[Xen-users] howto virtual networking???

[xamiw@xxxxxxxx]

Hello all!

I have a problem to understand networking in Xen. I have set up two virtual 
domains (called domain1 and domain2) in dom0 (called domain0). But I still 
don't have a connection between domain1 and 2!
domain0 should only simulating a network without connections to any other 
networks and so there is no eth0 in domain0 and also no virtual network 
connections to domain1 or 2. It should be like this:

Domain0
+--------------------------+
|                          |
|  +-------+    +-------+  |
|  |Domain1|~~~~|Domain2|  |
|  +-------+    +-------+  |
|                          |
+--------------------------+

So, my question is which config-files are to be edited and how (network-route, 
vif-bridge, vif-route, ...)? Is there any good tutorial?

Here are the config-files of my domain0, 1 and 2 which I have edited. Any other 
config-files are still how they've been installed:

Domain0:
--------

/etc/network/interfaces:

auto lo
iface lo inet loopback
        address 127.0.0.0
        netmask 255.0.0.0

Domain1:
--------

/etc/xen/domain1.sxp:

...
# network
nics = 1


/etc/network/interfaces:

auto lo
iface lo inet loopback
        address 127.0.0.1
        netmask 255.0.0.0

auto eth0
iface eth0 inet static
        address 192.168.0.2
        netmask 255.255.255.0

Domain2:
--------

/etc/xen/domain2.sxp:

...
# network
nics = 1


/etc/network/interfaces:

auto lo
iface lo inet loopback
        address 127.0.0.1
        netmask 255.0.0.0

auto eth0
iface eth0 inet static
        address 192.168.0.1
        netmask 255.255.255.0

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users