Committed. Note that I removed the CONFIG_LOCALVERSION="xen"
as this is already added by higher level Xen build code and
results in a Linux version of "...-xen0xen".
Thanks,
Dan
> -----Original Message-----
> From: Zhang, Xiantao [mailto:xiantao.zhang@xxxxxxxxx]
> Sent: Tuesday, December 20, 2005 11:04 PM
> To: Magenheimer, Dan (HP Labs Fort Collins); Tian, Kevin;
> xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
> Subject: RE: [Xen-ia64-devel] RE: [PATCH]Allow different
> config file forxenlinux on same arch
>
> Hi Dan,
> Thanks for your support. I have booted Xen0
> successfully according to Akio's Knowhow, but it needs to
> compile Xen0 twice and need to run make menuconfig manually
> every time .So this is not the best solution to solve this
> issue. Lastly,I adopted your suggestion to make the generic
> one for tiger and ZX. Comparing xen0_defconfig_ia64 in
> xen-unstable with our xen0_defconfig_tiger, I found only
> several items not included in xen0_defconfig_ia64. Hence, I
> added them by "make menuconfig". Currently, we can boot Xen0
> with this candidate generic one. We haven't ZX box, so can
> you help me to validate it on ZX box? Thanks. If it is OK
> with ZX Box, we can use this one as generic configuration
> file for all IA64 machine.
> Best wishes!
> Thanks
> Zhang Xiantao
> CSD-OTC PRC Virtualization
> Intel (China) Limited
>
> -----Original Message-----
> From: Magenheimer, Dan (HP Labs Fort Collins)
> [mailto:dan.magenheimer@xxxxxx]
> Sent: 2005年12月19日 23:56
> To: Tian, Kevin; Zhang, Xiantao; xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
> Subject: RE: [Xen-ia64-devel] RE: [PATCH]Allow different
> config file forxenlinux on same arch
>
> I support the patch but I think it should be accepted
> and committed by someone in Cambridge or Xensource because
> it affects important common (and Xen/x86) build files.
> Try resubmitting it to xen-devel.
>
> However, I think the best answer is to figure out what's
> wrong in the generic config file and fix that.
>
> > -----Original Message-----
> > From: xen-ia64-devel-bounces@xxxxxxxxxxxxxxxxxxx
> > [mailto:xen-ia64-devel-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf
> > Of Tian, Kevin
> > Sent: Monday, December 19, 2005 2:10 AM
> > To: Zhang, Xiantao; xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
> > Subject: [Xen-ia64-devel] RE: [PATCH]Allow different config
> > file forxenlinux on same arch
> >
> > Hi, Dan,
> > Any comments upon this thread? We also posted the patch
> > to xen mailing list earlier, since it changes common part.
> > Previously the generic one was once checked in, but then
> > reversed back to ZX specific one. However customer is waiting
> > for specific configuration file to run on tiger box. So below
> > is another way to achieve it. If you agree with this
> > alternative, please help push it since it's a key step to let
> > XEN/IA64 deployed and experienced more widely. ;-)
> >
> > Thanks,
> > Kevin
> >
> > >-----Original Message-----
> > >From: Zhang, Xiantao
> > >Sent: 2005年12月19日 9:50
> > >To: xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
> > >Cc: Tian, Kevin
> > >Subject: [PATCH]Allow different config file for xenlinux
> on same arch
> > >
> > >Currently there is no generic configure file to compile
> > xenlinux on ia64, since there're
> > >several different system types like HP-ZX, DIG, etc. Current
> > Makefile can't meet this
> > >need and default one (xen0_defconfig_ia64) is only for HP-ZX
> > type. Hence, this
> > >patch can append an additional param to configuration file
> > name to differentiate
> > >system types when make.
> > >
> > >For example, we can use "make world XEN_SYSTYPE=dig" to
> > compile, and if a
> > >config file named as xen0_defconfig_ia64dig exists under
> > arch/xen/configs, it will be
> > >copied to override xen0_defconfig_ia64 before real
> > compilation.. If no value for this
> > >option, it use default configure file for their archs.
> > >
> > >Configuration file is not attached here. If this approach is
> > an agreed approach to
> > >solve such requirement, we will check in the config file in
> > another mail.
> > >
> > >Signed-off-by Zhang Xiantao <xiantao.zhang@xxxxxxxxx>
> > >Signed-off-by Tian Kevin <kevin.tian@xxxxxxxxx>
> > >
> > >diff -r 0255f48b757f Makefile
> > >--- a/Makefile Sun Dec 4 19:12:00 2005
> > >+++ b/Makefile Wed Dec 14 17:35:04 2005
> > >@@ -10,7 +10,7 @@
> > > # Export target architecture overrides to Xen and Linux sub-trees.
> > > ifneq ($(XEN_TARGET_ARCH),)
> > > SUBARCH := $(subst x86_32,i386,$(XEN_TARGET_ARCH))
> > >-export XEN_TARGET_ARCH SUBARCH
> > >+export XEN_TARGET_ARCH SUBARCH XEN_SYSTYPE
> > > endif
> > >
> > > # Default target must appear before any include lines
> > >diff -r 0255f48b757f buildconfigs/mk.linux-2.6-xen
> > >--- a/buildconfigs/mk.linux-2.6-xen Sun Dec 4 19:12:00 2005
> > >+++ b/buildconfigs/mk.linux-2.6-xen Wed Dec 14 17:35:04 2005
> > >@@ -30,7 +30,7 @@
> > > CONFIG_VERSION=$$(sed -ne 's/^EXTRAVERSION = //p'
> > >$(LINUX_DIR)/Makefile); \
> > > [ -r
> > >$(DESTDIR)/boot/config-$(LINUX_VER)$$CONFIG_VERSION-$(EXTRAVERSION)
> > > ] && \
> > > cp
> > >$(DESTDIR)/boot/config-$(LINUX_VER)$$CONFIG_VERSION-$(EXTRAVERSION)
> > >$(LINUX_DIR)/.config \
> > >- || cp
> > >$(LINUX_DIR)/arch/xen/configs/$(EXTRAVERSION)_defconfig_$(XEN
> > _TARGET_A
> > >RCH) \
> > >+ || cp
> > >$(LINUX_DIR)/arch/xen/configs/$(EXTRAVERSION)_defconfig_$(XEN
> > _TARGET_A
> > >RCH)$(XEN_SYSTYPE) \
> > > $(LINUX_DIR)/.config
> > > # See if we need to munge config to enable PAE
> > > $(MAKE) CONFIG_FILE=$(LINUX_DIR)/.config -f
> > buildconfigs/Rules.mk
> > >config-update-pae
> > >
> > >Zhang Xiantao
> > >CSD-OTC PRC Virtualization
> > >Intel (China) Limited
> >
> >
> > _______________________________________________
> > Xen-ia64-devel mailing list
> > Xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-ia64-devel
> >
>
_______________________________________________
Xen-ia64-devel mailing list
Xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-ia64-devel
|
Home