WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-ia64-devel

[Xen-ia64-devel] Re: Why do you set xen's driver "m"?

>On Fri, 2006-08-04 at 13:36 +0900, Akio Takebe wrote:
>> Hi, Juan
>> 
>> Thank you for your comments.
>> I can boot domU with the following modprobe.conf.
>> >    alias scsi_hostadapter xenblk
>> 
>> But I have some ide errors.
>> After I add extra = 'ide0=noprobe ide1=noprobe ide2=noprobe ide3=noprobe 
>> ide4=noprobe' into domU's config, ide errors are not occurred.
>
>I don't get them.  Could you post a log, and I will add that ide line to
>the kernel rpm :p
>
>Later, Juan.
Hi, Juan

The below is the boot log w/o ideX=noprobe.

[root@tiger111 linux-2.6-xen-fedora.0802]# xm create /xen/conf/domU.conf -c
Using config file "/xen/conf/domU.conf".
Started domain paravm1
Dentry cache hash table entries: 65536 (order: 5, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 4, 262144 bytes) 
Software IO TLB disabled                                      
Memory: 240640k/393216k available (5832k code, 152368k reserved, 4032k data, 
272k init)
McKinley Errata 9 workaround not needed; disabling it                           
       
register RESCHEDULE_VECTOR (RESCHED0) to xen irq (256)
register IPI_VECTOR (IPI0) to xen irq (257)           
Percpu irq 238 is unsupported by xen!      
register VIRQ_ITC (timer0) to xen irq (258)
Security Framework v1.0.0 initialized      
SELinux:  Initializing.              
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary                            
Mount-cache hash table entries: 1024   
ACPI: Core revision 20060707        
Boot processor id 0x0/0x0   
SMP mode deactivated.    
Brought up 1 CPUs    
Total of 1 processors activated (2236.41 BogoMIPS).
migration_cost=0                                   
checking if image is initramfs... it is
Freeing initrd memory: 6416kB freed    
DMI not present or invalid.        
grant table at e000010000000000
Grant table initialized        
NET: Registered protocol family 16
ACPI: bus type pci registered     
Brought up 1 CPUs            
ACPI: SCI (ACPI GSI 0) not registered
ACPI: Interpreter enabled            
ACPI: Using IOSAPIC for interrupt routing
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init                              
pnp: PnP ACPI: found 0 devices
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs 
usbcore: registered new driver hub  
NET: Registered protocol family 2 
IP route cache hash table entries: 4096 (order: 1, 32768 bytes)
TCP established hash table entries: 16384 (order: 5, 524288 bytes)
TCP bind hash table entries: 8192 (order: 4, 262144 bytes)        
TCP: Hash tables configured (established 16384 bind 8192) 
TCP reno registered                                      
perfmon: version 2.0 IRQ 238
perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits)
PAL Information Facility v0.5                                          
perfmon: added sampling format default_format
perfmon_default_smpl: default_format v2.0 registered
audit: initializing netlink socket (disabled)       
audit(1154659468.196:1): initialized         
VFS: Disk quotas dquot_6.5.1        
Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
SELinux:  Registering netfilter hooks                      
Initializing Cryptographic API       
io scheduler noop registered  
io scheduler anticipatory registered
io scheduler deadline registered    
io scheduler cfq registered (default)
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not 
present [20060707]
ACPI: Getting cpuindex for acpiid 0x1                                           
              
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not 
present [20060707]
ACPI: Getting cpuindex for acpiid 0x2                                           
              
EFI Time Services Driver v0.4        
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as tty1                    
Event-channel device installed.                   
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0x08)                  
hda: IRQ probe failed (0xfffffffffffffffe)               
hda: probing with STATUS(0xa1) instead of ALTSTATUS(0x08)
hda: IRQ probe failed (0xfffffffffffffffe)               
hda: no response (status = 0xa1), resetting drive
hda: IRQ probe failed (0xfffffffffffffffe)       
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0x08)
hdb: IRQ probe failed (0xfffffffffffffffe)               
hdb: probing with STATUS(0xa1) instead of ALTSTATUS(0x08)
hdb: IRQ probe failed (0xfffffffffffffffe)               
hdb: no response (status = 0xa1), resetting drive
hdb: IRQ probe failed (0xfffffffffffffffe)       
hdc: probing with STATUS(0xa1) instead of ALTSTATUS(0x08)
hdc: IRQ probe failed (0xfffffffffffffffe)               
hdc: probing with STATUS(0xa1) instead of ALTSTATUS(0x08)
hdc: IRQ probe failed (0xfffffffffffffffe)               
hdc: no response (status = 0xa1), resetting drive
hdc: IRQ probe failed (0xfffffffffffffffe)       
hdd: probing with STATUS(0xa1) instead of ALTSTATUS(0x08)
hdd: IRQ probe failed (0xfffffffffffffffe)               
hdd: probing with STATUS(0xa1) instead of ALTSTATUS(0x08)
hdd: IRQ probe failed (0xfffffffffffffffe)               
hdd: no response (status = 0xa1), resetting drive
hdd: IRQ probe failed (0xfffffffffffffffe)       
hde: probing with STATUS(0xa1) instead of ALTSTATUS(0x08)
hde: IRQ probe failed (0xfffffffffffffffe)               
hde: probing with STATUS(0xa1) instead of ALTSTATUS(0x08)
hde: IRQ probe failed (0xfffffffffffffffe)               
hde: no response (status = 0xa1), resetting drive
hde: IRQ probe failed (0xfffffffffffffffe)       
hdf: probing with STATUS(0xa1) instead of ALTSTATUS(0x08)
hdf: IRQ probe failed (0xfffffffffffffffe)               
hdf: probing with STATUS(0xa1) instead of ALTSTATUS(0x08)
hdf: IRQ probe failed (0xfffffffffffffffe)               
hdf: no response (status = 0xa1), resetting drive
hdf: IRQ probe failed (0xfffffffffffffffe)       
hdg: probing with STATUS(0xa1) instead of ALTSTATUS(0x08)
hdg: IRQ probe failed (0xfffffffffffffffe)               
hdg: probing with STATUS(0xa1) instead of ALTSTATUS(0x08)
hdg: IRQ probe failed (0xfffffffffffffffe)               
hdg: no response (status = 0xa1), resetting drive
hdg: IRQ probe failed (0xfffffffffffffffe)       
hdh: probing with STATUS(0xa1) instead of ALTSTATUS(0x08)
hdh: IRQ probe failed (0xfffffffffffffffe)               
hdh: probing with STATUS(0xa1) instead of ALTSTATUS(0x08)
hdh: IRQ probe failed (0xfffffffffffffffe)               
hdh: no response (status = 0xa1), resetting drive
hdh: IRQ probe failed (0xfffffffffffffffe)       
ide-floppy driver 0.99.newide             
usbcore: registered new driver libusual
usbcore: registered new driver hiddev  
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice           
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39                             
EFI Variables Facility v0.08 2004-May-17
efivars: get_next_variable: status=8000000000000003
TCP bic registered                                 
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
xen privcmd uses pseudo physical addr range [0x20000000, 0x3fffc000000] 
(4193728MB)
XENBUS: Device with no driver: device/vbd/2049                                  
   
Freeing unused kernel memory: 272kB freed     
Red Hat nash version 5.0.46 starting     
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
Setting up hotplug.
Creating block device nodes.
Loading xenblk.ko module
Loading jbd.ko module
Registering block device major 8
Loading ext3.ko module          
Loading scsi_mod.ko module
SCSI subsystem initialized
Loading sd_mod.ko module  
register_blkdev: cannot get major 8 for sd
Loading scsi_transport_spi.ko module      
Loading mptbase.ko module
Fusion MPT base driver 3.04.01
Copyright (c) 1999-2005 LSI Logic Corporation
Loading mptscsih.ko module                   
Loading mptspi.ko module
Fusion MPT SPI Host driver 3.04.01
Creating root device.             
Mounting root filesystem.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Setting up other filesystems.                      
Setting up new root fs
no fstab.sys, mounting internal defaults
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /proc/bus/usb
ERROR unmounting old /proc/bus/usb: No such file or directory
forcing unmount of /proc/bus/usb
unmounting old /sys
modprobe: FATAL: Could not load /lib/modules/2.6.18-rc3/modules.dep: No such 
file or directory

modprobe: FATAL: Could not load /lib/modules/2.6.18-rc3/modules.dep: No such 
file or directory

INIT: version 2.86 booting
                Welcome to Fedora Core
                Press 'I' to enter interactive startup.
Cannot access the Hardware Clock via any known method.
Use the --debug option to see the details of our search for an access method.
Setting clock  (localtime): Fri Aug  4 11:48:20 JST 2006 [  OK  ]
Starting udev: [  OK  ]
Setting hostname tiger156:  [  OK  ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda1 
/dev/sda1: clean, 80372/524288 files, 586652/1048576 blocks
[  OK  ]
Remounting root filesystem in read-write mode:  [  OK  ]
Mounting local filesystems:  [  OK  ]
Enabling local filesystem quotas:  [  OK  ]
Enabling /etc/fstab swaps:  [  OK  ]
INIT: Entering runlevel: 3
Entering non-interactive startup
Starting readahead_early:  Starting background readahead: [  OK  ]
[  OK  ]
Checking for hardware changes [  OK  ]
FATAL: Could not load /lib/modules/2.6.18-rc3/modules.dep: No such file or 
directory
CRITICAL : [ipv6_test] Kernel is not compiled with IPv6 support
Bringing up loopback interface:  [  OK  ]
Bringing up interface eth0:  Device eth0 does not seem to be present, delaying 
initialization.
[FAILED]
FATAL: Could not load /lib/modules/2.6.18-rc3/modules.dep: No such file or 
directory
CRITICAL : [ipv6_test] Kernel is not compiled with IPv6 support
Starting restorecond: [  OK  ]
Starting system logger: [  OK  ]
Starting kernel logger: [  OK  ]
Starting irqbalance: [  OK  ]
Starting portmap: [  OK  ]
Starting RPC idmapd: FATAL: Could not load /lib/modules/2.6.18-rc3/modules.dep: 
No such file or directory
Starting system message bus: [  OK  ]
Can't open RFCOMM control socket: Address family not supported by protocol

Starting hidd: Can't open HIDP control socket: Address family not supported by 
protocol
[FAILED]
Loading autofs4: [FAILED]
Starting smartd: [  OK  ]
Starting acpi daemon: [  OK  ]
Starting cups: [  OK  ]
Starting sshd: [  OK  ]
Starting vsftpd for vsftpd: [  OK  ]
Starting console mouse services: O0o.oops(): [console.c(83)]: Opening console 
failed.
[FAILED]
Starting crond: [  OK  ]
Starting xfs: [  OK  ]
Starting VNC server: no displays configured [  OK  ]
Starting anacron: [  OK  ]
Starting atd: [  OK  ]
Starting Avahi daemon: [  OK  ]
Starting HAL daemon: hald(1060): unaligned access to 0x60000fffff08761c, 
ip=0x2000000000506670
hald(1060): unaligned access to 0x60000fffff08761c, ip=0x2000000000506561       
              
[  OK  ]                                                                 

Fedora Core release 5.90 (Test)
Kernel 2.6.18-rc3 on an ia64

tiger156 login:


Best Regards,

Akio Takebe


_______________________________________________
Xen-ia64-devel mailing list
Xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-ia64-devel

<Prev in Thread] Current Thread [Next in Thread>