|
|
|
|
|
|
|
|
|
|
xen-users
Re: [Xen-users] Mtu/802.1Q limits on vif ??
Yann Dupont wrote:
[..]
The idea is to get the 802.1Q port on the Router6 host (via the bridge),
and then use virtual interfaces (eth1.xxx where xxx are the vlan ID)
inside the XenU.
Well, it works, only if I use mtu 1496 for the vifs.
I know the physical interfaces (eepro1000) can cope with vlan natively.
Don't know for the bridge code but i'm not aware of limitations there.
This happens on real hardware too. The usual workaround is to set the
eth0 to MTU 1504. Like this you can set the vlans to 1500.
Never tried it in xen, thou...
Peace,
Nuno Silva
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
|
|