Essaye de vérifier ces points-là :
1- vérifie l'emplacement de ton fichier image
/imagesxen/suse10.img
2- dans le fstab de ta VM suse10, est-ce le système de fichiers
(reiserfs, ext3) qui correspond bien au formatage de ta VM suse10 qui
est bien spécifié et pas un autre ?
3- les modules correspondant à la version du noyau sont bien copiés
(j'ai l'impression que oui)
4- ta vm n'était pas montée en loopbak à ce moment-là ?
d'autres idées ?
2006/4/26, jimmypierre.rouen.france <jimmypierre.rouen.france@xxxxxxxxx>:
> Suse76:/imagesxen # xm create /etc/xen/suse10 -c
> Using config file "/etc/xen/suse10".
> Started domain suse10
> Linux version 2.6.13-15.8-xen (geeko@buildhost) (gcc version 4.0.2 20050901
> (prerelease) (SUSE Linux)) #1 SMP Tue Feb 7 11:07:24 UTC 2006
> BIOS-provided physical RAM map:
> Xen: 0000000000000000 - 0000000010000000 (usable)
> 0MB HIGHMEM available.
> 264MB LOWMEM available.
> ACPI in unprivileged domain disabled
> IRQ lockup detection disabled
> Built 1 zonelists
> Kernel command line: root=/dev/sda1 ro 5
> Initializing CPU#0
> PID hash table entries: 2048 (order: 11, 32768 bytes)
> Xen reported: 1007.282 MHz processor.
> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> Software IO TLB disabled
> vmalloc area: d1000000-fb7fe000, maxmem 34000000
> Memory: 249472k/270336k available (2362k kernel code, 12380k reserved, 829k
> data, 180k init, 0k highmem)
> Checking if this processor honours the WP bit even in supervisor mode... Ok.
> Security Framework v1.0.0 initialized
> SELinux: Disabled at boot.
> Mount-cache hash table entries: 512
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 256K (64 bytes/line)
> Enabling fast FPU save and restore... done.
> Checking 'hlt' instruction... disabled
> checking if image is initramfs... it is
> Freeing initrd memory: 4270k freed
> Brought up 1 CPUs
> NET: Registered protocol family 16
> Brought up 1 CPUs
> ACPI: Subsystem revision 20050408
> ACPI: Interpreter disabled.
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI: disabled
> xen_mem: Initialising balloon driver.
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
> report
> PCI: System does not support PCI
> PCI: System does not support PCI
> TC classifier action (bugs to netdev@xxxxxxxxxxxxxxx cc hadi@xxxxxxxxxx)
> Grant table initialized
> audit: initializing netlink socket (disabled)
> audit(1146070099.926:1): initialized
> Total HugeTLB memory allocated, 0
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> Initializing Cryptographic API
> vesafb: abort, cannot ioremap video memory 0x0 @ 0x0
> vesafb: probe of vesafb.0 failed with error -5
> PNP: No PS/2 controller found. Probing ports directly.
> i8042.c: No controller found.
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered
> RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
> loop: loaded (max 8 devices)
> Xen virtual console successfully installed as tty1
> Event-channel device installed.
> Successfully initialized TPM backend driver.
> Registering block device major 8
> netfront: Initialising virtual ethernet driver.
> xen_tpm_fr: Initialising the vTPM driver.
> mice: PS/2 mouse device common for all mice
> md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
> md: bitmap version 3.38
> NET: Registered protocol family 2
> IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
> TCP established hash table entries: 16384 (order: 5, 131072 bytes)
> TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
> TCP: Hash tables configured (established 16384 bind 16384)
> TCP reno registered
> NET: Registered protocol family 1
> NET: Registered protocol family 8
> NET: Registered protocol family 20
> Freeing unused kernel memory: 180k freed
> Starting udev
> Creating devices
> Loading ide-disk
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
> Loading sd_mod
> SCSI subsystem initialized
> register_blkdev: cannot get major 8 for sd
> Loading via82cxxx
> Loading aic7xxx
> Loading processor
> Loading thermal
> FATAL: Error inserting thermal
> (/lib/modules/2.6.13-15.8-xen/kernel/drivers/acpi/thermal.ko): No such
> device
> Loading fan
> FATAL: Error inserting fan
> (/lib/modules/2.6.13-15.8-xen/kernel/drivers/acpi/fan.ko): No such device
> Loading reiserfs
> Waiting for device /dev/sda1 to appear: ok
> rootfs: major=8 minor=1 devn=2049
> Mounting root /dev/sda1
> mount: No such device
> Kernel panic - not syncing: Attempted to kill init!
> _________________________
>
> Le fichier de config :
>
> suse76:/imagesxen # more /etc/xen/suse10
>
> kernel = "/boot/vmlinuz-2.6.13-15.8-xen"
> ramdisk = "/boot/initrd-2.6.13-15.8-xen"
> memory = 256
> name = "suse10"
> nics = 1
> vif = [ 'bridge=xenbr0' ]
> disk = [ 'file:/imagesxen/suse10.img,sda1,w' ]
> root = "/dev/sda1 ro"
> extra = "5"
> suse76:/imagesxen #
>
> Merci de votre aide.
>
> Bonne soirée
> Jimmy
>
>
> _______________________________________________
> Xen-fr mailing list
> Xen-fr@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-fr
>
_______________________________________________
Xen-fr mailing list
Xen-fr@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-fr
|
Home