WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 		  
Home Products Support Community News
 
   
 

xen-users

[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[Xen-users] [Xen-devel] HELP! LOSING NETWORK CONNECTION after XEND START

from [wei huang] [Permanent Link][Original]
To: Xen-users@xxxxxxxxxxxxxxxxxxx
Subject: [Xen-users] [Xen-devel] HELP! LOSING NETWORK CONNECTION after XEND START (fwd)
From: wei huang <huanwei@xxxxxxxxxxxxxxxxxx>
Date: Fri, 15 Jul 2005 18:07:55 -0400 (EDT)
Delivery-date: Fri, 15 Jul 2005 22:06:35 +0000
Envelope-to: www-data@xxxxxxxxxxxxxxxxxxx
List-help: <mailto:xen-users-request@lists.xensource.com?subject=help>
List-id: Xen user discussion <xen-users.lists.xensource.com>
List-post: <mailto:xen-users@lists.xensource.com>
List-subscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=subscribe>
List-unsubscribe: <http://lists.xensource.com/cgi-bin/mailman/listinfo/xen-users>, <mailto:xen-users-request@lists.xensource.com?subject=unsubscribe>
Sender: xen-users-bounces@xxxxxxxxxxxxxxxxxxx 
Hi,

I am using the latest xen-unstable by Jul. 15th. Everything is dom0 works
fine. But as soon as I input 'xend start', all the network connections
just die.

I am using Broadcom NetXtreme network card, with tg3 driver.

I have collected some basic information and post it in the following part.
I remember some one seems to meet the same problem before, and I try to
find the solution is that thread, but no luck.

Could anyone give any help? Thanks.

======================================================================
Result for ifconfig:

BEFORE xend start:
eth0      Link encap:Ethernet  HWaddr 00:0D:60:9A:15:60
          inet addr:9.2.72.112  Bcast:9.2.72.127  Mask:255.255.255.128
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:89 errors:0 dropped:0 overruns:0 frame:0
          TX packets:83 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:14402 (14.0 KiB)  TX bytes:7781 (7.5 KiB)
          Interrupt:16

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:16 errors:0 dropped:0 overruns:0 frame:0
          TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:1168 (1.1 KiB)  TX bytes:1168 (1.1 KiB)
AFTER xend start:
eth0      Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          UP BROADCAST RUNNING NOARP MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:576 (576.0 b)
          Interrupt:16

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:16 errors:0 dropped:0 overruns:0 frame:0
          TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:1168 (1.1 KiB)  TX bytes:1168 (1.1 KiB)

veth0     Link encap:Ethernet  HWaddr 00:0D:60:9A:15:60
          inet addr:9.2.72.112  Bcast:9.2.72.127  Mask:255.255.255.128
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:552 (552.0 b)

vif0.0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:6 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:552 (552.0 b)  TX bytes:0 (0.0 b)

xen-br0   Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:6 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:468 (468.0 b)  TX bytes:0 (0.0 b)


=================================================================
Result for 'ip route show'
BEFORE xend start:
9.2.72.0/25 dev eth0  proto kernel  scope link  src 9.2.72.112
169.254.0.0/16 dev eth0  scope link
default via 9.2.72.1 dev eth0
AFTER:
9.2.72.0/25 dev veth0  proto kernel  scope link  src 9.2.72.112
169.254.0.0/16 dev veth0  scope link
default via 9.2.72.1 dev veth0

=================================================================
Result for 'ip addr show'
BEFORE:
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
2: vif0.0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop
    link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff
3: veth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop
    link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
4: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
    link/ether 00:0d:60:9a:15:60 brd ff:ff:ff:ff:ff:ff
    inet 9.2.72.112/25 brd 9.2.72.127 scope global eth0
5: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
    link/ether 00:0d:60:9a:15:61 brd ff:ff:ff:ff:ff:ff
AFTER:
1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
2: vif0.0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue
    link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff
3: veth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue
    link/ether 00:0d:60:9a:15:60 brd ff:ff:ff:ff:ff:ff
    inet 9.2.72.112/25 brd 9.2.72.127 scope global veth0
4: eth0: <BROADCAST,MULTICAST,NOARP,UP> mtu 1500 qdisc pfifo_fast qlen
1000
    link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff
5: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
    link/ether 00:0d:60:9a:15:61 brd ff:ff:ff:ff:ff:ff
6: xen-br0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue
    link/ether fe:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff

=====================================================================
Result for "route -n"
BEFORE:
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use  Iface
9.2.72.0        0.0.0.0         255.255.255.128 U     0      0        0   eth0
169.254.0.0     0.0.0.0         255.255.0.0     U     0      0        0   eth0
0.0.0.0         9.2.72.1        0.0.0.0         UG    0      0        0   eth0
AFTER:
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
9.2.72.0        0.0.0.0         255.255.255.128 U     0      0        0  veth0
169.254.0.0     0.0.0.0         255.255.0.0     U     0      0        0  veth0
0.0.0.0         9.2.72.1        0.0.0.0         UG    0      0        0  veth0

======================================================================
xm log after xend start: (last few lines)
2005-07-15 17:14:44 xend] DEBUG (XendDomainInfo:177) config='None'

[2005-07-15 17:14:44 xend] INFO (SrvServer:63) unix
path=/var/lib/xend/xend-socket
[2005-07-15 17:14:44 xend] INFO (XendRoot:128) EVENT> xend.start 0
[2005-07-15 17:14:44 xend] INFO (process:35) [network] network start
bridge=xen-br0 netdev=eth0 antispoof=no

=======================================================================
dmesg after xend start:
device vif0.0 entered promiscuous mode
xen-br0: port 1(vif0.0) entering learning state
xen-br0: topology change detected, propagating
xen-br0: port 1(vif0.0) entering forwarding state
device eth0 entered promiscuous mode
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is off for TX and off for RX.
xen-br0: port 2(eth0) entering learning state
xen-br0: topology change detected, propagating
xen-br0: port 2(eth0) entering forwarding state




Regards,
Wei



_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
  • [Xen-users] [Xen-devel] HELP! LOSING NETWORK CONNECTION after XEND START (fwd), wei huang <=
Previous by Date:  [Xen-users] xend start fails, Eric Anderson
Next by Date:  Re: [Xen-users] lo doesn't come up, Thomas Lohmüller
Previous by Thread:  [Xen-users] xend start fails, Eric Anderson
Next by Thread:  [Fwd: Re: [Xen-users] lo doesn't come up], John Fairbairn
Indexes:  [Date] [Thread] [Top] [All Lists]
 
   

Copyright , Citrix Systems Inc. All rights reserved. Legal and Privacy