WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

Re: [Xen-users] Network problems

To: "Ernst Bachmann" <e.bachmann@xxxxxxxx>, <xen-users@xxxxxxxxxxxxxxxxxxx>
Subject: Re: [Xen-users] Network problems
From: Stephan Böni <boeni@xxxxxx>
Date: Fri, 16 Sep 2005 14:01:51 +0200
Delivery-date: Fri, 16 Sep 2005 11:59:41 +0000
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
Thread-index: AcW6pGfog59Pa+TFT2KB0Advj3E7GgAEfFbA
Thread-topic: [Xen-users] Network problems
Yes. It works. Thanks a lot.

Stephan


-----Ursprüngliche Nachricht-----
Von: Ernst Bachmann [mailto:e.bachmann@xxxxxxxx]
Gesendet: Freitag, 16. September 2005 11:52
An: xen-users@xxxxxxxxxxxxxxxxxxx
Betreff: Re: [Xen-users] Network problems


On Friday 16 September 2005 11:29, Stephan Böni wrote:

> "/etc/xen/config":
> nics=2
> vif = [ 'mac=aa:cc:00:00:00:01, bridge=xen-br0' ]
> vif = [ 'mac=aa:cc:00:00:00:02, bridge=xen-br1' ]

That lines should read:
vif = [ 'mac=aa:cc:00:00:00:01, bridge=xen-br0',
          'mac=aa:cc:00:00:00:02, bridge=xen-br1' ]

You're assigning a variable here, setting it twice will override the first 
value...

> "ifconfig" of xen0 (xenU has been started):
> eth0      Link encap:Ethernet  HWaddr 00:14:5E:0A:53:04
> eth1      Link encap:Ethernet  HWaddr 00:14:5E:0A:53:05
> lo        Link encap:Local Loopback
> vif16.1   Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF


Looks like dom0 is missing a vif and the two bridge devices here, "xen-br0" 
and "xen-br1" should show up on ifconfig as well. (at least xen-br1 with the 
broken xenU config)

Could you check "brctl show" to see if they were created at all?
Maybe also check if you can use brctl to create bridges manually.

/Ernst

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

<Prev in Thread] Current Thread [Next in Thread>