Re: [Xen-users] (network-script network-nat)

["Franck" <franck@xxxxxxxxxxxxxxxxx>]

> On 3/7/07, Franck <franck@xxxxxxxxxxxxxxxxx> wrote:
>> Hi,
>>
>> one little question
>>
>> In xend-config.sxp, i've this :
>> (network-script network-nat)
>> (vif-script vif-nat)
>>
>> In my domU config file, i've this
>> vif = [ 'ip=192.168.0.61' ]
>> ip="192.168.0.61"
>> netmask="255.255.255.0"
>> gateway="192.168.0.1"
>>
>> I'm starting domU and ALL work fine YAHOO.
>> BUT, because there's a BUT, in dom0, ifconfig like this :
>> vif1.0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
>>           inet addr:192.168.0.188  Bcast:0.0.0.0  Mask:255.255.255.255
>>           inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
>>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>>           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>>           TX packets:0 errors:0 dropped:4 overruns:0 carrier:0
>>           collisions:0 txqueuelen:0
>>           RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
>>
>> What's this IP 192.168.0.188 ???
>
> The IP you had configured for eth0 of the dom0 host.

No, dom0 has DHCP and is 192.168.0.10

>
>> Is it possible having 192.168.0.61 instead ???
>
> No. You can't have two systems with the same IP address.
OK, thanks

Franck

> jerry
>
> --
> "Oh joy! Rapture! I've got a brain"
> -Scarecrow
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>


-- 
http://www.linuxpourtous.com


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users