| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
Re: [Xen-users] Xen-3.0, Mandriva-dom0 ethernet
On 11/8/05, Gémes Géza <geza@xxxxxxxxxxxxxxxxxxx> wrote:
benjamin írta:
>
>
> On 11/6/05, *Gémes Géza* <geza@xxxxxxxxxxxxxxxxxxx
> <mailto:geza@xxxxxxxxxxxxxxxxxxx
>> wrote:
>
> Hi,
>
> Sorry for crossposting, but maybe it's interesting to both lists.
>
> I've tried to run a 3.0-devel dom0 using the Mandriva 2006 packages,
> everything went fine except one very important thing :-( The dom0
> Mandriva domain had no network after starting xend which started
> xen-br0, and obviously failed to copy the config of the real eth0
> network interface, like it successfuly does on an other (Debian Sarge,
> with xen-2.0.6 ) box.
>
> Thanks in advance,
>
> Geza Gemes
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx <mailto:Xen-users@xxxxxxxxxxxxxxxxxxx>
> http://lists.xensource.com/xen-users
>
>
>
> Do you mean it's off the network or xen-br0 does not have an IP
> address assigned? Does xen-br0 have the IP address of dom0's eth0?
> Does running the below help?
>
>
> /etc/xen/scripts/network stop
> /etc/xen/scripts/network start
>
>
>
>
>
> --
> benjamin rualthanzauva
The xen-br0 interface comes up, but it hasn't any IPv4 address, in the
same time eth0 cannot be seen from the network (of course)
Apparently there is no /etc/xen/scripts/network, just
/etc/xen/scripts/network.bridge and /etc/xen/scripts/network.route, they
should be called by /etc/init.d/xend but they aren't, that script simply
calls /usr/sbin/xend, which is a python script, without any reference to
/etc/xen/scripts/network*
Shall I ad some refernces to the /etc/xen/scripts/network* scripts somwhere?
TIA
Geza Gemes
I am sorry. In 3.0, there should be network-bridge , network-nat, network-route
--
benjamin rualthanzauva
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home