WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

[Xen-users] Network down after /etc/xen/scripts/network-bridge

To: <xen-users@xxxxxxxxxxxxxxxxxxx>
Subject: [Xen-users] Network down after /etc/xen/scripts/network-bridge
From: "Marc A. Müller" <xen17@xxxxxxxxxx>
Date: Fri, 7 Sep 2007 15:55:10 +0200
Delivery-date: Fri, 07 Sep 2007 06:55:40 -0700
Envelope-to: www-data@xxxxxxxxxxxxxxxxxx
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
Thread-index: AcfxVrSIMsBv0VDvTRWG0hEgb89KkQ==
Hi,

I'm trying to install XEN 3.1.0 on a OpenSUSE 10.2 server (self configured
kernel 2.6.18).

My XenU-kernel is booting. After starting "xend start", my network is down:
Neither I can reach other hosts, nor is the server reachable from other
hosts.

Here is the output from "ifconfig" and "route -n" BEFORE starting "xend"
(the network address is replaced by AAA.BBB.CCC):

**********************************************************************
**********************************************************************

eth0      Protokoll:Ethernet  Hardware Adresse 00:19:D1:02:FA:4D  
          inet Adresse:AAA.BBB.CCC.58  Bcast:AAA.BBB.CCC.255
Maske:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1251 errors:0 dropped:0 overruns:0 frame:0
          TX packets:629 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 Sendewarteschlangenlänge:1000 
          RX bytes:125722 (122.7 Kb)  TX bytes:202013 (197.2 Kb)
          Basisadresse:0x20e0 Speicher:50200000-50220000 

lo        Protokoll:Lokale Schleife  
          inet Adresse:127.0.0.1  Maske:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:12 errors:0 dropped:0 overruns:0 frame:0
          TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 Sendewarteschlangenlänge:0 
          RX bytes:1218 (1.1 Kb)  TX bytes:1218 (1.1 Kb)

Kernel IP Routentabelle
Ziel            Router          Genmask         Flags Metric Ref    Use
Iface
AAA.BBB.CCC.0     0.0.0.0         255.255.255.0   U     0      0        0
eth0
169.254.0.0     0.0.0.0         255.255.0.0     U     0      0        0 eth0
127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0 lo
0.0.0.0         AAA.BBB.CCC.1     0.0.0.0         UG    0      0        0
eth0

**********************************************************************
**********************************************************************

And here is the output from "ifconfig" and "/etc/xen/scripts/network-bridge
status" AFTER starting "xend":

eth0      Link encap:Ethernet  HWaddr 00:19:D1:02:FA:4D  
          inet addr:AAA.BBB.CCC.58  Bcast:AAA.BBB.CCC.255
Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:370 errors:0 dropped:0 overruns:0 frame:0
          TX packets:30 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:20701 (20.2 Kb)  TX bytes:1260 (1.2 Kb)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:9 errors:0 dropped:0 overruns:0 frame:0
          TX packets:9 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:894 (894.0 b)  TX bytes:894 (894.0 b)

peth0     Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF  
          UP BROADCAST NOARP  MTU:1500  Metric:1
          RX packets:3680 errors:0 dropped:0 overruns:0 frame:0
          TX packets:295 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:384634 (375.6 Kb)  TX bytes:38613 (37.7 Kb)
          Base address:0x20e0 Memory:50200000-50220000 

vif0.0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF  
          UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
          RX packets:30 errors:0 dropped:0 overruns:0 frame:0
          TX packets:370 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:1260 (1.2 Kb)  TX bytes:20701 (20.2 Kb)

xenbr0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF  
          UP BROADCAST RUNNING NOARP  MTU:1500  Metric:1
          RX packets:148 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:10816 (10.5 Kb)  TX bytes:0 (0.0 b)

============================================================
4: eth0: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc noqueue 
    link/ether 00:19:d1:02:fa:4d brd ff:ff:ff:ff:ff:ff
    inet AAA.BBB.CCC.58/24 brd AAA.BBB.CCC.255 scope global eth0
11: xenbr0: <BROADCAST,NOARP,UP,10000> mtu 1500 qdisc noqueue 
    link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff
 
bridge name     bridge id               STP enabled     interfaces
xenbr0          8000.feffffffffff       yes             vif0.0
                                                        peth0
 
AAA.BBB.CCC.0/24 dev eth0  proto kernel  scope link  src AAA.BBB.CCC.58 
169.254.0.0/16 dev eth0  scope link 
127.0.0.0/8 dev lo  scope link 
default via AAA.BBB.CCC.1 dev eth0 
 
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use
Iface
AAA.BBB.CCC.0     0.0.0.0         255.255.255.0   U     0      0        0
eth0
169.254.0.0     0.0.0.0         255.255.0.0     U     0      0        0 eth0
127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0 lo
0.0.0.0         AAA.BBB.CCC.1     0.0.0.0         UG    0      0        0
eth0
============================================================


As far as I can see, everything seems to be correct, isn't it?

I set all IPTABLES-policies to "ACCEPT" and switched on the forwarding, but
the network remains down.

The server is part of a university network with very restrictive rules. I
think only traffic from registered network cards (MAC registered) is
accepted.
Can this make trouble?
But the MAC is transferred correctly in my example?

Could it be a wrong kernel configuration?

Has to newly created eth0 to be a port of xenbr0 (it's not yet)?
If not, how can I reach the bridge (and the outside world), I can see no
routing to it?
Or is eth0 connected with vif0.0?

I'm new in bridges and Xen, so please be patient :-)
The documentation I read doesn't cover these (for newbies like me)


Thank You for Your time,


Marc Mueller



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

<Prev in Thread] Current Thread [Next in Thread>