| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
[Xen-users] Re: Broadcom Corporation NetXtreme II BCM5708 bnx2 bridging
Sorry about that. We had to rename that machine. The new URL is:
<http://wiki.ncsa.uiuc.edu/wiki/Dell_PE1950_NIC_Firmware_Workaround>http://mywiki.ncsa.uiuc.edu/wiki/Dell_PE1950_NIC_Firmware_Workaround
Coincidentally, the outage for the weekly backups is happening right
now. The link should work again in a couple of hours.
- Mike
At 11/11/2006 11:55 AM Saturday, Chu, Sam wrote:
I am having the same problem. But, I cannot access to the following link
for solution
<http://wiki.ncsa.uiuc.edu/wiki/Dell_PE1950_NIC_Firmware_Workaround>http://wiki.ncsa.uiuc.edu/wiki/Dell_PE1950_NIC_Firmware_Workaround
Can someone send me the content of this link?
Thanks.
Pete,
This may be relevant:
<http://wiki.ncsa.uiuc.edu/wiki/Dell_PE1950_NIC_Firmware_Workaround>http://wiki.ncsa.uiuc.edu/wiki/Dell_PE1950_NIC_Firmware_Workaround
- Mike
At 8/18/2006 09:40 AM Friday, Peter McEvoy wrote:
Hi, I've run into the same issue as:
<http://lists.xensource.com/archives/html/xen-users/2006-07/msg00599.html>http://lists.xensource.com/archives/html/xen-users/2006-07/msg00599.html
In that, running the network bridge script kills networking completely,
trying to ping the gateway gives me destination host unreachable.
The card is:
09:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708
Gigabit Ethernet (rev 11)
Using the bnx2 module:
filename: /lib/modules/2.6.16-2-xen-686/kernel/drivers/net/bnx2.ko
version: 1.4.31 license: GPL description: Broadcom
NetXtreme II BCM5706/5708 Driver author: Michael Chan
<mchan@xxxxxxxxxxxx> srcversion: E70D1EF4482674DE649B19D
alias: pci:v000014E4d000016ACsv*sd*bc*sc*i*
alias: pci:v000014E4d000016AAsv*sd*bc*sc*i*
alias: pci:v000014E4d000016AAsv0000103Csd00003102bc*sc*i*
alias: pci:v000014E4d0000164Csv*sd*bc*sc*i*
alias: pci:v000014E4d0000164Asv*sd*bc*sc*i*
alias: pci:v000014E4d0000164Asv0000103Csd00003106bc*sc*i*
alias: pci:v000014E4d0000164Asv0000103Csd00003101bc*sc*i*
depends: vermagic: 2.6.16-2-xen-686 SMP 686 gcc-4.0
parm: disable_msi:Disable Message Signaled Interrupt (MSI) (int)
from the debian xen kernel:
Linux xen 2.6.16-2-xen-686 #1 SMP Sun Jul 16 01:42:25 UTC 2006 i686 GNU/Linux
In a dell poweredge 1950
If I swap eth0 from the broadcom to a usb ethernet card using the rtl8150
driver, the bridging works immediately.
I'm using the debian sid xen packages xen-utils 3.0.2+hg9697-2
I've put a tcpdump prepared for ethereal from the xen dom0 here:
<http://www.yerma.org/~pete/temp/xen/dom0>http://www.yerma.org/~pete/temp/xen/dom0
And one from the gateway here:
<http://www.yerma.org/~pete/temp/xen/gateway>http://www.yerma.org/~pete/temp/xen/gateway
Obviously I can work around this using the usb ethernet card, but I'd
prefer to use the gigabit nics that I've paid for.
Thanks.
-- Pete
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home