Hi,
Thank you for the reply.
I did a fresh hg pull again(08/02).
(and aplied a patch of "vaddr=0".)
>
>It might be worth disabling PCMCIA (yenta) and seeing if that helps.
>There's been several complaints about shared interrupts not working.
Then I tried to be disabling PCMCIA (yenta) and so on.
But the network isn't enable.
- lsmod
====================================
Module Size Used by
video 14212 0
thermal 11016 0
processor 14884 1 thermal
fan 3460 0
button 5008 0
battery 7684 0
ac 3460 0
sis_agp 6276 1
agpgart 28872 1 sis_agp
8139too 24576 0
====================================
- cat /proc/interrupts
====================================
CPU0
1: 99 Phys-irq i8042
9: 0 Phys-irq acpi
12: 101 Phys-irq i8042
14: 111080 Phys-irq ide0
15: 217 Phys-irq ide1
17: 0 Phys-irq eth0
20: 0 Phys-irq ohci_hcd:usb1
21: 0 Phys-irq ohci_hcd:usb2
22: 0 Phys-irq ohci_hcd:usb3
256: 0 Dynamic-irq ctrl-if
257: 8381 Dynamic-irq timer0
258: 0 Dynamic-irq console
259: 0 Dynamic-irq net-be-dbg
NMI: 0
LOC: 0
ERR: 0
MIS: 0
====================================
>
>Also, compare the boot messages (particularly wrt to interrupt routing)
>of a Xen/dom0 boot vs an equivalently configured native kernel.
>
So, I checked dmesg as you say.
But I did not find a error messages.
Is there any other check points?
Please tell me how to debug it.
================================
--- orig/orig_dmesg.txt 2005-08-03 02:14:32.000000000 +0900
+++ xen/dmesg.txt 2005-08-03 02:20:31.000000000 +0900
@@ -1,21 +1,13 @@
-Linux version 2.6.12 (root@xxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc バージョン
4.0.0 20050519 (Red Hat 4.0.0-8)) #1 Wed Aug 3 02:04:38 JST 2005
+Linux version 2.6.12-xen0 (root@xxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc バージ
ョン 4.0.0 20050519 (Red Hat 4.0.0-8)) #2 Wed Aug 3 01:33:07 JST 2005
BIOS-provided physical RAM map:
- BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
- BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
- BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 000000002dff0000 (usable)
- BIOS-e820: 000000002dff0000 - 000000002dff3000 (ACPI NVS)
- BIOS-e820: 000000002dff3000 - 000000002e000000 (ACPI data)
- BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
- BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
+ Xen: 0000000000100000 - 0000000010000000 (usable)
0MB HIGHMEM available.
-735MB LOWMEM available.
-found SMP MP-table at 000f5300
-On node 0 totalpages: 188400
- DMA zone: 4096 pages, LIFO batch:1
- Normal zone: 184304 pages, LIFO batch:31
+256MB LOWMEM available.
+On node 0 totalpages: 65536
+ DMA zone: 65536 pages, LIFO batch:31
+ Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
+found SMP MP-table at 000f5300
DMI 2.3 present.
ACPI: RSDP (v000 FUJ ) @ 0x000f7460
ACPI: RSDT (v001 FUJ SAXO 0x36312e31 AWRD 0x0100000d) @
0x2dff3000
@@ -25,7 +17,6 @@
ACPI: DSDT (v001 FUJ SAXO 0x312e3136 MSFT 0x0100000d) @
0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
-Processor #0 15:2 APIC version 20
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
@@ -35,39 +26,35 @@
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
-Allocating PCI resources starting at 2e000000 (gap: 2e000000:d0c00000)
+IRQ lockup detection disabled
+Allocating PCI resources starting at 10000000 (gap: 10000000:f0000000)
Built 1 zonelists
-Kernel command line: root=/dev/hda2 ro rhgb
-mapped APIC to ffffd000 (fee00000)
-mapped IOAPIC to ffffc000 (fec00000)
+Kernel command line: root=/dev/hda2 ro rhgb selinux=0
Initializing CPU#0
-PID hash table entries: 4096 (order: 12, 65536 bytes)
-Detected 2390.508 MHz processor.
-Using tsc for high-res timesource
+PID hash table entries: 2048 (order: 11, 32768 bytes)
+Xen reported: 2390.290 MHz processor.
Console: colour VGA+ 80x25
-Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
-Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
-Memory: 741464k/753600k available (2481k kernel code, 11576k reserved,
825k data, 320k init, 0k highmem)
+Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
+Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
+vmalloc area: d0800000-f53fe000, maxmem 2d800000
+Memory: 251520k/262144k available (2685k kernel code, 9500k reserved,
889k data, 312k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode...
Ok.
-Calibrating delay loop... 4718.59 BogoMIPS (lpj=2359296)
+Calibrating delay loop... 4771.02 BogoMIPS (lpj=23855104)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
-CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
00004400 00000000 00000000
+CPU: After all inits, caps: bfebd3f1 00000000 00000000 00000080
00004400 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
-Checking 'hlt' instruction... OK.
+Checking 'hlt' instruction... disabled
ENABLING IO-APIC IRQs
-..TIMER: vector=0x31 pin1=2 pin2=-1
checking if image is initramfs... it is
-Freeing initrd memory: 983k freed
+Freeing initrd memory: 2033k freed
NET: Registered protocol family 16
-PCI: PCI BIOS revision 2.10 entry at 0xfa860, last bus=3
PCI: Using configuration type 1
-mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
@@ -86,13 +73,30 @@
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 2 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 2 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 2 3 4 5 *6 7 9 10 11 12 14 15)
+xen_mem: Initialising balloon driver.
+xen_mem: Delaying watcher init until xenstore is available
SCSI subsystem initialized
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
+Grant table initialized
+
+ ***************************************************************
+ ***************************************************************
+ ** WARNING: Currently emulating unsupported memory accesses **
+ ** in /lib/tls libraries. The emulation is very **
+ ** slow. To ensure full performance you should **
+ ** execute the following as root: **
+ ** mv /lib/tls /lib/tls.disabled **
+ ** Offending process: hotplug (pid=82) **
+ ***************************************************************
+ ***************************************************************
+
+Pausing... 5<6>IA-32 Microcode Update Driver: v1.14-xen <tigran@veritas.
com>
Simple Boot Flag at 0x35 set to 0x80
-IA-32 Microcode Update Driver: v1.14 <tigran@xxxxxxxxxxx>
Initializing Cryptographic API
Continuing...
+
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
io scheduler noop registered
@@ -106,6 +110,11 @@
pcnet32.c:v1.30j 29.04.2005 tsbogend@xxxxxxxxxxxxxxxx
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
+Xen virtual console successfully installed as ttyS0
+Event-channel device installed.
+Blkif backend is using grant tables.
+Initialising Xen netif backend
+Blkif frontend is using grant tables.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
Probing IDE interface ide0...
@@ -157,24 +166,24 @@
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: automatically using best checksumming function: pIII_sse
- pIII_sse : 3020.000 MB/sec
-raid5: using function: pIII_sse (3020.000 MB/sec)
+ pIII_sse : 1119.200 MB/sec
+raid5: using function: pIII_sse (1119.200 MB/sec)
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.
com
NET: Registered protocol family 2
-IP: routing cache hash table of 8192 buckets, 64Kbytes
-TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
-TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
-TCP: Hash tables configured (established 131072 bind 65536)
+input: AT Translated Set 2 keyboard on isa0060/serio0
+IP: routing cache hash table of 2048 buckets, 16Kbytes
+TCP established hash table entries: 16384 (order: 5, 131072 bytes)
+TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
+TCP: Hash tables configured (established 16384 bind 16384)
NET: Registered protocol family 1
NET: Registered protocol family 17
-input: AT Translated Set 2 keyboard on isa0060/serio0
-Bridge firewalling registered
-Freeing unused kernel memory: 320k freed
logips2pp: Detected unknown logitech mouse model 1
+input: PS/2 Logitech Mouse on isa0060/serio1
+Bridge firewalling registered
+Freeing unused kernel memory: 312k freed
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
-input: PS/2 Logitech Mouse on isa0060/serio1
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17
eth0: RealTek RTL8139 at 0xe400, 00:40:d0:34:b8:bc, IRQ 17
@@ -195,3 +204,27 @@
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1052248k swap on /dev/hda3. Priority:-1 extents:1
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
+NETDEV WATCHDOG: eth0: transmit timed out
+eth0: Transmit timeout, status 0c 0005 c07f media 10.
+eth0: Tx queue start entry 4 dirty entry 0.
+eth0: Tx descriptor 0 is 0008a03c. (queue head)
+eth0: Tx descriptor 1 is 0008a03c.
+eth0: Tx descriptor 2 is 0008a03c.
+eth0: Tx descriptor 3 is 0008a03c.
+eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
+NETDEV WATCHDOG: eth0: transmit timed out
+eth0: Transmit timeout, status 0c 0005 c07f media 10.
+eth0: Tx queue start entry 4 dirty entry 0.
+eth0: Tx descriptor 0 is 0008a05b. (queue head)
+eth0: Tx descriptor 1 is 0008a05b.
+eth0: Tx descriptor 2 is 0008a05b.
+eth0: Tx descriptor 3 is 0008a07c.
+eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
+NETDEV WATCHDOG: eth0: transmit timed out
+eth0: Transmit timeout, status 0c 0005 c07f media 10.
+eth0: Tx queue start entry 4 dirty entry 0.
+eth0: Tx descriptor 0 is 0008a07c. (queue head)
+eth0: Tx descriptor 1 is 0008a07c.
+eth0: Tx descriptor 2 is 0008a07c.
+eth0: Tx descriptor 3 is 0008a07c.
+eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
================================
xm dmesg is the bellow.
=================================================== __ __
_____ ___ _ _
\ \/ /___ _ __ |___ / / _ \ __| | _____ _____| |
\ // _ \ '_ \ |_ \| | | |__ / _` |/ _ \ \ / / _ \ |
/ \ __/ | | | ___) | |_| |__| (_| | __/\ V / __/ |
/_/\_\___|_| |_| |____(_)___/ \__,_|\___| \_/ \___|_|
http://www.cl.cam.ac.uk/netos/xen
University of Cambridge Computer Laboratory
Xen version 3.0-devel (root@xxxxxxxxxxxxxxxx) (gcc バージョン 4.0.0
20050519 (Red Hat 4.0.0-8)) 2005年 8月 3日 水曜日 01:34:24 JST
Latest ChangeSet: Wed Aug 3 08:13:50 2005
565cec5b9cc2d861c698f913cb9af3dec4f78726
(XEN) Physical RAM map:
(XEN) 0000000000000000 - 000000000009fc00 (usable)
(XEN) 000000000009fc00 - 00000000000a0000 (reserved)
(XEN) 00000000000f0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 000000002dff0000 (usable)
(XEN) 000000002dff0000 - 000000002dff3000 (ACPI NVS)
(XEN) 000000002dff3000 - 000000002e000000 (ACPI data)
(XEN) 00000000fec00000 - 00000000fec01000 (reserved)
(XEN) 00000000fee00000 - 00000000fee01000 (reserved)
(XEN) 00000000ffff0000 - 0000000100000000 (reserved)
(XEN) System RAM: 735MB (753212kB)
(XEN) Xen heap: 10MB (10660kB)
(XEN) PAE enabled, limit: 16 GB
(XEN) found SMP MP-table at 000f5300
(XEN) DMI 2.3 present.
(XEN) Using APIC driver default
(XEN) ACPI: RSDP (v000 FUJ ) @
0x000f7460
(XEN) ACPI: RSDT (v001 FUJ SAXO 0x36312e31 AWRD 0x0100000d) @
0x2dff3000
(XEN) ACPI: FADT (v002 FUJ SAXO 0x36312e31 AWRD 0x0100000d) @
0x2dff3040
(XEN) ACPI: BOOT (v001 FUJ SAXO 0x36312e31 AWRD 0x0100000d) @
0x2dff5840
(XEN) ACPI: MADT (v001 FUJ SAXO 0x36312e31 AWRD 0x0100000d) @
0x2dff5880
(XEN) ACPI: DSDT (v001 FUJ SAXO 0x312e3136 MSFT 0x0100000d) @
0x00000000
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 15:2 APIC version 20
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 2, version 2, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Initializing CPU#0
(XEN) Detected 2390.305 MHz processor.
(XEN) Using scheduler: Simple EDF Scheduler (sedf)
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 8K
(XEN) CPU: L2 cache: 512K
(XEN) CPU: Hyper-Threading is disabled
(XEN) CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
(XEN) Total of 1 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) ..TIMER: vector=0x31 pin1=2 pin2=-1
(XEN) Platform timer is 1.193MHz PIT
(XEN) Brought up 1 CPUs
(XEN) mtrr: v2.0 (20020519)
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen-ELF header found: 'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=3.0,
VIRT_BASE=0xC0000000,PAE=yes,LOADER=generic'
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 10000000->20000000
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: c0100000->c05133e4
(XEN) Init. ramdisk: c0514000->c0710400
(XEN) Phys-Mach map: c0711000->c0751000
(XEN) Page tables: c0751000->c075a000
(XEN) Start info: c075a000->c075b000
(XEN) Boot stack: c075b000->c075c000
(XEN) TOTAL: c0000000->c0800000
(XEN) ENTRY ADDRESS: c0100000
(XEN) Initrd len 0x1fc400, start at 0xc0514000
(XEN) Scrubbing Free RAM: ........done.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
input to Xen).
===================================================
Thanks,
Akio
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home