Re: [Xen-users] How to set up real network cards?

[Jason <fearthepenguin@xxxxxxxxxxxxxxxxx>]

try exporting every PCI id associated to that card to a single DOMU and 
see if that works.
Frank Luedke wrote:
>   I have tested with 02:00.0 and 05:06.0 but I didn't succeed.
>  My config contains pci = [ '02:00.0' ] (or 05:06.0), but not
>  even the link of my NIC is coming up.
>
>   I did a a unbind and bind as described in 5.3.1.3 in the manual.
>  The ID is showing up in pcislots:
>
> # [root@localhost pciback]# cat /sys/bus/pci/drivers/pciback/slots
> 0000:05:06.0
>
>   I am running a Fedora Core 5 here. I have edited the xenguest-install
>  to include "pci =..." in the auto-generated config. The installer is
>  also always creating a random MAC address - maybe this is the problem?
>  (I will take a look at this later).
>
>   Any other hints for me?
>
> Thanks
>  Frank
>
>
> Jason wrote:
>   
> > I think those first 4 ports should pass thru, but the last ones Im not
> > sure about because those appear to be a sub device and I haven't had
> > much luck passing just the sub piece.  You should be able to pass
> > 1:00.0  or 2:00.0 etc and it should show up as ethX in your DomU at
> > which point it is 100% regular linux networking.
> >
> >
> > Frank Luedke wrote:
> >     
> > >   Close :) I have the realtek chipset for Dom0 and I have
> > >  Marvell Yukon for the 8 DomU.
> > >
> > > [...]
> > > 01:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E
> > > Gigabit Ethernet Controller (rev 19)
> > > 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E
> > > Gigabit Ethernet Controller (rev 19)
> > > 03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E
> > > Gigabit Ethernet Controller (rev 19)
> > > 04:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E
> > > Gigabit Ethernet Controller (rev 19)
> > > 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> > > RTL-8139/8139C/8139C+ (rev 10)
> > > 05:05.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001
> > > Gigabit Ethernet Controller (rev 13)
> > > 05:06.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001
> > > Gigabit Ethernet Controller (rev 13)
> > > 05:07.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001
> > > Gigabit Ethernet Controller (rev 13)
> > > 05:08.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001
> > > Gigabit Ethernet Controller (rev 13)
> > > [...]
> > >
> > >   So it should work when I set up my networking as described
> > >  in the Manual, 5.3.1 ?
> > >
> > > .fl
> > >       
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>
>
>   
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users