[Xen-users] VM got stuck from the newly created SLC4 image

["Omer Khalid" <Omer.Khalid@xxxxxxx>]

Hi,

I am having trouble with my newly created SLC4 VM. It boots up but gets stuck while starting Starting HAL daemon: [  OK  ].

Any help would be much appreciated! By the way, its being booted with Pygrub.

Cheers
Omer

--- console output ---
Linux version 2.6.9-55.0.2.EL.cernxenU (root@lxcert-i386) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-8)) #1 SMP Wed Jun 27 13:57:15 CEST 2007
BIOS-provided physical RAM map:
 Xen: 0000000000000000 - 0000000010000000 (usable)
0MB HIGHMEM available.
264MB LOWMEM available.
Using x86 segment limits to approximate NX protection
IRQ lockup detection disabled
Built 1 zonelists
Kernel command line:  ip=

128.142.200.239:1.2.3.4:128.142.1.1:255.255.0.0:ctb-generic-17.cern.ch:eth0:off root=/dev/sda1 ro None
Initializing CPU#0
CPU 0 irqstacks, hard=c0339000 soft=c0319000
PID hash table entries: 2048 (order: 11, 32768 bytes)
Xen reported: 2790.702 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
vmalloc area: d1000000-f4ffe000, maxmem 2d800000
Memory: 253396k/270336k available (1451k kernel code, 8720k reserved, 542k data, 124k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Security Scaffold v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security:  Registering secondary module capability

Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
Enabling fast FPU save and restore... done.

Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Brought up 1 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 1518k freed
Grant table initialized
NET: Registered protocol family 16
Brought up 1 VCPUs
xen_mem: Initialising balloon driver.
audit: initializing netlink socket (disabled)
audit(1183478688.522:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 2E127DB53460107E
- User ID: Red Hat, Inc. (Kernel Module GPG key)
rtc: IRQ 8 is not free.
i8042.c: No controller found.
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Xen virtual console successfully installed as xvc0
Linux version 2.6.9-55.0.2.EL.cernxenU (root@lxcert-i386) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-8)) #1 SMP Wed Jun 27 13:57:15 CEST 2007
BIOS-provided physical RAM map:
 Xen: 0000000000000000 - 0000000010000000 (usable)
0MB HIGHMEM available.
264MB LOWMEM available.
Using x86 segment limits to approximate NX protection
IRQ lockup detection disabled
Built 1 zonelists
Kernel command line:  ip=

128.142.200.239:1.2.3.4:128.142.1.1:255.255.0.0:ctb-generic-17.cern.ch:eth0:off root=/dev/sda1 ro None
Initializing CPU#0
CPU 0 irqstacks, hard=c0339000 soft=c0319000
PID hash table entries: 2048 (order: 11, 32768 bytes)
Xen reported: 2790.702 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
vmalloc area: d1000000-f4ffe000, maxmem 2d800000
Memory: 253396k/270336k available (1451k kernel code, 8720k reserved, 542k data, 124k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Security Scaffold v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security:  Registering secondary module capability

Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
Enabling fast FPU save and restore... done.

Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Brought up 1 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 1518k freed
Grant table initialized
NET: Registered protocol family 16
Brought up 1 VCPUs
xen_mem: Initialising balloon driver.
audit: initializing netlink socket (disabled)
audit(1183478688.522:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 2E127DB53460107E
- User ID: Red Hat, Inc. (Kernel Module GPG key)
rtc: IRQ 8 is not free.
i8042.c: No controller found.
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Xen virtual console successfully installed as xvc0
Event-channel device installed.
mice: PS/2 mouse device common for all mice
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 6, 262144 bytes)
TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
XENBUS: Device with no driver: device/vbd/2049
XENBUS: Device with no driver: device/vbd/2050
XENBUS: Device with no driver: device/vif/0
Freeing unused kernel memory: 124k freed
Red Hat nash version  starting
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
mknod: failed to create /dev/ram0: File exists
mknod: failed to create /dev/ram1: File exists
Setting up hotplug.
Creating block device nodes.
Loading jbd.ko module
Loading ext3.ko module
Loading dm-mod.ko module
device-mapper: 4.5.5-ioctl (2006-12-01) initialised: 
dm-devel@xxxxxxxxxx
Loading dm-mirror.ko module
Loading dm-zero.ko module
Loading dm-snapshot.ko module
Loading xenblk.ko module
Registering block device major 8
Using cfq io scheduler
Loading xennet.ko module
netfront: Initialising virtual ethernet driver.
netfront: device eth0 has flipping receive path.
Creating root device.
Mounting root filesystem.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Setting up other filesystems.
Setting up new root fs
no fstab.sys, mounting internal defaults
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /sys
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
INIT: version 2.85 booting
Setting default font (latarcyrheb-sun16): [  OK  ]

                Welcome to Scientific Linux CERN SLC
                Press 'I' to enter interactive startup.
Starting udev:  [  OK  ]
Initializing hardware...  storage network audio done[  OK  ]
Configuring kernel parameters:  [  OK  ]
Setting clock  (utc): Tue Jul  3 18:04:56 CEST 2007 [  OK  ]
Setting hostname localhost:  [  OK  ]
Checking root filesystem
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda1
/dev/sda1: clean, 20215/655360 files, 187084/1310720 blocks
[  OK  ]
Remounting root filesystem in read-write mode:  [  OK  ]
no block devices found
Setting up Logical Volume Management: [  OK  ]
Checking filesystems
Checking all file systems.
[  OK  ]
Mounting local filesystems:  [  OK  ]
Enabling swap space:  [  OK  ]

INIT: Entering runlevel: 3
Entering non-interactive startup
  No volume groups found
Starting knconfig:  [  OK  ]
Setting network parameters:  [  OK  ]
Bringing up loopback interface:  [  OK  ]
Bringing up interface eth0:  [  OK  ]
Starting system logger: [  OK  ]
Starting kernel logger: [  OK  ]
Mounting other filesystems:  [  OK  ]
Starting system message bus: [  OK  ]
Starting HAL daemon: [  OK  ]




-- 
----------------------------------------------------------   
CERN – European Organization for Nuclear
Research, IT Department,  CH-1211
Geneva 23, Switzerland

Phone: +41 (0) 22 767 2224
Fax:     +41 (0) 22 766 8683
E-mail : Omer.Khalid@xxxxxxx
Homepage: http://cern.ch/Omer.Khalid
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users