| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
Re: [Xen-users] VLANs and Networking between DomU and Dom0
Could it be that I have to attach another virtual interface (vif) to
the 'xenbr1V2' bridge in Dom0? That what's usually configured in den DomU
Script but for Dom0? Is theis doable?
Reinhard
On Tuesday 17 July 2007 12:33:33 Reinhard Brandstädter wrote:
> Hello,
>
> I've configured multiple bridges on my Dom0 for VLAN tagged and untagged
> traffic. On the Dom0 I have two physical interfaces and one VLAN interface:
> eth0 (untagged)
> eth1 (untagged) (network config 192.168.3.10/24)
> eth1.1002 (VLAN 1002) (network config 192.168.3.104/24)
>
> Xen creates three bridges in the networking script:
> dir=$(dirname "$0")
> "$dir/network-bridge" "$@" vifnum=0 netdev=eth0 bridge=xenbr0
> "$dir/network-bridge" "$@" vifnum=1 netdev=eth1 bridge=xenbr1
> "$dir/network-bridge" "$@" vifnum=2 netdev=eth1.1002 bridge=xenbr1V2
>
> resulting in the bridges:
> xenbr0
> xenbr1
> xenbr1V2
>
> Now I can create two virtual machines that use the 'xenbr1V2' as network
> device (network config 192.168.3.0/24, assigned IP .101 and .103) and those
> machines can see (and communicate/ping) with eachother.
> Another virtual machine uses 'xenbr1' as network device (network config
> 192.168.3.0/24, assigned IP .102).
> As expected it is not possible to ping between the machines on the VLAN
> bridge and the one on the untagged bridge.
>
> However I can't ping the Dom0 from the VLAN tagged machines but I can from
> the untagged machines (and vice versa).
> I assumed that this might have something to do with routing (since i use
> the same network/mask on both nets (tagged and untagged).
> So I checked with the routing table.
>
> with this table i can ping the untagged VM:
> Kernel IP routing table
> Destination Gateway Genmask Flags Metric Ref Use Iface
> xxx.xx.x.x 0.0.0.0 255.255.255.0 U 0 0 0 eth0
> 192.168.3.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
> 0.0.0.0 xxx.xx.x.x 0.0.0.0 UG 0 0 0 eth0
>
> With this table I expected to be able to ping the tagged VM but couldn't:
> Kernel IP routing table
> Destination Gateway Genmask Flags Metric Ref Use Iface
> xxx.xx.x.x 0.0.0.0 255.255.255.0 U 0 0 0 eth0
> 192.168.3.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1.1002
> 0.0.0.0 xxx.xx.x.x 0.0.0.0 UG 0 0 0 eth0
>
> This might not even be a Xen specific issue but maybe anyone here has/had a
> similar configuration and might point me in the right direction.
>
> Thanks,
> Reinhard
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
--
Dipl.-Ing. Reinhard Brandstaedter
ZID - Zentraler Informatik Dienst
Johannes-Kepler-Universitaet Linz
Altenbergerstrasse 69
A-4040 linz
phone: +43 732 2468 1368
email: reinhard.brandstaedter@xxxxxx
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home