Hi folks,
I read quite some posts about "Destination host unreachable" problems
before, but none could help me to solve my issue. So here we go:
This is what I am using:
SUSE Linux Enterprise Desktop 10 SP1 - Current with all updates
Network configuration of my dom0:
foobar:~ # ip a
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:18:de:be:ea:03 brd ff:ff:ff:ff:ff:ff
3: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:17:08:45:14:f7 brd ff:ff:ff:ff:ff:ff
inet 192.168.130.170/24 brd 255.255.255.255 scope global eth0
inet6 fe80::217:8ff:fe45:14f7/64 scope link
valid_lft forever preferred_lft forever
4: sit0: <NOARP> mtu 1480 qdisc noop
link/sit 0.0.0.0 brd 0.0.0.0
5: vif0.0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop
link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff
6: veth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
inet 192.168.130.170/24 brd 255.255.255.255 scope global veth0
7: vif0.1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop
link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff
8: veth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
9: vif0.2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop
link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff
10: veth2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
11: vif0.3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop
link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff
12: veth3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
13: xenbr0: <BROADCAST,NOARP,UP> mtu 1500 qdisc noqueue
link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff
inet6 fe80::200:ff:fe00:0/64 scope link
valid_lft forever preferred_lft forever
14: vif1.0: <BROADCAST,NOARP,UP> mtu 1500 qdisc pfifo_fast qlen 32
link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff
inet6 fe80::fcff:ffff:feff:ffff/64 scope link
valid_lft forever preferred_lft forever
15: vif2.0: <BROADCAST,NOARP,UP> mtu 1500 qdisc pfifo_fast qlen 32
link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff
inet6 fe80::fcff:ffff:feff:ffff/64 scope link
valid_lft forever preferred_lft forever
foobar:~ #
foobar:~ # brctl show
bridge name bridge id STP enabled interfaces
xenbr0 8000.feffffffffff no vif1.0
vif2.0
foobar:~ #
Options set in xend-config.sxp:
foobar:~ # cat /etc/xen/xend-config.sxp | grep "^[^#]"
(xen-api-server ((unix none)))
(xend-unix-server yes)
(xend-relocation-hosts-allow '^localhost$ ^localhost\\.localdomain$')
(network-script network-bridge)
(vif-script vif-bridge)
(dom0-min-mem 512)
(dom0-cpus 1)
(vncpasswd '')
foobar:~ #
No changes to network-bridge or vif-bridge yet.
dom1:
sles10nagios:~ # ip a
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:16:3e:34:fd:a6 brd ff:ff:ff:ff:ff:ff
inet 192.168.130.171/24 brd 192.168.130.255 scope global eth0
inet6 fe80::216:3eff:fe34:fda6/64 scope link
valid_lft forever preferred_lft forever
3: sit0: <NOARP> mtu 1480 qdisc noop
link/sit 0.0.0.0 brd 0.0.0.0
dom2:
sles10mini:~ # ip a
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:16:3e:34:72:85 brd ff:ff:ff:ff:ff:ff
inet 192.168.130.172/24 brd 192.168.130.255 scope global eth0
inet6 fe80::216:3eff:fe34:7285/64 scope link
valid_lft forever preferred_lft forever
3: sit0: <NOARP> mtu 1480 qdisc noop
link/sit 0.0.0.0 brd 0.0.0.0
sles10mini:~ #
Ping dom1 from localhost:
foobar:~ # ping 192.168.130.171
PING 192.168.130.171 (192.168.130.171) 56(84) bytes of data.
From 192.168.130.170: icmp_seq=1 Destination Host Unreachable
From 192.168.130.170 icmp_seq=1 Destination Host Unreachable
From 192.168.130.170 icmp_seq=2 Destination Host Unreachable
From 192.168.130.170 icmp_seq=3 Destination Host Unreachable
--- 192.168.130.171 ping statistics ---
5 packets transmitted, 0 received, +4 errors, 100% packet loss, time 4018ms
, pipe 3
foobar:~ #
Ping dom2 from localhost:
foobar:~ # ping 192.168.130.172
PING 192.168.130.172 (192.168.130.172) 56(84) bytes of data.
From 192.168.130.170: icmp_seq=1 Destination Host Unreachable
From 192.168.130.170 icmp_seq=1 Destination Host Unreachable
From 192.168.130.170 icmp_seq=2 Destination Host Unreachable
From 192.168.130.170 icmp_seq=3 Destination Host Unreachable
--- 192.168.130.172 ping statistics ---
4 packets transmitted, 0 received, +4 errors, 100% packet loss, time 3008ms
, pipe 3
foobar:~ #
Ping xend host from dom1:
sles10nagios:~ # ping 192.168.130.170
PING 192.168.130.170 (192.168.130.170) 56(84) bytes of data.
From 192.168.130.171: icmp_seq=1 Destination Host Unreachable
From 192.168.130.171 icmp_seq=1 Destination Host Unreachable
From 192.168.130.171 icmp_seq=2 Destination Host Unreachable
From 192.168.130.171 icmp_seq=3 Destination Host Unreachable
--- 192.168.130.170 ping statistics ---
5 packets transmitted, 0 received, +4 errors, 100% packet loss, time 4014ms
, pipe 3
sles10nagios:~ #
Ping dom2 from dom1:
sles10nagios:~ # ping 192.168.130.172
PING 192.168.130.172 (192.168.130.172) 56(84) bytes of data.
64 bytes from 192.168.130.172: icmp_seq=1 ttl=64 time=0.257 ms
64 bytes from 192.168.130.172: icmp_seq=2 ttl=64 time=0.142 ms
64 bytes from 192.168.130.172: icmp_seq=3 ttl=64 time=0.139 ms
64 bytes from 192.168.130.172: icmp_seq=4 ttl=64 time=0.141 ms
--- 192.168.130.172 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 2999ms
rtt min/avg/max/mdev = 0.139/0.169/0.257/0.052 ms
sles10nagios:~ #
Ping xend host from dom2:
sles10mini:~ # ping 192.168.130.170
PING 192.168.130.170 (192.168.130.170) 56(84) bytes of data.
From 192.168.130.172: icmp_seq=1 Destination Host Unreachable
From 192.168.130.172 icmp_seq=1 Destination Host Unreachable
From 192.168.130.172 icmp_seq=2 Destination Host Unreachable
From 192.168.130.172 icmp_seq=3 Destination Host Unreachable
--- 192.168.130.170 ping statistics ---
5 packets transmitted, 0 received, +4 errors, 100% packet loss, time 4013ms
, pipe 3
sles10mini:~ #
Ping dom1 from dom2:
sles10mini:~ # ping 192.168.130.171
PING 192.168.130.171 (192.168.130.171) 56(84) bytes of data.
64 bytes from 192.168.130.171: icmp_seq=1 ttl=64 time=0.161 ms
64 bytes from 192.168.130.171: icmp_seq=2 ttl=64 time=0.137 ms
64 bytes from 192.168.130.171: icmp_seq=3 ttl=64 time=0.139 ms
64 bytes from 192.168.130.171: icmp_seq=4 ttl=64 time=0.144 ms
--- 192.168.130.171 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 2998ms
rtt min/avg/max/mdev = 0.137/0.145/0.161/0.012 ms
sles10mini:~ #
iptables settings look like
foobar:~ # iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
ACCEPT all -- anywhere anywhere PHYSDEV match
--physdev-in vif1.0
ACCEPT all -- anywhere anywhere PHYSDEV match
--physdev-in vif2.0
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
foobar:~ #
depending on of the domU's are started or not.
What I found strange, is that a peth isn't displayed at all in my ip a
output. Is this the result of renaming the eth devices while setting up
vethX? I saw also in some posts that xenbr0 was assigned an ip address.
Tried that as well and also set a routing entry for it but my domU's don't
wanna talk to the outsite.
Has anyone an idea what could cause this problem?
Regards,
Sascha
This email was Anti Virus checked by Astaro Security Gateway.
http://www.astaro.com
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home