Re: [Xen-users] Booting halts

[Konstantin Selivanov <konstantin.selivanov@xxxxxxxxx>]

Alas, debug mode give me nothing. Same error and same logs. Normal booting of my 2.6.11 kernel goes like this

kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
kernel: NFORCE2: IDE controller at PCI slot 0000:00:09.0
kernel: NFORCE2: chipset revision 162
kernel: NFORCE2: not 100%% native mode: will probe irqs later
kernel: NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
kernel: NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
...

but if i try xen-patched 2.6.10 it says following and halt

kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

I want to try 2.6.11 kernel to work with xen. Is there way to do that? Where can i get xen patches?

  Konstantin.

On 5/8/05, Kip Macy <kip.macy@xxxxxxxxx> wrote:

It may be some ACPI related issue that will be fixed in the not too
distant future. Try enabling debug and verbose in xen - that *might*
tell you more.

    -Kip

On 5/7/05, Konstantin Selivanov < konstantin.selivanov@xxxxxxxxx> wrote:
> Hello.
>
>  Can anyone answer my newbie questions? When i try to boot xen image it
> halts after string
>  ide: Assuming 33MHz system bus...
>
>  I have NVIDIA nForce2 chip and use Gentoo Linux. I looked for same problem
> in archives but
>  didn't find anything useful. What's wrong? Is this hardware supported?
>
>  With best regards, Konstantin.
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>
>

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users