'):
> ---
> > if type not in ('mandatory', 'default', 'optional',
> > 'conditional'):
>
> And my xen-yum.conf lokk like this.
>
> [main]
> cachedir=/var/cache/yum
> debuglevel=2
> logfile=/var/log/yum.log
> exclude=*-debuginfo
> gpgcheck=0
> obsoletes=1
> reposdir=/dev/null
>
> [base]
> name=CentOS-4.5 - Plus
> baseurl=http://mirror.centos.org/centos/4.5/centosplus/i386/ enabled=1
>
> Where do you think I'm going wrong?
>
> Thanks.
> Chris.
>
>
>
> On Dec 1, 2007 8:58 PM, Igor Chubin <igor@xxxxxxx> wrote:
> > On Fr, Nov 30, 2007 at 06:46:52 +0100, Chris Fanning wrote:
> > > Hi,
> > >
> > > I'd like to know how to install centos (4.5 in my case) to run as a
> > > domU on a dom0 running etch.
> > >
> > > Any tips please?
> >
> > Make sure that you have enough free space
> > on the file system where you are going to make image for centos
> > (or create PV if you are going to use LVM).
> >
> > # df -h
> > # dd if=/dev/zero of=centos.img count=1 bs=1k seek=$[2*1024*1024]
> > # mkfs.ext3 centos.img
> > # mount -o loop centos.img /mnt
> >
> >
> > Now you have 2G-size image with ext3 filesystem mounted to /mnt directory.
> >
> > After that:
> >
> > # apt-get install yum
> > # yum -c /tmp/yum-xen.conf --installroot=/mnt -y groupinstall Base
> >
> >
> > where you-xen.conf file should look like:
> >
> > ===================================================
> > [main]
> > cachedir=/var/cache/yum
> > debuglevel=2
> > logfile=/var/log/yum.log
> > exclude=*-debuginfo
> > gpgcheck=0
> > obsoletes=1
> > reposdir=/dev/null
> >
> > [base]
> > name=CentOS-$releasever - Plus
> > baseurl=http://mirror.centos.org/centos/$releasever/centosplus/$basearch/
> > enabled=1
> > ===================================================
> >
> >
> >
> > if you have the error during installation
> > ------------------------------------------------
> > Failed to add groups file for repository: base
> > Error: No Groups on which to run command
> > ------------------------------------------------
> >
> > then modify yum code like shown below:
> >
> > ------------------------------------------------
> > # cp /usr/share/python-support/yum/yum/comps.py{,.ORIG}
> > # vi /usr/share/python-support/yum/yum/comps.py
> > # diff /usr/share/python-support/yum/yum/comps.py{.ORIG,}
> > 124c124
> > < if type not in ('mandatory', 'default',
> > 'optional'):
> > ---
> > > if type not in ('mandatory', 'default',
> > > 'optional', 'conditional'):
> > 143c143
> > < if type not in ('mandatory', 'default',
> > 'optional'):
> > ---
> > > if type not in ('mandatory', 'default',
> > > 'optional', 'conditional'):
> > ------------------------------------------------
> >
> >
> >
> > Create several directories and device files:
> >
> > %# /mnt/{dev,proc,etc}
> > %# for i in console null zero ; do /sbin/MAKEDEV -d /mnt/dev -x $i ;
> > %done
> >
> > Disable TLS.
> >
> > %# mv /mnt/lib/tls /mnt/lib/tls-disabled
> >
> > Create /etc/fstab
> > (of course you must specify correct device files)
> >
> > %# cat <<EOL > /mnt/etc/fstab
> > /dev/sda1 / ext3 defaults 1 1
> > none /dev/pts devpts
> > gid=5,mode=620 0 0
> > none /dev/shm tmpfs defaults 0 0
> > none /proc proc defaults 0 0
> > none /sys sysfs defaults 0 0
> > #/dev/sda2 /mnt ext3 defaults 1 2
> > #/dev/sda3 swap swap defaults 0 0
> > EOL
> >
> >
> >
> > Setup network interfaces
> > (I suppose that you use one interface which should acquire
> > its IP-address via DHCP).
> >
> >
> > %# cat <<EOL > /mnt/etc/sysconfig/network
> > NETWORKING=yes
> > HOSTNAME=localhost.localdomain
> > EOL
> >
> > cat <<EOL > /mnt/etc/sysconfig/network-scripts/ifcfg-eth0
> > ONBOOT=yes
> > DEVICE=eth0
> > BOOTPROTO=dhcp
> > EOL
> >
> >
> >
> >
> > Copy kernel modules to the domU filesystem
> > (alternatively you can install Xenified Linux Kernel
> > inside domU using yum).
> >
> > %# cp -R /lib/modules/2.6.*xen* /mnt/lib/modules/
> >
> >
> > Set root password for domU:
> >
> >
> > %$ sudo chroot /mnt
> > bash-3.1# pwconv
> > bash-3.1# passwd
> > Changing password for user root.
> > New UNIX password:
> > Retype new UNIX password:
> > passwd: all authentication tokens updated successfully.
> > bash-3.1# exit
> >
> >
> >
> > That's all.
> > No you may umount your image and make
> >
> > %# xm create -c centos
> >
> > centos here is the name of the Xen domain config file
> > which will run the image that you have prepared.
> >
> >
> >
> >
> > >
> > > Thanks.
> > > Chris.
> > >
> > > _______________________________________________
> > > Xen-users mailing list
> > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > http://lists.xensource.com/xen-users
> >
> > --
> > WBR, i.m.chubin
> >
> >
>
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home