[Xen-users] Problems building custom kernel for i865 chipset

[CLIFFORD ILKAY <clifford_ilkay@xxxxxxxxxxx>]

Hello,

Emboldened by my experience at getting a Mandriva 2005 LE domU running on a 
Mandriva 2005 LE dom0, I am attempting to compile a custom kernel to deal 
with some of the errors that I was getting on startup, such as missing USB 
modules. The output of lspci follows.

[root@localhost xen-2.0]# lspci
00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub 
Interface (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82865G Integrated 
Graphics Controller (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI 
Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI 
Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI #3 
(rev 02)
00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI 
Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI 
Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface 
Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE 
Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 
02)
00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 
02)
01:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. 
RTL-8139/8139C/8139C+ (rev 10)
#####################################################

After configuring the new kernel, I do "make dist" but have some problems 
during the module building phase. The relevant parts are excerpted below:

  Building modules, stage 2.
  MODPOST
*** Warning: "page_address" [drivers/char/drm/drm.ko] undefined!
*** Warning: "page_address" [drivers/char/agp/intel-agp.ko] undefined!
*** Warning: "page_address" [drivers/char/agp/agpgart.ko] undefined!

[snip]


  INSTALL net/ipv4/netfilter/iptable_raw.ko
if [ -r System.map ]; then /sbin/depmod -ae -F System.map 
-b /home/cilkay/xen-2.0/dist/install -r 2.6.11-xen0; fi
WARNING: 
/home/cilkay/xen-2.0/dist/install/lib/modules/2.6.11-xen0/kernel/drivers/char/drm/drm.ko
 
needs unknown symbol page_address
WARNING: 
/home/cilkay/xen-2.0/dist/install/lib/modules/2.6.11-xen0/kernel/drivers/char/agp/agpgart.ko
 
needs unknown symbol page_address
WARNING: 
/home/cilkay/xen-2.0/dist/install/lib/modules/2.6.11-xen0/kernel/drivers/char/agp/intel-agp.ko
 
needs unknown symbol page_address
make[3]: *** [_modinst_post] Error 1
make[3]: Leaving directory `/home/cilkay/xen-2.0/linux-2.6.11-xen0'
make[2]: *** [build] Error 2
make[2]: Leaving directory `/home/cilkay/xen-2.0'
make[1]: *** [linux-2.6-xen0-build] Error 2
make[1]: Leaving directory `/home/cilkay/xen-2.0'
make: *** [kernels] Error 1
#####################################################



Here is the excerpt from the relevant .config section:

CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=m
CONFIG_AGP_INTEL_MCH=m
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
#####################################################


How can I work around this?
-- 
Regards,

Clifford Ilkay
Dinamis Corporation
3266 Yonge Street, Suite 1419
Toronto, ON
Canada  M4N 3P6

+1 416-410-3326

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users