Hi all,
I did get also the black screen using sdl.
I suspect not correctly loading of the xenkbd driver in domU.
Tested this with a centOS 4.4 DomU, running in a FC 6 Dom0 and centos4.4
Dom0.
It works in both the overall xen linux kernel, as the xen0 and xenU
kernels.
In short the solution is to compile both xenfb and xenkbd as module, put
them in the initrd to load at system startup.
The problem I still have when using the --preload=xenfb and
--preload=xenkbd, is that the xenkbd is not loaded. When i add the
xenkbd module manually in the deps list of xenfb, it works without
manual intervention.
When inserting the xenfb and xenkbd modules manually in the domU kernel,
a restart of the /usr/lib/xen/bin/sldfb --domid <number> --title <window
title> could be needed to get rid of the black screen.
I've include a more detailed description of my compilation steps for the
FC6 dom0 setup. Here I opted for the xen0 and xenU approach.
(note: this is specific for my setup, so please adapt)
I hope this solves the black screen issue.
In my setup I have a resolution of 800x600. I would like it higher, so
this is the next issue to solve.
Greetings
Johan
On Thu, 2007-01-04 at 14:28 +0000, Mark Williamson wrote:
> Assuming you guys are having problems with X in the domu...
>
> 3.0.3 doesn't have support for a graphical framebuffer. The most
> straightforward way to get graphical apps to run would be to connect to the
> domain from dom0 using ssh -X so that graphical apps are displayed within
> your dom0 desktop. This is just treating the domUs as if they were separate
> machines.
>
> 3.0.4 contains support for a graphical framebuffer so you can run X within
> the
> guest directly.
>
> I've written some instructions below for you guys, in case you want to try
> this. There might be mistakes, or omissions, so please please exercise
> caution! Feel free to ask on anything you're not sure about.
>
> You'd need to upgrade to 3.0.4, edit Config.mk to change XENFB_TOOLS to =y
> and
> do a make-install tools. This'll give you the dom0 components for accessing
> the framebuffer.
>
> The, compile a domU kernel with framebuffer support in (it's selectable in
> the
> kernel menuconfig). If you want to be able to run virtual terminals on the
> framebuffer, you'd also need to select the generic Linux options for the
> framebuffer console. I'd recommend you do this.
>
> Configure the domain to run a getty on /dev/ttyS0, add the following line
> to /etc/inittab, just after the lines starting the other gettys on your
> system:
> S0:2345:respawn:/sbin/mingetty ttyS0
>
> add ttyS0 to /etc/securetty or /etc/securettys (whichever you have). This is
> to enable root login on ttyS0.
>
> Once this is done, change your config file for the domain to include the
> following:
>
> add "xencons=ttyS0 console=ttyS0 video=xenfb"
>
> This redirects your console to go through ttyS0, where you're now running a
> getty.
>
> Now add the following to the domain's config file:
> vfb=['type=sdl']
> to get a local display of the domain's framebuffer
>
> *or*
>
> vfb=['type=vnc']
> to export the display over VNC. Change this to:
> vfb=['type=vnc,vnclisten=ipaddr']
> substituting the ip address of an interface, if you want the VNC server to
> listen to connections on some network (default is to listen on localhost).
>
> Now try booting the domain and see if it works :-) For VNC, the display will
> be exported on port 5900 + domain_id.
>
> If anything doesn't work and you want to get back into the guest in
> the "normal" way, just remove the "xencons=ttyS0 console=ttyS0 video=xenfb"
> and the vfb= line from its config file and you should be able to boot it
> normally. Otherwise, you could mount the guest's filesystem directly (after
> shutting it down!!!!!) and fix config there.
>
> Again, these instructions might include mistakes, or omissions, so please
> please exercise caution! Feel free to ask on anything you're not sure about.
>
> If you try it, please let us know how it works (or if it doesn't!)
>
> Hope that helps you some.
>
> Cheers,
> Mark
>
> On Thursday 04 January 2007 09:47, Andrew McGregor wrote:
> > Hi,
> >
> > Are you saying a DomU cannot load X or the Dom0?
> >
> > Andy
> >
> > Thomas Miller wrote:
> > > I am having the same problem on openSuse 10.2 . Hope someone can help
> > > us out ;-)
> > >
> > > chenbin wrote:
> > >> I installed xen-3.0.3 in Fedora Core 6, the guest OS can be boot up,
> > >> but it can not enter the KDE or GNOME though I set the run level to 5
> > >> in the configuration file.
> > >> The kernel is 2.6.16-xen0 in domain0 and 2.6.16-xenU in guest
> > >> domain. The disk of the guest OS is a img file which containes the
> > >> whole copy of the Fedora Core 6 installed in the host.
> > >>
> > >> Is there any way to solve this problem? It's not comfortable for me
> > >> without the GUI environment.
> > >> ------------------------------------------------------------------------
> > >>
> > >> _______________________________________________
> > >> Xen-users mailing list
> > >> Xen-users@xxxxxxxxxxxxxxxxxxx
> > >> http://lists.xensource.com/xen-users
> > >>
> > >> __________ NOD32 1924 (20061215) Information __________
> > >>
> > >> This message was checked by NOD32 antivirus system.
> > >> http://www.eset.com
> > >
> > > --
> > > Thomas Miller
> > > Chrome Portal Project Manager
> > > CPCUG Programmers SIG Chairperson (formally Delphi)
> > > Delphi Client/Server Certified Developer
> > > BSS Accounting & Distribution Software
> > > BSS Enterprise Accounting FrameWork
> > >
> > > http://www.bss-software.com
> > > http://programmers.cpcug.org/
> > > http://sourceforge.net/projects/chromeportal/
> > > http://sourceforge.net/projects/uopl/
> > > http://sourceforge.net/projects/dbexpressplus
> > > ------------------------------------------------------------------------
> > >
> > > _______________________________________________
> > > Xen-users mailing list
> > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > http://lists.xensource.com/xen-users
> >
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-users
>
PVM_sdl.txt
Description: Text document
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home