Hi xen-users,
I install xen, on gentoo linux. Install was ok, but i have an
issue that i can't solve. When booting in xen-linux, whereis no eth0
interface. When i boot non-xen kernel all is ok, eth0 is present.
I use 2.6.18-xen kernel version.
lspci show me:
00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller Hub (rev
02)
00:01.0 PCI bridge: Intel Corporation 82P965/G965 PCI Express Root Port (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Contoller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #2 (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1
(rev 02)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface
Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801H (ICH8 Family) 4 port SATA IDE
Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801H (ICH8 Family) 2 port SATA IDE
Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 7100 GS (rev a1)
03:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC
Gigabit Ethernet (rev 10)
I think this is an irq stuff, because in /proc/interrupts is no device
eth0:
cat /proc/interrupts
CPU0 CPU1
1: 8 0 Phys-irq i8042
6: 2 0 Phys-irq floppy
8: 0 0 Phys-irq rtc
9: 0 0 Phys-irq acpi
16: 0 0 Phys-irq uhci_hcd:usb3
17: 4351 0 Phys-irq libata, libata, uhci_hcd:usb6
18: 1 0 Phys-irq ehci_hcd:usb1, uhci_hcd:usb7
19: 1 0 Phys-irq ehci_hcd:usb2, uhci_hcd:usb5
20: 0 0 Phys-irq uhci_hcd:usb4
256: 613405 0 Dynamic-irq timer0
257: 1660 0 Dynamic-irq resched0
258: 38 0 Dynamic-irq callfunc0
259: 0 1905 Dynamic-irq resched1
260: 0 50 Dynamic-irq callfunc1
261: 0 12785 Dynamic-irq timer1
262: 83 0 Dynamic-irq xenbus
263: 54 0 Dynamic-irq console
NMI: 0 0
LOC: 0 0
ERR: 0
MIS: 0
/proc/interrupts then i boot non-xen kernel looks like this:
cat /proc/interrupts
CPU0 CPU1
0: 13840 0 IO-APIC-edge timer
1: 8 0 IO-APIC-edge i8042
4: 410 0 IO-APIC-edge serial
6: 2 0 IO-APIC-edge floppy
8: 0 0 IO-APIC-edge rtc
9: 0 0 IO-APIC-fasteoi acpi
12: 4 0 IO-APIC-edge i8042
16: 0 0 IO-APIC-fasteoi uhci_hcd:usb3
18: 1 0 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb7
19: 2614 0 IO-APIC-fasteoi libata, libata, uhci_hcd:usb6
21: 34 0 IO-APIC-fasteoi uhci_hcd:usb4, eth0
23: 1 0 IO-APIC-fasteoi ehci_hcd:usb2, uhci_hcd:usb5
NMI: 72 42
LOC: 13779 13783
ERR: 0
I attached my dmesg, maybe it can help solving the problem.
I google so much, but no result :(
Please, help to solve this issue.
Thanks in advance.
--
email: alexandru.balaban@xxxxxx
tel. oficiu: +373 22 820907
tel. mobil: +373 69982582
dmesg
Description: Binary data
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home