Btw,
The bridge shouldn't have an IP or mac address .. after all it's a
bridge (IMHO).
If you need an interface between dom0 and one bridge ... :
On Mon, 2006-10-30 at 16:48 +0100, Theo Cabrerizo Diem wrote:
> Hi Tiago,
>
> well ... as I said before .. I wouldn't set your eth0 mac address (on
> dom0 ) to the broadcast one ...
>
> Before setting the one on peth0, write it down and set eth0 (of your
> Dom0, not the DomU's) to it.
>
> That can be done easily on the init scripts (sorry, I use debian, so the
> network scripts are completely different) :)
>
> But the peth0 and xenbr0 mac addresses should be fe:ff:ff:ff:ff:ff =)
>
> []'s
>
> Theo Diem
>
>
> On Mon, 2006-10-30 at 12:37 -0300, Tiago Cruz wrote:
> > Hello Theo, many thanks for your help! ;)
> >
> > On Mon, 2006-10-30 at 13:59 +0100, Theo Cabrerizo Diem wrote:
> >
> > > I got that message when my xenbr0/peth0 (yes, the real eth0, renamed by
> > > xend scripts) interfaces (or whatever bridge name you are using) have a
> > > MAC address configured in it.
> >
> > Well, I don't know exactly what's happen but I've configured only my
> > eth0 on boot time, and put this on my rc.local:
> >
> > ip link set peth0 down
> > ip link set peth0 mac fe:ff:ff:ff:ff:ff
> > ip link set peth0 up
> >
> > ip link set xenbr0 down
> > ip link set xenbr0 mac fe:ff:ff:ff:ff:ff
> > ip link set xenbr0 up
> >
> > ip link set eth0 down
> > ip link set eth0 mac fe:ff:ff:ff:ff:ff arp off
> > ip link set eth0 up
> >
> >
> > Now, after boot my machine don't crash any more, but the bridge stay
> > without IP/MAC:
> >
> > xenbr0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
> > inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
> > UP BROADCAST RUNNING NOARP MTU:1500 Metric:1
> > RX packets:159 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:0
> > RX bytes:14472 (14.1 KiB) TX bytes:0 (0.0 b)
> >
> > [root@xen ~]# brctl show
> > bridge name bridge id STP enabled interfaces
> > xenbr0 8000.feffffffffff no peth0
> > vif0.0
> >
> > Anyway, look that is all working now :)
> > Many thanks!
> >
> > - Tiago Cruz
> >
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home