I have CenotOS 5 installed on 2x Intel(R) Xeon(R) CPU 5110 @ 1.60GHz
with 2G ram. Xen in installed on software raid in RAID-1 . Root is at
/dev/md1 with 20G partition, other is on /dev/md2 with the rest mounted
at /xenvm . Here is the xen config for the dom0.
kernel = "/boot/vmlinuz-2.6.18-8.1.3.el5xen"
ramdisk = "/boot/initrd-2.6.18-8.1.3.el5xen.img"
memory = "256"
name = "centos1"
vif = ['bridge=xenbr0', ]
disk =
['file:/xenvm/centos.5-0.img,sda1,w','file:/xenvm/centos.swap,sda2,w']
root = "/dev/sda1 ro"
Image that i use is from jailtime.org .When i try to boot with xm
create centos1 -c i got that error
Linux version 2.6.18-8.1.3.el5xen (mockbuild@xxxxxxxxxxxxxxxxxxx) (gcc
version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Mon Apr 30 20:58:43
EDT 2007
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000010800000 (usable)
0MB HIGHMEM available.
264MB LOWMEM available.
NX (Execute Disable) protection: active
ACPI in unprivileged domain disabled
Built 1 zonelists. Total pages: 67584
Kernel command line: root=/dev/sda1 rw
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c071b000 soft=c06fb000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Xen reported: 1600.054 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Software IO TLB disabled
vmalloc area: d1000000-f4ffe000, maxmem 2d7fe000
Memory: 251264k/270336k available (2017k kernel code, 10644k reserved,
824k data, 172k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4002.66 BogoMIPS
(lpj=8005329)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
Brought up 1 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 3496k freed
Grant table initialized
NET: Registered protocol family 16
ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread C06CAAA0 could
not acquire Mutex [2] [20060707]
Brought up 1 CPUs
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
IA-32 Microcode Update Driver: v1.14-xen <tigran@xxxxxxxxxxx>
audit: initializing netlink socket (disabled)
audit(1178782375.483:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key A2554D49C6A32ED2
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Linux version 2.6.18-8.1.3.el5xen (mockbuild@xxxxxxxxxxxxxxxxxxx) (gcc
version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Mon Apr 30 20:58:43
EDT 2007
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000010800000 (usable)
0MB HIGHMEM available.
264MB LOWMEM available.
NX (Execute Disable) protection: active
ACPI in unprivileged domain disabled
Built 1 zonelists. Total pages: 67584
Kernel command line: root=/dev/sda1 rw
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c071b000 soft=c06fb000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Xen reported: 1600.054 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Software IO TLB disabled
vmalloc area: d1000000-f4ffe000, maxmem 2d7fe000
Memory: 251264k/270336k available (2017k kernel code, 10644k reserved,
824k data, 172k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4002.66 BogoMIPS
(lpj=8005329)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
Brought up 1 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 3496k freed
Grant table initialized
NET: Registered protocol family 16
ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread C06CAAA0 could
not acquire Mutex [2] [20060707]
Brought up 1 CPUs
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
IA-32 Microcode Update Driver: v1.14-xen <tigran@xxxxxxxxxxx>
audit: initializing netlink socket (disabled)
audit(1178782375.483:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key A2554D49C6A32ED2
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
XENBUS: Device with no driver: device/vbd/2049
XENBUS: Device with no driver: device/vbd/2050
XENBUS: Device with no driver: device/vif/0
Freeing unused kernel memory: 172k freed
Write protecting the kernel read-only data: 355k
Red Hat nash version 5.1.19.6 starting
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
Setting up hotplug.
Creating block device nodes.
Loading uhci-hcd.ko module
USB Universal Host Controller Interface driver v3.0
Loading ohci-hcd.ko module
Loading ehci-hcd.ko module
Loading jbd.ko module
Loading ext3.ko module
Loading raid1.ko module
md: raid1 personality registered for level 1
Loading scsi_mod.ko module
SCSI subsystem initialized
Loading sd_mod.ko module
Loading libata.ko module
Loading ata_piix.ko module
Loading usb-storage.ko module
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
Waiting for driver initialization.
stabilized: stat /proc/bus/usb/devices: No such file or directory
Waiting for driver initialization.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Creating root device.
Mounting root filesystem.
mount: could not find filesystem '/dev/root'
Setting up other filesystems.
Setting up new root fs
setuproot: moving /dev failed: No such file or directory
no fstab.sys, mounting internal defaults
setuproot: error mounting /proc: No such file or directory
setuproot: error mounting /sys: No such file or directory
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /sys
switchroot: mount failed: No such file or directory
Kernel panic - not syncing: Attempted to kill init!
any ideas ?
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home