3 files changed, 669 insertions(+)
arch/ia64/kernel/gate.S | 376 +++++++++++++++++++++++++++++++++++++++++++
arch/ia64/kernel/gate.lds.S | 96 ++++++++++
arch/ia64/kernel/patch.c | 197 ++++++++++++++++++++++
# HG changeset patch
# User agriffis@xxxxxxxxxxxxxxx
# Node ID 489de0be169cc96a41105f8cb9046be740a9a706
# Parent 61b9455653982d901cac92052c30099eeffddd39
Add files which went lost in a merge goof
Signed-off-by: Aron Griffis <aron@xxxxxx>
diff -r 61b945565398 -r 489de0be169c arch/ia64/kernel/gate.S
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/arch/ia64/kernel/gate.S Thu Jul 27 00:09:52 2006 -0400
@@ -0,0 +1,376 @@
+/*
+ * This file contains the code that gets mapped at the upper end of each
task's text
+ * region. For now, it contains the signal trampoline code only.
+ *
+ * Copyright (C) 1999-2003 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@xxxxxxxxxx>
+ */
+
+#include <linux/config.h>
+
+#include <asm/asmmacro.h>
+#include <asm/errno.h>
+#include <asm/asm-offsets.h>
+#include <asm/sigcontext.h>
+#include <asm/system.h>
+#include <asm/unistd.h>
+
+/*
+ * We can't easily refer to symbols inside the kernel. To avoid full runtime
relocation,
+ * complications with the linker (which likes to create PLT stubs for branches
+ * to targets outside the shared object) and to avoid multi-phase kernel
builds, we
+ * simply create minimalistic "patch lists" in special ELF sections.
+ */
+ .section ".data.patch.fsyscall_table", "a"
+ .previous
+#define LOAD_FSYSCALL_TABLE(reg) \
+[1:] movl reg=0; \
+ .xdata4 ".data.patch.fsyscall_table", 1b-.
+
+ .section ".data.patch.brl_fsys_bubble_down", "a"
+ .previous
+#define BRL_COND_FSYS_BUBBLE_DOWN(pr) \
+[1:](pr)brl.cond.sptk 0; \
+ .xdata4 ".data.patch.brl_fsys_bubble_down", 1b-.
+
+GLOBAL_ENTRY(__kernel_syscall_via_break)
+ .prologue
+ .altrp b6
+ .body
+ /*
+ * Note: for (fast) syscall restart to work, the break instruction must
be
+ * the first one in the bundle addressed by syscall_via_break.
+ */
+{ .mib
+ break 0x100000
+ nop.i 0
+ br.ret.sptk.many b6
+}
+END(__kernel_syscall_via_break)
+
+/*
+ * On entry:
+ * r11 = saved ar.pfs
+ * r15 = system call #
+ * b0 = saved return address
+ * b6 = return address
+ * On exit:
+ * r11 = saved ar.pfs
+ * r15 = system call #
+ * b0 = saved return address
+ * all other "scratch" registers: undefined
+ * all "preserved" registers: same as on entry
+ */
+
+GLOBAL_ENTRY(__kernel_syscall_via_epc)
+ .prologue
+ .altrp b6
+ .body
+{
+ /*
+ * Note: the kernel cannot assume that the first two instructions in
this
+ * bundle get executed. The remaining code must be safe even if
+ * they do not get executed.
+ */
+ adds r17=-1024,r15 // A
+ mov r10=0 // A default to successful
syscall execution
+ epc // B causes split-issue
+}
+ ;;
+ rsm psr.be | psr.i // M2 (5 cyc to srlz.d)
+ LOAD_FSYSCALL_TABLE(r14) // X
+ ;;
+ mov r16=IA64_KR(CURRENT) // M2 (12 cyc)
+ shladd r18=r17,3,r14 // A
+ mov r19=NR_syscalls-1 // A
+ ;;
+ lfetch [r18] // M0|1
+ mov r29=psr // M2 (12 cyc)
+ // If r17 is a NaT, p6 will be zero
+ cmp.geu p6,p7=r19,r17 // A (sysnr > 0 && sysnr <
1024+NR_syscalls)?
+ ;;
+ mov r21=ar.fpsr // M2 (12 cyc)
+ tnat.nz p10,p9=r15 // I0
+ mov.i r26=ar.pfs // I0 (would stall anyhow due
to srlz.d...)
+ ;;
+ srlz.d // M0 (forces split-issue)
ensure PSR.BE==0
+(p6) ld8 r18=[r18] // M0|1
+ nop.i 0
+ ;;
+ nop.m 0
+(p6) tbit.z.unc p8,p0=r18,0 // I0 (dual-issues with "mov
b7=r18"!)
+ nop.i 0
+ ;;
+(p8) ssm psr.i
+(p6) mov b7=r18 // I0
+(p8) br.dptk.many b7 // B
+
+ mov r27=ar.rsc // M2 (12 cyc)
+/*
+ * brl.cond doesn't work as intended because the linker would convert this
branch
+ * into a branch to a PLT. Perhaps there will be a way to avoid this with some
+ * future version of the linker. In the meantime, we just use an indirect
branch
+ * instead.
+ */
+#ifdef CONFIG_ITANIUM
+(p6) add r14=-8,r14 // r14 <- addr of
fsys_bubble_down entry
+ ;;
+(p6) ld8 r14=[r14] // r14 <- fsys_bubble_down
+ ;;
+(p6) mov b7=r14
+(p6) br.sptk.many b7
+#else
+ BRL_COND_FSYS_BUBBLE_DOWN(p6)
+#endif
+ ssm psr.i
+ mov r10=-1
+(p10) mov r8=EINVAL
+(p9) mov r8=ENOSYS
+ FSYS_RETURN
+END(__kernel_syscall_via_epc)
+
+# define ARG0_OFF (16 + IA64_SIGFRAME_ARG0_OFFSET)
+# define ARG1_OFF (16 + IA64_SIGFRAME_ARG1_OFFSET)
+# define ARG2_OFF (16 + IA64_SIGFRAME_ARG2_OFFSET)
+# define SIGHANDLER_OFF (16 + IA64_SIGFRAME_HANDLER_OFFSET)
+# define SIGCONTEXT_OFF (16 + IA64_SIGFRAME_SIGCONTEXT_OFFSET)
+
+# define FLAGS_OFF IA64_SIGCONTEXT_FLAGS_OFFSET
+# define CFM_OFF IA64_SIGCONTEXT_CFM_OFFSET
+# define FR6_OFF IA64_SIGCONTEXT_FR6_OFFSET
+# define BSP_OFF IA64_SIGCONTEXT_AR_BSP_OFFSET
+# define RNAT_OFF IA64_SIGCONTEXT_AR_RNAT_OFFSET
+# define UNAT_OFF IA64_SIGCONTEXT_AR_UNAT_OFFSET
+# define FPSR_OFF IA64_SIGCONTEXT_AR_FPSR_OFFSET
+# define PR_OFF IA64_SIGCONTEXT_PR_OFFSET
+# define RP_OFF IA64_SIGCONTEXT_IP_OFFSET
+# define SP_OFF IA64_SIGCONTEXT_R12_OFFSET
+# define RBS_BASE_OFF IA64_SIGCONTEXT_RBS_BASE_OFFSET
+# define LOADRS_OFF IA64_SIGCONTEXT_LOADRS_OFFSET
+# define base0 r2
+# define base1 r3
+ /*
+ * When we get here, the memory stack looks like this:
+ *
+ * +===============================+
+ * | |
+ * // struct sigframe //
+ * | |
+ * +-------------------------------+ <-- sp+16
+ * | 16 byte of scratch |
+ * | space |
+ * +-------------------------------+ <-- sp
+ *
+ * The register stack looks _exactly_ the way it looked at the time the
signal
+ * occurred. In other words, we're treading on a potential mine-field:
each
+ * incoming general register may be a NaT value (including sp, in which
case the
+ * process ends up dying with a SIGSEGV).
+ *
+ * The first thing need to do is a cover to get the registers onto the
backing
+ * store. Once that is done, we invoke the signal handler which may
modify some
+ * of the machine state. After returning from the signal handler, we
return
+ * control to the previous context by executing a sigreturn system
call. A signal
+ * handler may call the rt_sigreturn() function to directly return to a
given
+ * sigcontext. However, the user-level sigreturn() needs to do much
more than
+ * calling the rt_sigreturn() system call as it needs to unwind the
stack to
+ * restore preserved registers that may have been saved on the signal
handler's
+ * call stack.
+ */
+
+#define SIGTRAMP_SAVES
\
+ .unwabi 3, 's'; /* mark this as a sigtramp handler (saves
scratch regs) */ \
+ .unwabi @svr4, 's'; /* backwards compatibility with old unwinders
(remove in v2.7) */ \
+ .savesp ar.unat, UNAT_OFF+SIGCONTEXT_OFF;
\
+ .savesp ar.fpsr, FPSR_OFF+SIGCONTEXT_OFF;
\
+ .savesp pr, PR_OFF+SIGCONTEXT_OFF;
\
+ .savesp rp, RP_OFF+SIGCONTEXT_OFF;
\
+ .savesp ar.pfs, CFM_OFF+SIGCONTEXT_OFF;
\
+ .vframesp SP_OFF+SIGCONTEXT_OFF
+
+GLOBAL_ENTRY(__kernel_sigtramp)
+ // describe the state that is active when we get here:
+ .prologue
+ SIGTRAMP_SAVES
+ .body
+
+ .label_state 1
+
+ adds base0=SIGHANDLER_OFF,sp
+ adds base1=RBS_BASE_OFF+SIGCONTEXT_OFF,sp
+ br.call.sptk.many rp=1f
+1:
+ ld8 r17=[base0],(ARG0_OFF-SIGHANDLER_OFF) // get pointer to
signal handler's plabel
+ ld8 r15=[base1] // get address of new
RBS base (or NULL)
+ cover // push args in interrupted frame onto
backing store
+ ;;
+ cmp.ne p1,p0=r15,r0 // do we need to switch rbs? (note: pr
is saved by kernel)
+ mov.m r9=ar.bsp // fetch ar.bsp
+ .spillsp.p p1, ar.rnat, RNAT_OFF+SIGCONTEXT_OFF
+(p1) br.cond.spnt setup_rbs // yup -> (clobbers p8, r14-r16, and
r18-r20)
+back_from_setup_rbs:
+ alloc r8=ar.pfs,0,0,3,0
+ ld8 out0=[base0],16 // load arg0 (signum)
+ adds base1=(ARG1_OFF-(RBS_BASE_OFF+SIGCONTEXT_OFF)),base1
+ ;;
+ ld8 out1=[base1] // load arg1 (siginfop)
+ ld8 r10=[r17],8 // get signal handler entry point
+ ;;
+ ld8 out2=[base0] // load arg2 (sigcontextp)
+ ld8 gp=[r17] // get signal handler's global pointer
+ adds base0=(BSP_OFF+SIGCONTEXT_OFF),sp
+ ;;
+ .spillsp ar.bsp, BSP_OFF+SIGCONTEXT_OFF
+ st8 [base0]=r9 // save sc_ar_bsp
+ adds base0=(FR6_OFF+SIGCONTEXT_OFF),sp
+ adds base1=(FR6_OFF+16+SIGCONTEXT_OFF),sp
+ ;;
+ stf.spill [base0]=f6,32
+ stf.spill [base1]=f7,32
+ ;;
+ stf.spill [base0]=f8,32
+ stf.spill [base1]=f9,32
+ mov b6=r10
+ ;;
+ stf.spill [base0]=f10,32
+ stf.spill [base1]=f11,32
+ ;;
+ stf.spill [base0]=f12,32
+ stf.spill [base1]=f13,32
+ ;;
+ stf.spill [base0]=f14,32
+ stf.spill [base1]=f15,32
+ br.call.sptk.many rp=b6 // call the signal handler
+.ret0: adds base0=(BSP_OFF+SIGCONTEXT_OFF),sp
+ ;;
+ ld8 r15=[base0] // fetch sc_ar_bsp
+ mov r14=ar.bsp
+ ;;
+ cmp.ne p1,p0=r14,r15 // do we need to restore the
rbs?
+(p1) br.cond.spnt restore_rbs // yup -> (clobbers r14-r18, f6
& f7)
+ ;;
+back_from_restore_rbs:
+ adds base0=(FR6_OFF+SIGCONTEXT_OFF),sp
+ adds base1=(FR6_OFF+16+SIGCONTEXT_OFF),sp
+ ;;
+ ldf.fill f6=[base0],32
+ ldf.fill f7=[base1],32
+ ;;
+ ldf.fill f8=[base0],32
+ ldf.fill f9=[base1],32
+ ;;
+ ldf.fill f10=[base0],32
+ ldf.fill f11=[base1],32
+ ;;
+ ldf.fill f12=[base0],32
+ ldf.fill f13=[base1],32
+ ;;
+ ldf.fill f14=[base0],32
+ ldf.fill f15=[base1],32
+ mov r15=__NR_rt_sigreturn
+ .restore sp // pop .prologue
+ break __BREAK_SYSCALL
+
+ .prologue
+ SIGTRAMP_SAVES
+setup_rbs:
+ mov ar.rsc=0 // put RSE into enforced lazy
mode
+ ;;
+ .save ar.rnat, r19
+ mov r19=ar.rnat // save RNaT before switching
backing store area
+ adds r14=(RNAT_OFF+SIGCONTEXT_OFF),sp
+
+ mov r18=ar.bspstore
+ mov ar.bspstore=r15 // switch over to new register
backing store area
+ ;;
+
+ .spillsp ar.rnat, RNAT_OFF+SIGCONTEXT_OFF
+ st8 [r14]=r19 // save sc_ar_rnat
+ .body
+ mov.m r16=ar.bsp // sc_loadrs <- (new bsp - new
bspstore) << 16
+ adds r14=(LOADRS_OFF+SIGCONTEXT_OFF),sp
+ ;;
+ invala
+ sub r15=r16,r15
+ extr.u r20=r18,3,6
+ ;;
+ mov ar.rsc=0xf // set RSE into eager mode, pl 3
+ cmp.eq p8,p0=63,r20
+ shl r15=r15,16
+ ;;
+ st8 [r14]=r15 // save sc_loadrs
+(p8) st8 [r18]=r19 // if bspstore points at RNaT slot, store RNaT
there now
+ .restore sp // pop .prologue
+ br.cond.sptk back_from_setup_rbs
+
+ .prologue
+ SIGTRAMP_SAVES
+ .spillsp ar.rnat, RNAT_OFF+SIGCONTEXT_OFF
+ .body
+restore_rbs:
+ // On input:
+ // r14 = bsp1 (bsp at the time of return from signal handler)
+ // r15 = bsp0 (bsp at the time the signal occurred)
+ //
+ // Here, we need to calculate bspstore0, the value that ar.bspstore
needs
+ // to be set to, based on bsp0 and the size of the dirty partition on
+ // the alternate stack (sc_loadrs >> 16). This can be done with the
+ // following algorithm:
+ //
+ // bspstore0 = rse_skip_regs(bsp0, -rse_num_regs(bsp1 - (loadrs >>
19), bsp1));
+ //
+ // This is what the code below does.
+ //
+ alloc r2=ar.pfs,0,0,0,0 // alloc null frame
+ adds r16=(LOADRS_OFF+SIGCONTEXT_OFF),sp
+ adds r18=(RNAT_OFF+SIGCONTEXT_OFF),sp
+ ;;
+ ld8 r17=[r16]
+ ld8 r16=[r18] // get new rnat
+ extr.u r18=r15,3,6 // r18 <- rse_slot_num(bsp0)
+ ;;
+ mov ar.rsc=r17 // put RSE into enforced lazy mode
+ shr.u r17=r17,16
+ ;;
+ sub r14=r14,r17 // r14 (bspstore1) <- bsp1 - (sc_loadrs >> 16)
+ shr.u r17=r17,3 // r17 <- (sc_loadrs >> 19)
+ ;;
+ loadrs // restore dirty partition
+ extr.u r14=r14,3,6 // r14 <- rse_slot_num(bspstore1)
+ ;;
+ add r14=r14,r17 // r14 <- rse_slot_num(bspstore1) + (sc_loadrs
>> 19)
+ ;;
+ shr.u r14=r14,6 // r14 <- (rse_slot_num(bspstore1) + (sc_loadrs
>> 19))/0x40
+ ;;
+ sub r14=r14,r17 // r14 <- -rse_num_regs(bspstore1, bsp1)
+ movl r17=0x8208208208208209
+ ;;
+ add r18=r18,r14 // r18 (delta) <- rse_slot_num(bsp0) -
rse_num_regs(bspstore1,bsp1)
+ setf.sig f7=r17
+ cmp.lt p7,p0=r14,r0 // p7 <- (r14 < 0)?
+ ;;
+(p7) adds r18=-62,r18 // delta -= 62
+ ;;
+ setf.sig f6=r18
+ ;;
+ xmpy.h f6=f6,f7
+ ;;
+ getf.sig r17=f6
+ ;;
+ add r17=r17,r18
+ shr r18=r18,63
+ ;;
+ shr r17=r17,5
+ ;;
+ sub r17=r17,r18 // r17 = delta/63
+ ;;
+ add r17=r14,r17 // r17 <- delta/63 - rse_num_regs(bspstore1,
bsp1)
+ ;;
+ shladd r15=r17,3,r15 // r15 <- bsp0 + 8*(delta/63 -
rse_num_regs(bspstore1, bsp1))
+ ;;
+ mov ar.bspstore=r15 // switch back to old register
backing store area
+ ;;
+ mov ar.rnat=r16 // restore RNaT
+ mov ar.rsc=0xf // (will be restored later on
from sc_ar_rsc)
+ // invala not necessary as that will happen when returning to user-mode
+ br.cond.sptk back_from_restore_rbs
+END(__kernel_sigtramp)
diff -r 61b945565398 -r 489de0be169c arch/ia64/kernel/gate.lds.S
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/arch/ia64/kernel/gate.lds.S Thu Jul 27 00:09:52 2006 -0400
@@ -0,0 +1,96 @@
+/*
+ * Linker script for gate DSO. The gate pages are an ELF shared object
prelinked to its
+ * virtual address, with only one read-only segment and one execute-only
segment (both fit
+ * in one page). This script controls its layout.
+ */
+
+#include <linux/config.h>
+
+#include <asm/system.h>
+
+SECTIONS
+{
+ . = GATE_ADDR + SIZEOF_HEADERS;
+
+ .hash : { *(.hash) }
:readable
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .gnu.version : { *(.gnu.version) }
+ .gnu.version_d : { *(.gnu.version_d) }
+ .gnu.version_r : { *(.gnu.version_r) }
+ .dynamic : { *(.dynamic) }
:readable :dynamic
+
+ /*
+ * This linker script is used both with -r and with -shared. For the
layouts to match,
+ * we need to skip more than enough space for the dynamic symbol table et
al. If this
+ * amount is insufficient, ld -shared will barf. Just increase it here.
+ */
+ . = GATE_ADDR + 0x500;
+
+ .data.patch : {
+ __start_gate_mckinley_e9_patchlist = .;
+ *(.data.patch.mckinley_e9)
+ __end_gate_mckinley_e9_patchlist = .;
+
+ __start_gate_vtop_patchlist = .;
+ *(.data.patch.vtop)
+ __end_gate_vtop_patchlist = .;
+
+ __start_gate_fsyscall_patchlist = .;
+ *(.data.patch.fsyscall_table)
+ __end_gate_fsyscall_patchlist = .;
+
+ __start_gate_brl_fsys_bubble_down_patchlist
= .;
+ *(.data.patch.brl_fsys_bubble_down)
+ __end_gate_brl_fsys_bubble_down_patchlist =
.;
+ }
:readable
+ .IA_64.unwind_info : { *(.IA_64.unwind_info*) }
+ .IA_64.unwind : { *(.IA_64.unwind*) }
:readable :unwind
+#ifdef HAVE_BUGGY_SEGREL
+ .text (GATE_ADDR + PAGE_SIZE) : { *(.text) *(.text.*) }
:readable
+#else
+ . = ALIGN (PERCPU_PAGE_SIZE) + (. & (PERCPU_PAGE_SIZE - 1));
+ .text : { *(.text) *(.text.*) }
:epc
+#endif
+
+ /DISCARD/ : {
+ *(.got.plt) *(.got)
+ *(.data .data.* .gnu.linkonce.d.*)
+ *(.dynbss)
+ *(.bss .bss.* .gnu.linkonce.b.*)
+ *(__ex_table)
+ *(__mca_table)
+ }
+}
+
+/*
+ * We must supply the ELF program headers explicitly to get just one
+ * PT_LOAD segment, and set the flags explicitly to make segments read-only.
+ */
+PHDRS
+{
+ readable PT_LOAD FILEHDR PHDRS FLAGS(4); /* PF_R */
+#ifndef HAVE_BUGGY_SEGREL
+ epc PT_LOAD FILEHDR PHDRS FLAGS(1); /* PF_X */
+#endif
+ dynamic PT_DYNAMIC FLAGS(4); /* PF_R */
+ unwind 0x70000001; /* PT_IA_64_UNWIND, but ld doesn't match the name */
+}
+
+/*
+ * This controls what symbols we export from the DSO.
+ */
+VERSION
+{
+ LINUX_2.5 {
+ global:
+ __kernel_syscall_via_break;
+ __kernel_syscall_via_epc;
+ __kernel_sigtramp;
+
+ local: *;
+ };
+}
+
+/* The ELF entry point can be used to set the AT_SYSINFO value. */
+ENTRY(__kernel_syscall_via_epc)
diff -r 61b945565398 -r 489de0be169c arch/ia64/kernel/patch.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/arch/ia64/kernel/patch.c Thu Jul 27 00:09:52 2006 -0400
@@ -0,0 +1,197 @@
+/*
+ * Instruction-patching support.
+ *
+ * Copyright (C) 2003 Hewlett-Packard Co
+ * David Mosberger-Tang <davidm@xxxxxxxxxx>
+ */
+#include <linux/init.h>
+#include <linux/string.h>
+
+#include <asm/patch.h>
+#include <asm/processor.h>
+#include <asm/sections.h>
+#include <asm/system.h>
+#include <asm/unistd.h>
+
+/*
+ * This was adapted from code written by Tony Luck:
+ *
+ * The 64-bit value in a "movl reg=value" is scattered between the two words
of the bundle
+ * like this:
+ *
+ * 6 6 5 4 3 2 1
+ * 3210987654321098765432109876543210987654321098765432109876543210
+ * ABBBBBBBBBBBBBBBBBBBBBBBCCCCCCCCCCCCCCCCCCDEEEEEFFFFFFFFFGGGGGGG
+ *
+ * CCCCCCCCCCCCCCCCCCxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
+ * xxxxAFFFFFFFFFEEEEEDxGGGGGGGxxxxxxxxxxxxxBBBBBBBBBBBBBBBBBBBBBBB
+ */
+static u64
+get_imm64 (u64 insn_addr)
+{
+ u64 *p = (u64 *) (insn_addr & -16); /* mask out slot number */
+
+ return ( (p[1] & 0x0800000000000000UL) << 4) | /*A*/
+ ((p[1] & 0x00000000007fffffUL) << 40) | /*B*/
+ ((p[0] & 0xffffc00000000000UL) >> 24) | /*C*/
+ ((p[1] & 0x0000100000000000UL) >> 23) | /*D*/
+ ((p[1] & 0x0003e00000000000UL) >> 29) | /*E*/
+ ((p[1] & 0x07fc000000000000UL) >> 43) | /*F*/
+ ((p[1] & 0x000007f000000000UL) >> 36); /*G*/
+}
+
+/* Patch instruction with "val" where "mask" has 1 bits. */
+void
+ia64_patch (u64 insn_addr, u64 mask, u64 val)
+{
+ u64 m0, m1, v0, v1, b0, b1, *b = (u64 *) (insn_addr & -16);
+# define insn_mask ((1UL << 41) - 1)
+ unsigned long shift;
+
+ b0 = b[0]; b1 = b[1];
+ shift = 5 + 41 * (insn_addr % 16); /* 5 bits of template, then 3 x
41-bit instructions */
+ if (shift >= 64) {
+ m1 = mask << (shift - 64);
+ v1 = val << (shift - 64);
+ } else {
+ m0 = mask << shift; m1 = mask >> (64 - shift);
+ v0 = val << shift; v1 = val >> (64 - shift);
+ b[0] = (b0 & ~m0) | (v0 & m0);
+ }
+ b[1] = (b1 & ~m1) | (v1 & m1);
+}
+
+void
+ia64_patch_imm64 (u64 insn_addr, u64 val)
+{
+ /* The assembler may generate offset pointing to either slot 1
+ or slot 2 for a long (2-slot) instruction, occupying slots 1
+ and 2. */
+ insn_addr &= -16UL;
+ ia64_patch(insn_addr + 2,
+ 0x01fffefe000UL, ( ((val & 0x8000000000000000UL) >> 27) /*
bit 63 -> 36 */
+ | ((val & 0x0000000000200000UL) << 0) /*
bit 21 -> 21 */
+ | ((val & 0x00000000001f0000UL) << 6) /*
bit 16 -> 22 */
+ | ((val & 0x000000000000ff80UL) << 20) /*
bit 7 -> 27 */
+ | ((val & 0x000000000000007fUL) << 13) /*
bit 0 -> 13 */));
+ ia64_patch(insn_addr + 1, 0x1ffffffffffUL, val >> 22);
+}
+
+void
+ia64_patch_imm60 (u64 insn_addr, u64 val)
+{
+ /* The assembler may generate offset pointing to either slot 1
+ or slot 2 for a long (2-slot) instruction, occupying slots 1
+ and 2. */
+ insn_addr &= -16UL;
+ ia64_patch(insn_addr + 2,
+ 0x011ffffe000UL, ( ((val & 0x0800000000000000UL) >> 23) /*
bit 59 -> 36 */
+ | ((val & 0x00000000000fffffUL) << 13) /*
bit 0 -> 13 */));
+ ia64_patch(insn_addr + 1, 0x1fffffffffcUL, val >> 18);
+}
+
+/*
+ * We need sometimes to load the physical address of a kernel
+ * object. Often we can convert the virtual address to physical
+ * at execution time, but sometimes (either for performance reasons
+ * or during error recovery) we cannot to this. Patch the marked
+ * bundles to load the physical address.
+ */
+void __init
+ia64_patch_vtop (unsigned long start, unsigned long end)
+{
+ s32 *offp = (s32 *) start;
+ u64 ip;
+
+ while (offp < (s32 *) end) {
+ ip = (u64) offp + *offp;
+
+ /* replace virtual address with corresponding physical address:
*/
+ ia64_patch_imm64(ip, ia64_tpa(get_imm64(ip)));
+ ia64_fc((void *) ip);
+ ++offp;
+ }
+ ia64_sync_i();
+ ia64_srlz_i();
+}
+
+void __init
+ia64_patch_mckinley_e9 (unsigned long start, unsigned long end)
+{
+ static int first_time = 1;
+ int need_workaround;
+ s32 *offp = (s32 *) start;
+ u64 *wp;
+
+ need_workaround = (local_cpu_data->family == 0x1f &&
local_cpu_data->model == 0);
+
+ if (first_time) {
+ first_time = 0;
+ if (need_workaround)
+ printk(KERN_INFO "Leaving McKinley Errata 9 workaround
enabled\n");
+ else
+ printk(KERN_INFO "McKinley Errata 9 workaround not
needed; "
+ "disabling it\n");
+ }
+ if (need_workaround)
+ return;
+
+ while (offp < (s32 *) end) {
+ wp = (u64 *) ia64_imva((char *) offp + *offp);
+ wp[0] = 0x0000000100000000UL; /* nop.m 0; nop.i 0; nop.i 0 */
+ wp[1] = 0x0004000000000200UL;
+ wp[2] = 0x0000000100000011UL; /* nop.m 0; nop.i 0;
br.ret.sptk.many b6 */
+ wp[3] = 0x0084006880000200UL;
+ ia64_fc(wp); ia64_fc(wp + 2);
+ ++offp;
+ }
+ ia64_sync_i();
+ ia64_srlz_i();
+}
+
+static void __init
+patch_fsyscall_table (unsigned long start, unsigned long end)
+{
+ extern unsigned long fsyscall_table[NR_syscalls];
+ s32 *offp = (s32 *) start;
+ u64 ip;
+
+ while (offp < (s32 *) end) {
+ ip = (u64) ia64_imva((char *) offp + *offp);
+ ia64_patch_imm64(ip, (u64) fsyscall_table);
+ ia64_fc((void *) ip);
+ ++offp;
+ }
+ ia64_sync_i();
+ ia64_srlz_i();
+}
+
+static void __init
+patch_brl_fsys_bubble_down (unsigned long start, unsigned long end)
+{
+ extern char fsys_bubble_down[];
+ s32 *offp = (s32 *) start;
+ u64 ip;
+
+ while (offp < (s32 *) end) {
+ ip = (u64) offp + *offp;
+ ia64_patch_imm60((u64) ia64_imva((void *) ip),
+ (u64) (fsys_bubble_down - (ip & -16)) / 16);
+ ia64_fc((void *) ip);
+ ++offp;
+ }
+ ia64_sync_i();
+ ia64_srlz_i();
+}
+
+void __init
+ia64_patch_gate (void)
+{
+# define START(name) ((unsigned long)
__start_gate_##name##_patchlist)
+# define END(name) ((unsigned long)__end_gate_##name##_patchlist)
+
+ patch_fsyscall_table(START(fsyscall), END(fsyscall));
+ patch_brl_fsys_bubble_down(START(brl_fsys_bubble_down),
END(brl_fsys_bubble_down));
+ ia64_patch_vtop(START(vtop), END(vtop));
+ ia64_patch_mckinley_e9(START(mckinley_e9), END(mckinley_e9));
+}
_______________________________________________
Xen-ia64-devel mailing list
Xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-ia64-devel
|
Home