Hi Scott,
Haven't had time to follow this thread in detail but I'm told you're seeing a
pretty weird hang...
Do you have another machine you could connect to this one using a null modem
cable? Will a serial link, you'd be able to talk *directly* to Xen and
extract debugging information.
Alternatively, if you're feeling brave you could try running unstable on this
box to see if Xen 3.0 solves your problems. Unfortunately, that code is
still rather unfriendly to use at the moment.
Cheers,
Mark
On Friday 05 August 2005 15:08, Scott Koranda wrote:
> > Hi Scott,
> >
> > I'm not sure if I can help, but I'll take a stab:
>
> Thanks much.
>
> > >kernel = "/boot/vmlinuz-2.6.11-xenU"
> > >ramdisk = "/boot/initrd-2.6-xenU.img"
> > >memory = 512
> > >name = "FedoraCore4-01"
> > >disk = [ 'phy:hdc1,hda1,w', 'phy:hda2,hda3,w']
> > >dhcp="dhcp"
> > >root = "/dev/hda1 ro"
> > >extra = "3"
> >
> > Perhaps take out anything that has a sane default.
> > eg. dhcp and ramdisk.
>
> Ok. I removed both.
>
> > >I also edited /etc/fstab on the FC4 partition in /dev/hdc1 and
> > >changed / to be mounted on hda1 (the virtual one I assume
> > >provided by Xen) and swap to be mounted on hda3 (again the
> > >virtual one).
> >
> > For debugging and sanity purposes it might be an idea to
> > leave your fstab alone (for the moment), and make the export line:
> >
> > disk = [ 'phy:hdc1,hdc1,w', 'phy:hdc2,hdc2,w']
> >
> > Then you will still be able to boot FC4 normally.
>
> Good idea. Ok, I have done that.
>
> I tried again both FC4 and ttylinux, but found the same
> immediate hang...
>
> > >With all this in place I then do
> > >
> > >xend start
> > >xm create -c /etc/xen/xmfc4
> > >
> > >I see the output
> > >
> > >Using config file "/etc/xen/xmfc4"
> > >
> > >and then the hardware hangs immediately and completely...no response
> > >in dom0 from keyboard and the machine is no longer ping-able.
> >
> > I'm interested in how 'immediate' this is as I suspect you have a
> > problem with your initrd.
>
> As soon as I enter the command ' xm create -c /etc/xen/xmfc4 '
> I see the single line
>
> Using config file "/etc/xen/xmfc4".
>
> and then nothing else. The keyboard does not respond from that
> point on and the machine can no longer be pinged.
>
> When I created the initrd for the dom0 domain (which seems to
> boot fine) I did this:
>
> mkinitrd /boot/initrd-2.6.12-1.1372_FC3-2.6-xen0 2.6.11.10-xen0
>
> When I created the initrd for the domU domain I did this:
>
> mkinitrd /boot/initrd-2.6-xenU 2.6.11.10-xenU
>
> > You might be able to see something with
> >
> > xm create xmfc4 && xm console n
> >
> > (You need to know what the next console number will be, of course!:))
> >
> > >I also tried the example from the manual (ttylinux): I
> > >downloaded ttylinux-xen.bz2, unzipped it, and created the
> > >configuration file
> > >
> > >kernel = "/boot/vmlinuz-2.6-xenU"
> > >memory = 64
> > >name = 'ttylinux'
> > >nics = 1
> > >ip = '1.2.3.4'
> > >disk = ['file:/root/ttylinux-xen,sda1,w']
> > >root = '/dev/sda1 ro'
> > >
> > >When I try to run
> > >
> > >xend start
> > >xm create -c /etc/xen/ttylinux
> > >
> > >I get the same result--hardware hangs immediately and
> > >completely with no keyboard and no network (not ping-able).
> >
> > This shoots a hole in my initrd theory, but try chaining the console
> > command for any signs of output.
>
> I see the same single line of output and then the hardware
> hangs:
>
> [root@garlic boot]# xm create /etc/xen/xmfc4 && xm console 1
> Using config file "/etc/xen/xmfc4".
>
> > What options have you set in your dom0 and domU kernels?
>
> I am not exactly sure what you mean.
>
> I am using the binary tarball xen-2.0.6-install-x86_32.tgz.
> Neither the dom0 or domU kernels are kernels that I compiled
> myself.
>
> My grub.conf looks like this:
>
> title Xen 2.0 / XenLinux 2.6
> kernel /boot/xen-2.0.gz dom0_mem=131072
> module /boot/vmlinuz-2.6-xen0 root=/dev/hda1 ro console=tty0
> module /boot/initrd-2.6.12-1.1372_FC3-2.6-xen0
>
> I took this from section 2.4.1 of the manual, so I guess I am
> passing the options dom0_mem=131072 and console=tty0 to dom0.
> When I try to start a domU I am using the configuration file I
> posted previously.
>
> > What do your mkinitrd configs contain?
>
> Sorry, I am not sure what you mean. The mkinitrd commands I
> ran are the ones above. Other then that I can show you
>
> [root@garlic boot]# cat /etc/modprobe.conf
> alias eth0 8139too
> alias snd-card-0 snd-intel8x0
> options snd-card-0 index=0
> install snd-intel8x0 /sbin/modprobe --ignore-install
> snd-intel8x0 && /usr/sbin/alsactl restore >/dev/null 2>&1 || :
> remove snd-intel8x0 { /usr/sbin/alsactl store >/dev/null 2>&1
>
> || : ; }; /sbin/modprobe -r --ignore-remove snd-intel8x0
>
> alias usb-controller ehci-hcd
> alias usb-controller1 uhci-hcd
>
> Thanks,
>
> Scott
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home