Macros to be called by PAL, SAL and EFI to switch into
and out of EFI RID.
Cc: Tristan Gingold <tgingold@xxxxxxx>
Cc: Isaku Yamahata <yamahata@xxxxxxxxxxxxx>
Cc: Alex Williamson <alex.williamson@xxxxxx>
Cc: Aron Griffis <aron@xxxxxx>
Signed-off-by: Simon Horman <horms@xxxxxxxxxxxx>
---
Thu, 22 Nov 2007 00:20:54 -0700
* Add XEN_EFI_RR_DECLARE to help consistent declarations
* Fix up vairous compile errors in the !XEN case
* Pass unsigned long as the second argement to to ia64_rid
to ensure that it is wide enough
Mon, 03 Dec 2007 17:29:04 +0900
* Shift VRN 61 bits to the left when calling ia64_get_rr() and
ia64_set_rr()
Thu, 24 Jan 2008 12:15:55 +0900
* Use set_one_rr_efi() instead of set_rr() so
that TR (TLB) entries are repined as neccessary.
* Do not enable VHPT in EFI RID.
- There seems to be no good reason to enable it,
and the current code dies if it is enabled.
Perhaps the VHPT TR would need to be repined?
Mon, 21 Apr 2008 11:40:32 +1000
* Remove ia64_srlz_d from XEN_EFI_RR_RESTORE and XEN_EFI_RR_SAVE
as serialisation is done by set_one_rr_efi()
Fri, 25 Apr 2008 13:39:24 +1000
* Use __IA64_UL_CONST() to simplify the declaration of XEN_EFI_RID_NO
Thanks to Yamahata-san
Fri, 25 Apr 2008 16:50:08 +1000
* Tidy up comment describing RID selection
Thanks to Tristan Gingold
Mon, 28 Apr 2008 11:08:55 +1000
* Rename XEN_EFI_RID to XEN_EFI_RR, as it represents an entry
that can be placed in a region register (RR), which inludes
the Region Identifier (RID) as well as page size and vhpt data
This change also required a trivial update to
"Add identity mapping of EFI memory to alt_dtlb_miss"
(rid-asm-alt_dtlb_miss.patch)
Tue, 15 Jul 2008 09:51:54 +1000
* Rename XEN_EFI_RR_SAVE as XEN_EFI_RR_ENTER and
XEN_EFI_RR_RESTORE as XEN_EFI_RR_LEAVE as a subsequent patch will add
code to map and unmap PAL at these points.
Index: xen-unstable.hg/xen/include/asm-ia64/linux-xen/linux/efi.h
===================================================================
--- xen-unstable.hg.orig/xen/include/asm-ia64/linux-xen/linux/efi.h
2008-07-15 09:48:25.000000000 +1000
+++ xen-unstable.hg/xen/include/asm-ia64/linux-xen/linux/efi.h 2008-07-15
10:23:42.000000000 +1000
@@ -1,6 +1,8 @@
#ifndef _LINUX_EFI_H
#define _LINUX_EFI_H
+#ifndef __ASSEMBLY__
+
/*
* Extensible Firmware Interface
* Based on 'Extensible Firmware Interface Specification' version 0.9, April
30, 1999
@@ -408,4 +410,93 @@ struct efi_generic_dev_path {
u16 length;
} __attribute ((packed));
+#ifdef XEN
+/*
+ * According to xen/arch/ia64/xen/regionreg.c the RID space is broken up
+ * into large-blocks. Each block belongs to a domain, except 0th block,
+ * which is broken up into small-blocks. The small-blocks are used for
+ * metaphysical mappings, again one per domain, except for the 0th
+ * small-block which is unused other than very early on in the
+ * hypervisor boot.
+ *
+ * By default each large-block is 18 bits wide, which is also the minimum
+ * allowed width for a block. Each small-block is by default 1/64 the width
+ * of a large-block, which is the maximum division allowed. In other words
+ * each small-block is at least 12 bits wide.
+ *
+ * The portion of the 0th small-block that is used early on during
+ * the hypervisor boot relates to IA64_REGION_ID_KERNEL, which is
+ * used to form an RID using the following scheme which seems to be
+ * have been inherited from Linux:
+ *
+ * a: bits 0-2: Region Number (0-7)
+ * b: 3-N: IA64_REGION_ID_KERNEL (0)
+ * c: N-23: reserved (0)
+ *
+ * N is defined by the platform.
+ *
+ * For EFI we use the following RID:
+ *
+ * a: bits 0-2: Region Number (0-7)
+ * e: bits 3-N: IA64_REGION_ID_KERNEL (1)
+ * f: bits N-53: reserved (0)
+ *
+ * + Only 0 is used as we only need one RID. Its not really important
+ * what this number is, so long as its between 0 and 7.
+ *
+ * The nice thing about this is that we are only using 4 bits of RID
+ * space, so it shouldn't have any chance of running into an adjacent
+ * small-block since small-blocks are at least 12 bits wide.
+ *
+ * It would actually be possible to just use a IA64_REGION_ID_KERNEL
+ * based RID for EFI use. The important thing is that it is in the 0th
+ * small block, and thus not available to domains. But as we have
+ * lots of space, its seems to be nice and clean to just use a separate
+ * RID for EFI.
+ *
+ * This can be trivially changed by updating the definition of XEN_EFI_RR.
+ *
+ * For reference, the RID is used to produce the value inserted
+ * in to a region register in the following way:
+ *
+ * A: bit 0: VHPT (0 = off, 1 = on)
+ * B: bit 1: reserved (0)
+ * C: bits 2-7: log 2 page_size
+ * D: bits 8-N: RID
+ * E: bits N-53: reserved (0)
+ */
+
+#define XEN_EFI_RR_ENTER(rr6, rr7) do { \
+ rr6 = ia64_get_rr(6UL << 61); \
+ rr7 = ia64_get_rr(7UL << 61); \
+ set_one_rr_efi(6UL << 61, XEN_EFI_RR); \
+ set_one_rr_efi(7UL << 61, XEN_EFI_RR); \
+} while (0)
+
+#define XEN_EFI_RR_LEAVE(rr6, rr7) do { \
+ set_one_rr_efi(6UL << 61, rr6); \
+ set_one_rr_efi(7UL << 61, rr7); \
+} while (0)
+
+#else
+/* Just use rr6 and rr7 in a dummy fashion here to get
+ * rid of compiler warnings - a better solution should
+ * be found if this code is ever actually used */
+#define XEN_EFI_RR_ENTER(rr6, rr7) do { rr6 = 0; rr7 = 0; } while (0)
+#define XEN_EFI_RR_LEAVE(rr6, rr7) do {} while (0)
+#endif /* XEN */
+
+#define XEN_EFI_RR_DECLARE(rr6, rr7) unsigned long rr6, rr7;
+
+#endif /* !__ASSEMBLY__ */
+
+#ifdef XEN
+#include <asm/mmu_context.h> /* For IA64_REGION_ID_EFI and ia64_rid() */
+#include <asm/pgtable.h> /* IA64_GRANULE_SHIFT */
+#define XEN_EFI_REGION_NO __IA64_UL_CONST(0)
+#define XEN_EFI_RR ((ia64_rid(XEN_IA64_REGION_ID_EFI, \
+ XEN_EFI_REGION_NO) << 8) | \
+ (IA64_GRANULE_SHIFT << 2))
+#endif /* XEN */
+
#endif /* _LINUX_EFI_H */
Index: xen-unstable.hg/xen/include/asm-ia64/mmu_context.h
===================================================================
--- xen-unstable.hg.orig/xen/include/asm-ia64/mmu_context.h 2008-07-15
09:48:25.000000000 +1000
+++ xen-unstable.hg/xen/include/asm-ia64/mmu_context.h 2008-07-15
09:48:27.000000000 +1000
@@ -3,6 +3,7 @@
//dummy file to resolve non-arch-indep include
#ifdef XEN
#define IA64_REGION_ID_KERNEL 0
+#define XEN_IA64_REGION_ID_EFI 1
#define ia64_rid(ctx,addr) (((ctx) << 3) | (addr >> 61))
#ifndef __ASSEMBLY__
--
--
Horms
_______________________________________________
Xen-ia64-devel mailing list
Xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-ia64-devel
|
Home