WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

Re: [Xen-users] Device eth0 does not seem to be present

To: "'Itamar Reis Peixoto'" <itamar@xxxxxxxxxxxxxxxx>, <xen-users@xxxxxxxxxxxxxxxxxxx>
Subject: Re: [Xen-users] Device eth0 does not seem to be present
From: "Mito" <mito@xxxxxxxxxxxxx>
Date: Sat, 22 Apr 2006 21:01:06 -0400
Delivery-date: Sat, 22 Apr 2006 17:54:25 -0700
Envelope-to: www-data@xxxxxxxxxxxxxxxxxx
In-reply-to: <000501c66653$37e41110$0100000a@lualele>
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
Thread-index: AcZmUxu4tUEs1MVnTVy0X8ya/oXa9AAHYo0Q

Ah, sorry, I C&P’d out of nano, it is closed but was off the screen.

 

The line is closed properly, here is that entire line.

 

disk = ['file:/guests/scalix-base.img,sda1,w', 'file:/guests/scalix-base.swap,sda2,w']

 

Thanks though!

 

Also, I’ve tried specifying a mac address in the vif = [ '' ] section as well, but that didn’t do any good.

 

I checked the xend-config.sxp and the network is set to be bridged (as is set by default).

 

Any other ideas?

 


From: Itamar Reis Peixoto [mailto:itamar@xxxxxxxxxxxxxxxx]
Sent: Saturday, April 22, 2006 5:25 PM
To: Mito
Subject: **SPAM** Re: [Xen-users] Device eth0 does not seem to be present

 

if you open [ you need to close it ]

 

disk = ['file:/guests/vm1-base.img,sda1,w', 'file:/guests/vm1-base.swap,sda2,w']

 

----- Original Message -----

From: Mito

Sent: Saturday, April 22, 2006 6:12 PM

Subject: [Xen-users] Device eth0 does not seem to be present

 

Help!

 

Ok, I have a Redhat FC5 install as dom0 and a FC4 domU freshly installed (installed using QEMU and then copied contents of that image file to one that can be used by Xen).

 

The DomU boots and is useable, but I have no network!?!  I get this whenever eth0 tries to load:

 

Bringing up interface eth0:  Device eth0 does not seem to be present, delaying initialization.

[FAILED]

 

Everything I see says it’s something wrong with my domU config file, but I don’t see anything wrong with it.  Here’s my config file

 

name = "vm1"

kernel = "/boot/vmlinuz-2.6.16-1.2096_FC5xenU"

ramdisk = "/boot/initrd-2.6.16-1.2096_FC5xenU.img"

memory = 256

root = "/dev/sda1 ro"

disk = ['file:/guests/vm1-base.img,sda1,w', 'file:/guests/vm1-base.swap,s$

vif=[ '' ]

 

 

If anyone could give me a suggestion, please let me know!

 


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users