WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

RE: [Xen-users] Compiling Kernel with raid driver for my Dell poweredge

To: "Petersson, Mats" <Mats.Petersson@xxxxxxx>, <xen-users@xxxxxxxxxxxxxxxxxxx>
Subject: RE: [Xen-users] Compiling Kernel with raid driver for my Dell poweredge 2850 RAID Controler
From: "Nicolo" <nicolo@xxxxxxxxxxxxxxx>
Date: Thu, 14 Sep 2006 18:09:21 +0200
Delivery-date: Thu, 14 Sep 2006 09:10:33 -0700
Envelope-to: www-data@xxxxxxxxxxxxxxxxxx
Importance: Normal
In-reply-to: <907625E08839C4409CE5768403633E0BA7FF0C@xxxxxxxxxxxxxxxxx>
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
Thanks,

I just see that : 
megaraid2              28616   3  (autoclean)
scsi_mod               86052   3  (autoclean) [ide-scsi sd_mod megaraid2]

So megaraid2 needs scsi_mod ? how can i active it ? 

I put y instead of m on all 5 megaraid option but it's doesn't work :-( 

when i edit my .config, it comes to :
 
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m

instead of : 

CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
CONFIG_MEGARAID_MAILBOX=y
CONFIG_MEGARAID_LEGACY=y
CONFIG_MEGARAID_SAS=y


And how can I include a "initrd" that has the relevant modules ?
thanks

nicolo

-----Message d'origine-----
De : Petersson, Mats [mailto:Mats.Petersson@xxxxxxx]
Envoye : jeudi 14 septembre 2006 17:24
A : Nicolo; xen-users@xxxxxxxxxxxxxxxxxxx
Objet : RE: [Xen-users] Compiling Kernel with raid driver for my Dell
poweredge 2850 RAID Controler


 

> -----Original Message-----
> From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx 
> [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Nicolo
> Sent: 14 September 2006 16:08
> To: xen-users@xxxxxxxxxxxxxxxxxxx
> Subject: [Xen-users] Compiling Kernel with raid driver for my 
> Dell poweredge 2850 RAID Controler
> 
> Hello
> 
> 
> 
> I have a problem to boot my xen kernel,
> 
> I have a debian sarge 3.1 stable,  download 
> xen-3.0.2-src.tgz, extract and
> compil it with the command "make world"
> But at boot I have an error : "cannot open root filesystem sda1"
> 
> My raid controler is a perc4/di raid 5 controler
> lspci -v said :
> 0000:02:0e.0 RAID bus controller: Dell PowerEdge Expandable 
> RAID controller
> 4 (rev 06)
> 
> So I would like to know how to compil my kernel (2.6.16) with 
> raid support ?
> Must I have to set y instead of m for these options or for 
> some of these
> options :
> CONFIG_MEGARAID_NEWGEN=m
> CONFIG_MEGARAID_MM=m
> CONFIG_MEGARAID_MAILBOX=m
> CONFIG_MEGARAID_LEGACY=m
> CONFIG_MEGARAID_SAS=m

You have a choice: You can either include a "initrd" that has the
relevant modules, or use "bultin" rather than modules (i.e. give "y"
instead of "m" for the config entries - bear in mind that you may need
other modules for MEGARAID driver to work - lsmod should give you
details of which modules are linked to which other modules. I think for
example SATA requires SCSI drivers to be built too). 

--
Mats
> 
> Thanks for your reply
> 
> Nicolo
> 
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
> 
> 
> 




_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users