Re: [Xen-users] VNC to HVM not starting

[Yves-Gaël Chény <yves-gael.cheny@xxxxxxxxxxxxxxxxxxxxxx>]

two things :

- in the xend-config, if you have a listen 127.0.0.1 you can use 
vncviewer only on the local server. try 0.0.0.0
- perhaps you have an iptables running

regards
yves

Scott Serr a écrit :
> My dom0 is Gentoo and I'm trying to boot an HVM off of a Ubuntu Feisty 
> ISO image.
> I apparently have X already listening on 5900... for the "shared 
> desktop" feature of the modern X servers.
> So I have:
>
> vnc=1
> vncdisplay=6
> vncconsole=1
>
> I've left out the vncdisplay and vncconsole in trials.  Still (netstat 
> says) nothing is listening on 5901 or 5906 for my vncviewer to connect 
> to.  In /etc/xen/xend-config I have vnc-listen '127.0.0.1' and a 
> vncpasswd set.
> I ran across xenstore-ls.  I see this:
>   backend = ""
>    vfb = ""
>     1= ""
>      0 = ""
>       vncunused = "1"
>       ....
>     2 = ""
>      0 = ""
>       vncunused = "1"
>       ....
>
> Does the vncunused shown here indicate a problem?
>
> Could it be the build of Xen on Gentoo?
>
> Thanks,
> Scott Serr
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
--
Yves-Gaël Chény
Directeur technique

44 Boulevard des Pas Enchantés
44230 St Sébastien sur Loire
Tel : 02 40 97 62 67 - 08 73 77 24 91
GSM : 06 98 58 41 55
http://www.tranquilitsystems.com/
yves-gael.cheny@xxxxxxxxxxxxxxxxxxxxxx

Tranquil IT Systems . SAS 37 000 ¤



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users