WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

[Xen-users] Solved: Correction: Hotplug scripts not working (error start

To: "Xen Users" <xen-users@xxxxxxxxxxxxxxxxxxx>
Subject: [Xen-users] Solved: Correction: Hotplug scripts not working (error starting DomU)
From: Derek <xen@xxxxxxxxxxxxxxxx>
Date: Mon, 23 Jul 2007 19:17:25 -0600
Delivery-date: Mon, 23 Jul 2007 18:15:21 -0700
Dkim-signature: a=rsa-sha1; c=relaxed/relaxed; d=gmail.com; s=beta; h=domainkey-signature:received:received:message-id:date:from:sender:to:subject:mime-version:content-type:x-google-sender-auth; b=i64IGSKCDfU7DrytxYjIf7qigcWFBzd+pkGpNvo9TuS4t1sbRR/yH8dNmg7W0v7V6aRzJRb5aCUKeEfG5WSL01aTsafS2GK4s2IL/Ho+QOKVHFPdSv+dAhpwDpAjcyiFERuDYE3UNX0sxPKculP9Ixeg/bTBjrJZ0cLFl3ndGeE=
Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=beta; h=received:message-id:date:from:sender:to:subject:mime-version:content-type:x-google-sender-auth; b=NjOnsv3QQL6Zzhnhl6PdBUj3lFXLc4w29Uo1L87gVRU8TobqNOO78IXEYfiXVD7KKuyWflC9wR4d7SDUFGScWs86g+twzq4cP2HKiuf7GU92a0oI0WXxYSTh2ORxFqGYq+9Jnk/J8pCwlVF5NITXlPyrjOSzGBt/f+OI5t1GhYI=
Envelope-to: www-data@xxxxxxxxxxxxxxxxxx
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
OK problem solved.

Turned out to be a hardware problem.  The CDROM had died.  I didn't figure it out until I tried rebooting the system under a different OS, and found the cdrom could not be accessed.  Replaced it, and DomU behaves perfectly again.

Derek.

On 7/19/07, Derek <xen@xxxxxxxxxxxxxxxx> wrote:
One more relevent fact....
 
The problem has something to do with the CDROM.
 
When I remove the cdrom from the "vif=[...]" line in the config file, the domU starts up and runs perfectly.
 
Derek.

 
On 7/18/07, Derek <xen@xxxxxxxxxxxxxxxx> wrote:
Correction:

I wrote...

> By the way, I'm pretty sure my hotplug scrips are indeed NOT working.
> Used to be when I did a "tail -v /var/log/messages" and then plugged
> and unplugged usb devices, there were messages for each connection
> and disconnection.  Now, I see no such messages when I plug/unplug
> USB devices.  But I don't know what I did to break them, or how to fix them!

I think this is a red herring.  I tried it again, and in fact it _does_ report attachment and detachment of USB devices.  I had accidentally unplugged the wrong device when I tried it the first time, from a hub attached to a different computer!  Sorry for the misinformation.

Derek.


On 7/18/07, Derek <xen@xxxxxxxxxxxxxxxx> wrote:
Hi all,

I can no longer start my windows domU under xen.  Googling the error message it seems this is a common problem, but from a huge diversity of causes, none of which help me figure things out.

The message I see when I start my domU (winxp) is:

  Error: Device 5632 (vbd) could not be connected. Hotplug scripts not working.

This occurs about 30 seconds after starting the domain.  xm list during that time shows the domain paused.  If you unpause it, you see some windows boot activity, but you still get the same message and failure at about the 30 second mark.

This is on a system that was previously working.  It has been running continuously for about a month, and this occurred right after the last reboot.  I can't think of any configuration changes I have made since it last worked OK, although I suppose there might be some.

By the way, I'm pretty sure my hotplug scrips are indeed NOT working.  Used to be when I did a "tail -v /var/log/messages" and then plugged and unplugged usb devices, there were messages for each connection and disconnection.  Now, I see no such messages when I plug/unplug USB devices.  But I don't know what I did to break them, or how to fix them!

"/etc/init.d/hotplug restart" works fine without error, but does not fix the problem.

Any pointers would be appreciated.

Thanks,
Derek.


My system is:

  Running xen-3.0.4 under  Gentoo  x86
 
uname -a
Linux localhost 2.6.16.33-xen #25 SMP Mon Feb 12 13:57:39 MST 2007 i686 Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz GenuineIntel GNU/Linux


My HVM domiain config file is:

import os, re
arch = os.uname()[4]
if re.search('64', arch):
    arch_libdir = 'lib64'
else:
    arch_libdir = 'lib'
kernel = "/usr/lib/xen/boot/hvmloader"
builder='hvm'
memory = 512
name = "WindowsXP"
usb = 1
usbdevice = "tablet"
vif = [ 'type=ioemu, mac=00:16:3e:00:00:94, bridge=xenbr0' ]
disk = [ 'phy:/dev/main/win_xp_guest_domain,hda,w', 'phy:/dev/cdrom,hdc:cdrom,r']
device_model = '/usr/' + arch_libdir + '/xen/bin/qemu-dm'
boot="c"
sdl=1
vnc=0
vncviewer=0
stdvga=0
serial='pty'
ne2000=0
audio=1
soundhw='all'
localtime=0



xm dmesg seems uneventful:
__  __            _____  ___  _  _      _
 \ \/ /___ _ __   |___ / / _ \| || |    / |
  \  // _ \ '_ \    |_ \| | | | || |_ __| |
  /  \  __/ | | |  ___) | |_| |__   _|__| |
 /_/\_\___|_| |_| |____(_)___(_) |_|    |_|

 http://www.cl.cam.ac.uk/netos/xen
 University of Cambridge Computer Laboratory

 Xen version 3.0.4-1 (root@) (gcc version 3.4.6 (Gentoo 3.4.6-r1, ssp-3.4.5-1.0, pie-8.7.9)) Tue Jan 23 22:14:27 MST 2007
 Latest ChangeSet: unavailable

(XEN) Command line: (hd0,0)/xen-3.0.4-1.gz dom0_mem=262144
(XEN) Physical RAM map:
(XEN)  0000000000000000 - 000000000009d800 (usable)
(XEN)  000000000009d800 - 00000000000a0000 (reserved)
(XEN)  00000000000f0000 - 0000000000100000 (reserved)
(XEN)  0000000000100000 - 000000007fedf800 (usable)
(XEN)  000000007fedf800 - 000000007fee0000 (reserved)
(XEN)  000000007fee0000 - 000000007fee3000 (ACPI NVS)
(XEN)  000000007fee3000 - 000000007fef0000 (ACPI data)
(XEN)  000000007fef0000 - 000000007ff00000 (reserved)
(XEN)  00000000f0000000 - 00000000f4000000 (reserved)
(XEN)  00000000fec00000 - 0000000100000000 (reserved)
(XEN) System RAM: 2046MB (2095600kB)
(XEN) ACPI: RSDP (v000 HP-CPC                                ) @ 0x000f7cf0
(XEN) ACPI: RSDT (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fee3040
(XEN) ACPI: FADT (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fee30c0
(XEN) ACPI: MCFG (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fee77c0
(XEN) ACPI: MADT (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fee76c0
(XEN) ACPI: SSDT (v001 HP-CPC  Cpu0Ist 0x00003000 INTL 0x20040311) @ 0x7fee7840
(XEN) ACPI: SSDT (v001 HP-CPC    CpuPm 0x00003000 INTL 0x20040311) @ 0x7fee7cd0
(XEN) ACPI: DSDT (v001 HP-CPC AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
(XEN) NUMA turned off
(XEN) Faking a node at 0000000000000000-000000007fedf000
(XEN) Domain heap initialised: DMA width 30 bits
(XEN) Xen heap: 10MB (10320kB)
(XEN) PAE disabled.
(XEN) found SMP MP-table at 000f5f90
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 6:15 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
(XEN) Processor #1 6:15 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode:  Flat.  Using 1 I/O APICs
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 2133.454 MHz processor.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz stepping 06
(XEN) Mapping cpu 0 to node 255
(XEN) Booting processor 1/1 eip 90000
(XEN) Initializing CPU#1
(XEN) Mapping cpu 1 to node 255
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 2048K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) VMXON is done
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#1.
(XEN) CPU1: Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz stepping 06
(XEN) Total of 2 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN)  -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) checking TSC synchronization across 2 CPUs: passed.
(XEN) Platform timer is 1.193MHz PIT
(XEN) Brought up 2 CPUs
(XEN) Machine check exception polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Domain 0 kernel supports features = { 0000001f }.
(XEN) Domain 0 kernel requires features = { 00000000 }.
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN)  Dom0 alloc.:   03000000->04000000 (61440 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN)  Loaded kernel: c0100000->c05d7c68
(XEN)  Init. ramdisk: c05d8000->c0ab5000
(XEN)  Phys-Mach map: c0ab5000->c0af5000
(XEN)  Start info:    c0af5000->c0af546c
(XEN)  Page tables:   c0af6000->c0afa000
(XEN)  Boot stack:    c0afa000->c0afb000
(XEN)  TOTAL:         c0000000->c0c00000
(XEN)  ENTRY ADDRESS: c0100000
(XEN) Dom0 has maximum 2 VCPUs
(XEN) Initrd len 0x4dd000, start at 0xc05d8000
(XEN) Scrubbing Free RAM: ..................done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen).



dmesg says this:

Linux version 2.6.16.33-xen (root@localhost) (gcc version 3.4.6 (Gentoo 3.4.6-r1, ssp-3.4.5-1.0, pie-8.7.9)) #25 SMP Mon Feb 12 13:57:39 MST 2007
BIOS-provided physical RAM map:
 Xen: 0000000000000000 - 0000000010800000 (usable)
0MB HIGHMEM available.
264MB LOWMEM available.
On node 0 totalpages: 67584
  DMA zone: 67584 pages, LIFO batch:15
  DMA32 zone: 0 pages, LIFO batch:0
  Normal zone: 0 pages, LIFO batch:0
  HighMem zone: 0 pages, LIFO batch:0
found SMP MP-table at 000f5f90
DMI present.
ACPI: RSDP (v000 HP-CPC                                ) @ 0x000f7cf0
ACPI: RSDT (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fee3040
ACPI: FADT (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fee30c0
ACPI: MCFG (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fee77c0
ACPI: MADT (v001 HP-CPC AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fee76c0
ACPI: SSDT (v001 HP-CPC  Cpu0Ist 0x00003000 INTL 0x20040311) @ 0x7fee7840
ACPI: SSDT (v001 HP-CPC    CpuPm 0x00003000 INTL 0x20040311) @ 0x7fee7cd0
ACPI: DSDT (v001 HP-CPC AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000)
Built 1 zonelists
Kernel command line: udev dolvm2 root=/dev/ram0 lvm2root=/dev/mapper/main-gentoo_x86_root
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0576000 soft=c056e000
PID hash table entries: 2048 (order: 11, 32768 bytes)
Xen reported: 2133.454 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Software IO TLB enabled:
 Aperture:     2 megabytes
 Kernel range: 0x00000000c0afe000 - 0x00000000c0cfe000
 Address size: 30 bits
vmalloc area: d1000000-fb7fe000, maxmem 33ffe000
Memory: 246400k/270336k available (3264k kernel code, 15416k reserved, 1048k data, 200k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5335.87 BogoMIPS (lpj=10671741)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebd3f1 20100000 00000000 00000000 0000e3bd 00000000 00000001
CPU: After vendor identify, caps: bfebd3f1 20100000 00000000 00000000 0000e3bd 00000000 00000001
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: bfebd3f1 20100000 00000000 00000140 0000e3bd 00000000 00000001
Checking 'hlt' instruction... OK.
CPU 1 irqstacks, hard=c0577000 soft=c056f000
ENABLING IO-APIC IRQs
Brought up 2 CPUs
Initializing CPU#1
migration_cost=10
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
Freeing initrd memory: 4980k freed
Grant table initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 *7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
xen_mem: Initialising balloon driver.
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
pnp: 00:09: ioport range 0x400-0x4bf could not be reserved
PCI: Bridge: 0000:00:01.0
  IO window: disabled.
  MEM window: fa000000-fcffffff
  PREFETCH window: e0000000-efffffff
PCI: Bridge: 0000:00:1c.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
  IO window: d000-dfff
  MEM window: fdb00000-fddfffff
  PREFETCH window: fde00000-fdefffff
ACPI: PCI Interrupt 0000:00: 01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00: 1c.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
audit: initializing netlink socket (disabled)
audit(1188261457.032:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
JFS: nTxBlock = 2048, nTxLock = 16384
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered (default)
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:01.0:pcie00]
Allocate Port Service[0000:00:01.0:pcie03]
ACPI: PCI Interrupt 0000:00: 1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00: 1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
ACPI: PCI Interrupt 0000:03: 04.0[A] -> GSI 16 (level, low) -> IRQ 16
e100: eth0: e100_probe: addr 0xfdeff000, irq 16, MAC addr 00:60:B0:1A:46:42
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky < maxk@xxxxxxxxxxxx>
Xen virtual console successfully installed as ttyS0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
libata version 1.20 loaded.
ahci 0000:00:1f.2: version 1.2
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00: 1f.2 to 64
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part
ata1: SATA max UDMA/133 cmd 0xD100E100 ctl 0x0 bmdma 0x0 irq 17
ata2: SATA max UDMA/133 cmd 0xD100E180 ctl 0x0 bmdma 0x0 irq 17
ata3: SATA max UDMA/133 cmd 0xD100E200 ctl 0x0 bmdma 0x0 irq 17
ata4: SATA max UDMA/133 cmd 0xD100E280 ctl 0x0 bmdma 0x0 irq 17
ata5: SATA max UDMA/133 cmd 0xD100E300 ctl 0x0 bmdma 0x0 irq 17
ata6: SATA max UDMA/133 cmd 0xD100E380 ctl 0x0 bmdma 0x0 irq 17
ata1: SATA link up 3.0 Gbps (SStatus 123)
ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4123 85:7469 86:bc01 87:4123 88:40ff
ata1: dev 0 ATA-8, max UDMA7, 976773168 sectors: LBA48
ata1: dev 0 configured for UDMA/133
scsi0 : ahci
ata2: SATA link up 3.0 Gbps (SStatus 123)
ata2: dev 0 cfg 49:2f00 82:7469 83:7f61 84:4163 85:7469 86:3c41 87:4163 88:407f
ata2: dev 0 ATA-7, max UDMA/133, 976773168 sectors: LBA48
ata2: dev 0 configured for UDMA/133
scsi1 : ahci
ata3: SATA link up 1.5 Gbps (SStatus 113)
ata3: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0007
ata3: dev 0 ATAPI, max UDMA/33
ata3: dev 0 configured for UDMA/33
scsi2 : ahci
ata4: SATA link down (SStatus 0)
scsi3 : ahci
ata5: SATA link up 1.5 Gbps (SStatus 113)
ata5: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4673 85:7c69 86:3e21 87:4663 88:007f
ata5: dev 0 ATA-7, max UDMA/133, 586114704 sectors: LBA48
ata5: dev 0 configured for UDMA/133
scsi4 : ahci
ata6: SATA link down (SStatus 0)
scsi5 : ahci
  Vendor: ATA       Model: SAMSUNG HD501LJ   Rev: CR10
  Type:   Direct-Access                      ANSI SCSI revision: 05
  Vendor: ATA       Model: WDC WD5000YS-01M  Rev: 07.0
  Type:   Direct-Access                      ANSI SCSI revision: 05
  Vendor: HL-DT-ST  Model: DVDRRW GSA-H30L   Rev: S544
  Type:   CD-ROM                             ANSI SCSI revision: 05
  Vendor: ATA       Model: Maxtor 6L300S0    Rev: BACE
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
 sda: sda1 sda2
sd 0:0:0:0: Attached scsi disk sda
SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
 sdb: sdb1 sdb2
sd 1:0:0:0: Attached scsi disk sdb
SCSI device sdc: 586114704 512-byte hdwr sectors (300091 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: drive cache: write back
SCSI device sdc: 586114704 512-byte hdwr sectors (300091 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: drive cache: write back
 sdc: sdc1 sdc2 sdc3 sdc4
sd 4:0:0:0: Attached scsi disk sdc
ata3: translated ATA stat/err 0x51/60 to SCSI SK/ASC/ASCQ 0x3/11/04
ata3: no sense translation for error 0x20
ata3: no sense translation for status: 0x51
ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04
ata3: no sense translation for error 0x20
ata3: no sense translation for status: 0x51
ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04
ata3: no sense translation for error 0x20
ata3: no sense translation for status: 0x51
ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04
ata3: no sense translation for error 0x20
ata3: no sense translation for status: 0x51
ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04
ata3: no sense translation for error 0x20
ata3: no sense translation for status: 0x51
ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04
ata3: no sense translation for error 0x20
ata3: no sense translation for status: 0x51
ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04
ata3: no sense translation for error 0x20
ata3: no sense translation for status: 0x51
ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04
ata3: no sense translation for error 0x20
ata3: no sense translation for status: 0x51
ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04
ata3: no sense translation for error 0x20
ata3: no sense translation for status: 0x51
ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04
ata3: no sense translation for error 0x20
ata3: no sense translation for status: 0x51
ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04
ata3: no sense translation for error 0x20
ata3: no sense translation for status: 0x51
ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04
ata3: no sense translation for error 0x20
ata3: no sense translation for status: 0x51
ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04
ata3: no sense translation for error 0x20
ata3: no sense translation for status: 0x51
ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04
ata3: no sense translation for error 0x20
ata3: no sense translation for status: 0x51
ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04
ata3: no sense translation for error 0x20
ata3: no sense translation for status: 0x51
ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04
ata3: no sense translation for error 0x20
ata3: no sense translation for status: 0x51
ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04
ata3: no sense translation for error 0x20
ata3: no sense translation for status: 0x51
ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04
ata3: no sense translation for error 0x20
ata3: no sense translation for status: 0x51
ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04
ata3: no sense translation for error 0x20
ata3: no sense translation for status: 0x51
ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sr 2:0:0:0: Attached scsi generic sg2 type 5
sd 4:0:0:0: Attached scsi generic sg3 type 0
ieee1394: Initialized config rom entry `ip1394'
ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 20 (level, low) -> IRQ 18
ohci1394: fw-host0: Unexpected PCI resource length of 1000!
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[18]  MMIO=[fddff000-fddff7ff]  Max Packet=[1024]  IR/IT contexts=[8/8]
ACPI: PCI Interrupt 0000:00:1a.7[A] -> GSI 23 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00: 1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00: 1a.7 : irq 19, io mem 0xfdffe000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00: 1d.7[A] -> GSI 23 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: cache line size of 32 is not supported by device 0000:00: 1d.7
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfdffd000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00: 1a.0[A] -> GSI 23 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 19, io base 0x0000fe00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 19 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000fd00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00: 1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000fc00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00: 1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000fb00
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 2-2: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00: 1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000fa00
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 2-2: configuration #1 chosen from 1 choice
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 4 ports detected
Initializing USB Mass Storage driver...
usb 4-1: new full speed USB device using uhci_hcd and address 2
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d80000c34717]
usb 4-1: configuration #1 chosen from 1 choice
usb 7-1: new full speed USB device using uhci_hcd and address 2
usb 7-1: configuration #1 chosen from 1 choice
hub 7-1:1.0: USB hub found
hub 7-1:1.0: 4 ports detected
usb 2-2.1: new low speed USB device using ehci_hcd and address 4
usb 2-2.1: configuration #1 chosen from 1 choice
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usb 7-1.1: new low speed USB device using uhci_hcd and address 3
usb 7-1.1: configuration #1 chosen from 1 choice
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hiddev
hiddev96: USB HID v1.10 Device [American Power Conversion Back-UPS XS 1500 LCD FW: 837.H4 .D USB FW:H4 ] on usb-0000:00:1d.7-2.1
input: ATEN ATEN-COMPOSITE as /class/input/input0
input: USB HID v1.10 Keyboard [ATEN ATEN-COMPOSITE] on usb-0000:00:1d.2-1.1
input: ATEN ATEN-COMPOSITE as /class/input/input1
input: USB HID v1.10 Mouse [ATEN ATEN-COMPOSITE] on usb-0000:00:1d.2-1.1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@xxxxxxxxxx
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard as /class/input/input2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
IPv4 over IPv4 tunneling driver
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 4980KiB [1 disk] into ram disk... done.
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 200k freed
logips2pp: Detected unknown logitech mouse model 0
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
input: PS/2 Logitech Mouse as /class/input/input3
ata3: no sense translation for error 0x20
ata3: no sense translation for status: 0x51
ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04
ata3: no sense translation for error 0x20
ata3: no sense translation for status: 0x51
ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04
ata3: no sense translation for error 0x20
ata3: no sense translation for status: 0x51
ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04
ata3: no sense translation for error 0x20
ata3: no sense translation for status: 0x51
ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04
ata3: no sense translation for error 0x20
ata3: no sense translation for status: 0x51
ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04
ata3: no sense translation for error 0x20
ata3: no sense translation for status: 0x51
ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04
ata3: no sense translation for error 0x20
ata3: no sense translation for status: 0x51
ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04
ata3: no sense translation for error 0x20
ata3: no sense translation for status: 0x51
ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04
ata3: no sense translation for error 0x20
ata3: no sense translation for status: 0x51
ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04
ata3: no sense translation for error 0x20
ata3: no sense translation for status: 0x51
ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04
ata3: no sense translation for error 0x20
ata3: no sense translation for status: 0x51
ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04
ata3: no sense translation for error 0x20
ata3: no sense translation for status: 0x51
ata3: translated ATA stat/err 0x51/20 to SCSI SK/ASC/ASCQ 0x3/11/04
eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
  Vendor: Generic   Model: USB SD Reader     Rev: 1.00
  Type:   Direct-Access                      ANSI SCSI revision: 00
sd 6:0:0:0: Attached scsi removable disk sdd
sd 6:0:0:0: Attached scsi generic sg4 type 0
  Vendor: Generic   Model: USB CF Reader     Rev: 1.01
  Type:   Direct-Access                      ANSI SCSI revision: 00
sd 6:0:0:1: Attached scsi removable disk sde
sd 6:0:0:1: Attached scsi generic sg5 type 0
  Vendor: Generic   Model: USB SM Reader     Rev: 1.02
  Type:   Direct-Access                      ANSI SCSI revision: 00
sd 6:0:0:2: Attached scsi removable disk sdf
sd 6:0:0:2: Attached scsi generic sg6 type 0
  Vendor: Generic   Model: USB MS Reader     Rev: 1.03
  Type:   Direct-Access                      ANSI SCSI revision: 00
sd 6:0:0:3: Attached scsi removable disk sdg
sd 6:0:0:3: Attached scsi generic sg7 type 0
usb-storage: device scan complete
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00: 1b.0 to 64
hw_random hardware driver 1.0.0 loaded
hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
EXT3 FS on dm-9, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2097144k swap on /dev/mapper/main-swap.  Priority:-1 extents:1 across:2097144k
Real Time Clock Driver v1.12ac
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
device vif0.0 entered promiscuous mode
xenbr0: port 1(vif0.0) entering learning state
xenbr0: topology change detected, propagating
xenbr0: port 1(vif0.0) entering forwarding state
e100: peth0: e100_watchdog: link up, 100Mbps, full-duplex
device peth0 entered promiscuous mode
xenbr0: port 2(peth0) entering learning state
xenbr0: topology change detected, propagating
xenbr0: port 2(peth0) entering forwarding state
device tap0 entered promiscuous mode
device vif1.0 entered promiscuous mode
xenbr0: port 3(tap0) entering learning state
xenbr0: topology change detected, propagating
xenbr0: port 3(tap0) entering forwarding state
xenbr0: port 4(vif1.0) entering disabled state
device vif1.0 left promiscuous mode
xenbr0: port 4(vif1.0) entering disabled state
xenbr0: port 3(tap0) entering disabled state
device tap0 left promiscuous mode
xenbr0: port 3(tap0) entering disabled state




_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
<Prev in Thread] Current Thread [Next in Thread>
  • [Xen-users] Solved: Correction: Hotplug scripts not working (error starting DomU), Derek <=