hi,
first, sorry for the very late answer
On Mo, 2005-07-18 at 09:19 -0700, JIT LEISHANGTHEM wrote:
> to associate the new bridge with the vif of this
> virtual (domU). That should do the trick.
ok, what i did: I build a dom0 kernel with all iptables options, ISDN
support, traffic shaper, pppd device, etc.
my grub config looks like:
title Xen 2.0 / XenLinux 2.6.11
kernel /boot/xen.gz dom0_mem=64000
module /boot/xen-linux-2.6.11.12-xen0.xen.kernel root=/dev/hda1 ro
console=tty0
i have two network cards:
0000:00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
0000:00:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
i created a second bridge:
/etc/xen/scripts/network start bridge=xen-br1 netdev=eth1
(how can i do it automatically, but /etc/init.d/<bridge-start-script>)
xen-br1 Protokoll:Ethernet Hardware Adresse 00:02:44:3C:B1:61
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:37 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
Kollisionen:0 Sendewarteschlangenlänge:0
RX bytes:1036 (1.0 KiB) TX bytes:0 (0.0 b)
my web-config:
nics=2
vif = ['mac=aa:00:00:00:00:03, bridge=xen-br0']
vif = ['mac=ab:00:00:00:00:04, bridge=xen-br1']
dhcp ="off"
ip="192.168.100.4"
netmask="255.255.255.0"
gateway="192.168.100.253"
hostname="web"
now i was able to setup an eth1 device (only for testing), but i'm not
sure, that it is right. I put down eth1 and now i want to testing.
Is until here, everything ok? Could i use pppd for rp-pppoe via eth1 in
DomU (web)?
cu denny
--
Sicherheit verständlich http://www.sides.de
GnuPG Key http://pgp.upb.de:11371/pks/lookup?op=get&search=0xAB7D3FE0
signature.asc
Description: This is a digitally signed message part
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home