[ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-xen-kali (root@kali) (gcc version 4.5.3 (Gentoo 4.5.3-r1 p1.0, pie-0.4.5) ) #3 SMP Fri Sep 9 23:25:46 CEST 2011 [ 0.000000] Command line: root=/dev/ram0 real_root=/dev/md0 init=/init intel_iommu=on [ 0.000000] Xen-provided machine memory map: [ 0.000000] BIOS: 0000000000000000 - 000000000009c000 (usable) [ 0.000000] BIOS: 000000000009c000 - 00000000000a0000 (reserved) [ 0.000000] BIOS: 00000000000e5000 - 0000000000100000 (reserved) [ 0.000000] BIOS: 0000000000100000 - 00000000bf780000 (usable) [ 0.000000] BIOS: 00000000bf780000 - 00000000bf798000 (ACPI data) [ 0.000000] BIOS: 00000000bf798000 - 00000000bf7dc000 (ACPI NVS) [ 0.000000] BIOS: 00000000bf7dc000 - 00000000c0000000 (reserved) [ 0.000000] BIOS: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS: 00000000fec8a000 - 00000000fec8b000 (reserved) [ 0.000000] BIOS: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS: 0000000100000000 - 0000000340000000 (usable) [ 0.000000] Xen-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 00000002ef4fb000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.5 present. [ 0.000000] DMI: System manufacturer System Product Name/P6T WS PRO, BIOS 1205 09/24/2010 [ 0.000000] last_pfn = 0x2ef4fb max_arch_pfn = 0x80000000 [ 0.000000] last_pfn = 0x100000 max_arch_pfn = 0x80000000 [ 0.000000] initial memory mapped : 0 - 00000000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000100000000 [ 0.000000] 0000000000 - 0100000000 page 4k [ 0.000000] kernel direct mapping tables up to 100000000 @ 16e5000-1eea000 [ 0.000000] init_memory_mapping: 0000000100000000-00000002ef4fb000 [ 0.000000] 0100000000 - 02ef4fb000 page 4k [ 0.000000] kernel direct mapping tables up to 2ef4fb000 @ 1eea000-3672000 [ 0.000000] RAMDISK: 02000000 - 0244a000 [ 0.000000] ACPI: RSDP 00000000000fb2c0 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000bf780100 00064 (v01 092410 XSDT1941 20100924 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000bf780290 000F4 (v03 092410 FACP1941 20100924 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000bf7804b0 0B119 (v01 A1095 A1095001 00000001 INTL 20060113) [ 0.000000] ACPI: FACS 00000000bf798000 00040 [ 0.000000] ACPI: APIC 00000000bf780390 000D8 (v01 092410 APIC1941 20100924 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000bf780470 0003C (v01 092410 OEMMCFG 20100924 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000bf798040 00072 (v01 092410 OEMB1941 20100924 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000bf78f4b0 00038 (v01 092410 OEMHPET 20100924 MSFT 00000097) [ 0.000000] ACPI: XMAR 00000000bf7980c0 00138 (v01 AMI OEMDMAR 00000001 MSFT 00000097) [ 0.000000] ACPI: OSFR 00000000bf78f4f0 000B0 (v01 092410 OEMOSFR 20100924 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000bf79c360 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x002ef4fb [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x002eecfb [ 0.000000] 0: 0x002ef4fb -> 0x002ef4fb [ 0.000000] On node 0 totalpages: 3075323 [ 0.000000] free_area_init_node: node 0, pgdat ffffffff815b5500, node_mem_map ffff8802e4897000 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4040 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 1030200 pages, LIFO batch:31 [ 0.000000] Normal zone: 27738 pages used for memmap [ 0.000000] Normal zone: 1999009 pages, LIFO batch:31 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x11] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x15] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled) [ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec8a000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 7, version 32, address 0xfec8a000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000) [ 0.000000] setup_percpu: NR_CPUS:12 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 18 pages/cpu @ffff8802e3002000 s41856 r8192 d23680 u73728 [ 0.000000] pcpu-alloc: s41856 r8192 d23680 u73728 alloc=18*4096 [ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07 [ 0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [ 0.000000] Swapping MFNs for PFN 15c1 and 2e3008 (MFN 3355c1 and 13c13) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3033249 [ 0.000000] Kernel command line: root=/dev/ram0 real_root=/dev/md0 init=/init intel_iommu=on [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Software IO TLB enabled: [ 0.000000] Aperture: 64 megabytes [ 0.000000] Address size: 27 bits [ 0.000000] Kernel range: ffff8802dd7fa000 - ffff8802e17fa000 [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Memory: 11981808k/12309484k available (4167k kernel code, 8192k absent, 319484k reserved, 1695k data, 376k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] nr_pirqs: 64 [ 0.000000] NR_IRQS:5376 nr_irqs:1088 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Xen reported: 3340.984 MHz processor. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [xvc-1] enabled [ 0.059996] Calibrating delay using timer specific routine.. 7040.49 BogoMIPS (lpj=3520248) [ 0.060093] pid_max: default: 32768 minimum: 301 [ 0.060163] Mount-cache hash table entries: 256 [ 0.060287] Initializing cgroup subsys blkio [ 0.060359] mce: CPU supports 9 MCE banks [ 0.060453] Freeing SMP alternatives: 12k freed [ 0.060505] ACPI: Core revision 20110112 [ 0.067478] Brought up 12 CPUs [ 0.067545] devtmpfs: initialized [ 0.067545] xor: automatically using best checksumming function: generic_sse [ 0.071996] generic_sse: 11216.000 MB/sec [ 0.072044] xor: using function: generic_sse (11216.000 MB/sec) [ 0.072123] NET: Registered protocol family 16 [ 0.072189] ACPI: bus type pci registered [ 0.072189] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.072189] PCI: not using MMCONFIG [ 0.072189] PCI: Using configuration type 1 for base access [ 0.075031] bio: create slab at 0 [ 0.092008] raid6: int64x1 3945 MB/s [ 0.109004] raid6: int64x2 3867 MB/s [ 0.125993] raid6: int64x4 3402 MB/s [ 0.143003] raid6: int64x8 3164 MB/s [ 0.159990] raid6: sse2x1 9707 MB/s [ 0.176989] raid6: sse2x2 11238 MB/s [ 0.193981] raid6: sse2x4 12945 MB/s [ 0.194030] raid6: using algorithm sse2x4 (12945 MB/s) [ 0.194596] ACPI: EC: Look up EC in DSDT [ 0.195378] ACPI: Executed 1 blocks of module-level executable AML code [ 0.223087] ACPI: SSDT 00000000bf798200 03978 (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 0.223490] ACPI: Dynamic OEM Table Load: [ 0.223594] ACPI: SSDT (null) 03978 (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 0.223859] ACPI: SSDT 00000000bf79bb80 007DD (v01 PmRef P001Cst 00003001 INTL 20060113) [ 0.224091] ACPI: Dynamic OEM Table Load: [ 0.224196] ACPI: SSDT (null) 007DD (v01 PmRef P001Cst 00003001 INTL 20060113) [ 0.228166] ACPI: Interpreter enabled [ 0.228216] ACPI: (supports S0 S5) [ 0.228323] ACPI: Using IOAPIC for interrupt routing [ 0.228397] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.229315] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.300038] ACPI: No dock devices found. [ 0.300088] HEST: Table not found. [ 0.300137] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.300293] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.300373] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.300373] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.300373] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.300373] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.300373] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] [ 0.300967] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff] [ 0.301051] pci 0000:00:00.0: [8086:3405] type 0 class 0x000600 [ 0.301118] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.301122] pci 0000:00:00.0: PME# disabled [ 0.301152] pci 0000:00:01.0: [8086:3408] type 1 class 0x000604 [ 0.301218] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.301222] pci 0000:00:01.0: PME# disabled [ 0.301252] pci 0000:00:03.0: [8086:340a] type 1 class 0x000604 [ 0.301318] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.301321] pci 0000:00:03.0: PME# disabled [ 0.301354] pci 0000:00:07.0: [8086:340e] type 1 class 0x000604 [ 0.301420] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.301423] pci 0000:00:07.0: PME# disabled [ 0.301461] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800 [ 0.301549] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800 [ 0.301637] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800 [ 0.301721] pci 0000:00:14.3: [8086:3438] type 0 class 0x000800 [ 0.301809] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03 [ 0.301869] pci 0000:00:1a.0: reg 20: [io 0xb800-0xb81f] [ 0.301928] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03 [ 0.301963] pci 0000:00:1a.1: reg 20: [io 0xb880-0xb89f] [ 0.301963] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03 [ 0.302018] pci 0000:00:1a.2: reg 20: [io 0xbc00-0xbc1f] [ 0.302091] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03 [ 0.302118] pci 0000:00:1a.7: reg 10: [mem 0xf7eff000-0xf7eff3ff] [ 0.302217] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.302222] pci 0000:00:1a.7: PME# disabled [ 0.302251] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403 [ 0.302271] pci 0000:00:1b.0: reg 10: [mem 0xf7ef8000-0xf7efbfff 64bit] [ 0.302348] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.302352] pci 0000:00:1b.0: PME# disabled [ 0.302377] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604 [ 0.302455] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.302459] pci 0000:00:1c.0: PME# disabled [ 0.302486] pci 0000:00:1c.1: [8086:3a42] type 1 class 0x000604 [ 0.302563] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.302567] pci 0000:00:1c.1: PME# disabled [ 0.302603] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03 [ 0.302663] pci 0000:00:1d.0: reg 20: [io 0xb080-0xb09f] [ 0.302721] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03 [ 0.302780] pci 0000:00:1d.1: reg 20: [io 0xb400-0xb41f] [ 0.302840] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03 [ 0.302899] pci 0000:00:1d.2: reg 20: [io 0xb480-0xb49f] [ 0.302963] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03 [ 0.302963] pci 0000:00:1d.7: reg 10: [mem 0xf7efe000-0xf7efe3ff] [ 0.303010] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.303015] pci 0000:00:1d.7: PME# disabled [ 0.303040] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.303119] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601 [ 0.303224] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.303297] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f) [ 0.303415] pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106 [ 0.303441] pci 0000:00:1f.2: reg 10: [io 0xac00-0xac07] [ 0.303452] pci 0000:00:1f.2: reg 14: [io 0xa880-0xa883] [ 0.303462] pci 0000:00:1f.2: reg 18: [io 0xa800-0xa807] [ 0.303472] pci 0000:00:1f.2: reg 1c: [io 0xa480-0xa483] [ 0.303483] pci 0000:00:1f.2: reg 20: [io 0xa400-0xa41f] [ 0.303493] pci 0000:00:1f.2: reg 24: [mem 0xf7efc000-0xf7efc7ff] [ 0.303540] pci 0000:00:1f.2: PME# supported from D3hot [ 0.303544] pci 0000:00:1f.2: PME# disabled [ 0.303565] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05 [ 0.303586] pci 0000:00:1f.3: reg 10: [mem 0xf7efd000-0xf7efd0ff 64bit] [ 0.303615] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] [ 0.303711] pci 0000:01:00.0: [1033:0125] type 1 class 0x000604 [ 0.303794] pci 0000:01:00.0: supports D1 [ 0.303795] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold [ 0.303800] pci 0000:01:00.0: PME# disabled [ 0.303831] pci 0000:01:00.1: [1033:0125] type 1 class 0x000604 [ 0.303856] pci 0000:01:00.1: reg 10: [mem 0xf7fffc00-0xf7fffc7f 64bit] [ 0.303919] pci 0000:01:00.1: supports D1 [ 0.303920] pci 0000:01:00.1: PME# supported from D0 D1 D3hot D3cold [ 0.303925] pci 0000:01:00.1: PME# disabled [ 0.303960] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.303963] pci 0000:00:01.0: PCI bridge to [bus 01-03] [ 0.303969] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.303972] pci 0000:00:01.0: bridge window [mem 0xf7f00000-0xf7ffffff] [ 0.303979] pci 0000:00:01.0: bridge window [mem 0xcff00000-0xcfffffff 64bit pref] [ 0.304081] pci 0000:01:00.0: PCI bridge to [bus 03-03] [ 0.304139] pci 0000:01:00.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.304144] pci 0000:01:00.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.304153] pci 0000:01:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.304269] pci 0000:01:00.1: PCI bridge to [bus 02-02] [ 0.304327] pci 0000:01:00.1: bridge window [io 0xf000-0x0000] (disabled) [ 0.304332] pci 0000:01:00.1: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.304340] pci 0000:01:00.1: bridge window [mem 0xcff00000-0xcfffffff 64bit pref] [ 0.304423] pci 0000:04:00.0: [10de:05e3] type 0 class 0x000300 [ 0.304436] pci 0000:04:00.0: reg 10: [mem 0xfa000000-0xfaffffff] [ 0.304451] pci 0000:04:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.304466] pci 0000:04:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit] [ 0.304477] pci 0000:04:00.0: reg 24: [io 0xcc00-0xcc7f] [ 0.304487] pci 0000:04:00.0: reg 30: [mem 0xfbb80000-0xfbbfffff pref] [ 0.305986] pci 0000:00:03.0: PCI bridge to [bus 04-04] [ 0.306057] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] [ 0.306061] pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbbfffff] [ 0.306067] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.306138] pci 0000:05:00.0: [12d8:e130] type 1 class 0x000604 [ 0.306212] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold [ 0.306217] pci 0000:05:00.0: PME# disabled [ 0.307984] pci 0000:00:07.0: PCI bridge to [bus 05-06] [ 0.308050] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff] [ 0.308054] pci 0000:00:07.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.308060] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.308124] pci 0000:06:00.0: [1095:3124] type 0 class 0x000104 [ 0.308155] pci 0000:06:00.0: reg 10: [mem 0xfbcffc00-0xfbcffc7f 64bit] [ 0.308174] pci 0000:06:00.0: reg 18: [mem 0xfbcf0000-0xfbcf7fff 64bit] [ 0.308186] pci 0000:06:00.0: reg 20: [io 0xdc00-0xdc0f] [ 0.308209] pci 0000:06:00.0: reg 30: [mem 0xfbc00000-0xfbc7ffff pref] [ 0.308241] pci 0000:06:00.0: supports D1 D2 [ 0.308302] pci 0000:05:00.0: PCI bridge to [bus 06-06] [ 0.308359] pci 0000:05:00.0: bridge window [io 0xd000-0xdfff] [ 0.308363] pci 0000:05:00.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.308370] pci 0000:05:00.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.308433] pci 0000:00:1c.0: PCI bridge to [bus 08-08] [ 0.308487] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.308491] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.308498] pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref] [ 0.308574] pci 0000:07:00.0: [10ec:8168] type 0 class 0x000200 [ 0.308594] pci 0000:07:00.0: reg 10: [io 0xe800-0xe8ff] [ 0.308629] pci 0000:07:00.0: reg 18: [mem 0xfbdff000-0xfbdfffff 64bit] [ 0.308651] pci 0000:07:00.0: reg 20: [mem 0xf6ef0000-0xf6efffff 64bit pref] [ 0.308666] pci 0000:07:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref] [ 0.308715] pci 0000:07:00.0: supports D1 D2 [ 0.308716] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.308721] pci 0000:07:00.0: PME# disabled [ 0.309991] pci 0000:00:1c.1: PCI bridge to [bus 07-07] [ 0.310056] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 0.310060] pci 0000:00:1c.1: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.310067] pci 0000:00:1c.1: bridge window [mem 0xf6e00000-0xf6efffff 64bit pref] [ 0.310117] pci 0000:09:04.0: [11c1:5811] type 0 class 0x000c00 [ 0.310139] pci 0000:09:04.0: reg 10: [mem 0xfbeff000-0xfbefffff] [ 0.310227] pci 0000:09:04.0: supports D1 D2 [ 0.310228] pci 0000:09:04.0: PME# supported from D0 D1 D2 D3hot [ 0.310233] pci 0000:09:04.0: PME# disabled [ 0.310284] pci 0000:00:1e.0: PCI bridge to [bus 09-09] (subtractive decode) [ 0.310341] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.310345] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.310352] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.310354] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.310356] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.310358] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.310360] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.310361] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode) [ 0.310363] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode) [ 0.310396] pci_bus 0000:00: on NUMA node 0 [ 0.310399] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.310582] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.310628] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.310651] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 0.310677] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT] [ 0.310699] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1.PXHA._PRT] [ 0.310736] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT] [ 0.310758] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT] [ 0.310781] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.319000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.319394] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 0.319562] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15) [ 0.320129] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15) [ 0.320520] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. [ 0.320960] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15) [ 0.321269] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15) [ 0.321661] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.321973] pci 0000:00:1a.0: GSI16: level-low [ 0.322028] pci 0000:00:1a.1: GSI21: level-low [ 0.322079] pci 0000:00:1a.2: GSI19: level-low [ 0.322129] pci 0000:00:1a.7: GSI18: level-low [ 0.322180] pci 0000:00:1b.0: GSI22: level-low [ 0.322231] pci 0000:00:1c.0: GSI17: level-low [ 0.322282] pci 0000:00:1d.0: GSI23: level-low [ 0.322337] pci 0000:01:00.1: GSI28: level-low [ 0.322389] pci 0000:04:00.0: GSI24: level-low [ 0.322441] pci 0000:05:00.0: GSI30: level-low [ 0.322507] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.322507] vgaarb: loaded [ 0.322507] xen_mem: Initialising balloon driver. [ 0.323044] SCSI subsystem initialized [ 0.323044] libata version 3.00 loaded. [ 0.323044] usbcore: registered new interface driver usbfs [ 0.323044] usbcore: registered new interface driver hub [ 0.323044] usbcore: registered new device driver usb [ 0.323044] Advanced Linux Sound Architecture Driver Version 1.0.23. [ 0.323044] PCI: Using ACPI for IRQ routing [ 0.323075] PCI: pci_cache_line_size set to 64 bytes [ 0.323188] reserve RAM buffer: 000000000009c000 - 000000000009ffff [ 0.323190] reserve RAM buffer: 00000000bf780000 - 00000000bfffffff [ 0.323988] cfg80211: Calling CRDA to update world regulatory domain [ 0.324163] Switching to clocksource xen [ 0.324468] Switched to NOHz mode on CPU #10 [ 0.324482] Switched to NOHz mode on CPU #2 [ 0.324484] Switched to NOHz mode on CPU #3 [ 0.324496] Switched to NOHz mode on CPU #6 [ 0.324498] Switched to NOHz mode on CPU #8 [ 0.324555] Switched to NOHz mode on CPU #7 [ 0.324558] Switched to NOHz mode on CPU #11 [ 0.324563] Switched to NOHz mode on CPU #9 [ 0.324568] Switched to NOHz mode on CPU #1 [ 0.324570] Switched to NOHz mode on CPU #4 [ 0.324691] Switched to NOHz mode on CPU #0 [ 0.324731] Switched to NOHz mode on CPU #5 [ 0.326718] pnp: PnP ACPI init [ 0.326774] ACPI: bus type pnp registered [ 0.326908] pnp 00:00: [bus 00-ff] [ 0.326910] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.326912] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.326913] pnp 00:00: [io 0x0d00-0xffff window] [ 0.326914] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.326916] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.326917] pnp 00:00: [mem 0xc0000000-0xdfffffff window] [ 0.326919] pnp 00:00: [mem 0xf0000000-0xfed8ffff window] [ 0.326970] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.326979] pnp 00:01: [mem 0xfbf00000-0xfbffffff] [ 0.326980] pnp 00:01: [mem 0xfc000000-0xfcffffff] [ 0.326981] pnp 00:01: [mem 0xfd000000-0xfdffffff] [ 0.326983] pnp 00:01: [mem 0xfe000000-0xfebfffff] [ 0.326984] pnp 00:01: [mem 0xfec8a000-0xfec8afff] [ 0.326985] pnp 00:01: [mem 0xfed10000-0xfed10fff] [ 0.327038] system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved [ 0.327097] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved [ 0.327151] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved [ 0.327205] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved [ 0.327258] system 00:01: [mem 0xfec8a000-0xfec8afff] has been reserved [ 0.327312] system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved [ 0.327367] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.327395] pnp 00:02: [dma 4] [ 0.327396] pnp 00:02: [io 0x0000-0x000f] [ 0.327397] pnp 00:02: [io 0x0081-0x0083] [ 0.327398] pnp 00:02: [io 0x0087] [ 0.327399] pnp 00:02: [io 0x0089-0x008b] [ 0.327401] pnp 00:02: [io 0x008f] [ 0.327402] pnp 00:02: [io 0x00c0-0x00df] [ 0.327443] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.327451] pnp 00:03: [io 0x0070-0x0071] [ 0.327458] pnp 00:03: [irq 8] [ 0.327495] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.327502] pnp 00:04: [io 0x0061] [ 0.327539] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.327546] pnp 00:05: [io 0x00f0-0x00ff] [ 0.327551] pnp 00:05: [irq 13] [ 0.327587] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.327654] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled] [ 0.327655] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled] [ 0.327657] pnp 00:06: [io 0x0290-0x029f] [ 0.327712] system 00:06: [io 0x0290-0x029f] has been reserved [ 0.327766] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.327917] pnp 00:07: [io 0x0010-0x001f] [ 0.327919] pnp 00:07: [io 0x0022-0x003f] [ 0.327920] pnp 00:07: [io 0x0044-0x004d] [ 0.327921] pnp 00:07: [io 0x0050-0x005f] [ 0.327922] pnp 00:07: [io 0x0062-0x0063] [ 0.327924] pnp 00:07: [io 0x0065-0x006f] [ 0.327925] pnp 00:07: [io 0x0072-0x007f] [ 0.327926] pnp 00:07: [io 0x0080] [ 0.327927] pnp 00:07: [io 0x0084-0x0086] [ 0.327928] pnp 00:07: [io 0x0088] [ 0.327930] pnp 00:07: [io 0x008c-0x008e] [ 0.327931] pnp 00:07: [io 0x0090-0x009f] [ 0.327932] pnp 00:07: [io 0x00a2-0x00bf] [ 0.327933] pnp 00:07: [io 0x00e0-0x00ef] [ 0.327935] pnp 00:07: [io 0x04d0-0x04d1] [ 0.327936] pnp 00:07: [io 0x0800-0x087f] [ 0.327937] pnp 00:07: [io 0x0400-0x03ff disabled] [ 0.327938] pnp 00:07: [io 0x0500-0x057f] [ 0.327940] pnp 00:07: [mem 0xfed1c000-0xfed1ffff] [ 0.327941] pnp 00:07: [mem 0xfed20000-0xfed3ffff] [ 0.327942] pnp 00:07: [mem 0xfed40000-0xfed8ffff] [ 0.328011] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.328068] system 00:07: [io 0x0800-0x087f] has been reserved [ 0.328121] system 00:07: [io 0x0500-0x057f] has been reserved [ 0.328174] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.328228] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.328281] system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved [ 0.328335] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.328390] pnp 00:08: [mem 0xfed00000-0xfed003ff] [ 0.328433] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.328480] pnp 00:09: [mem 0xffa00000-0xffbfffff] [ 0.328482] pnp 00:09: [mem 0xffe00000-0xffffffff] [ 0.328521] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active) [ 0.328565] pnp 00:0a: [mem 0xffc00000-0xffdfffff] [ 0.328620] system 00:0a: [mem 0xffc00000-0xffdfffff] has been reserved [ 0.328676] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.328759] pnp 00:0b: [io 0x0060] [ 0.328760] pnp 00:0b: [io 0x0064] [ 0.328762] pnp 00:0b: [mem 0xfec00000-0xfec00fff] [ 0.328763] pnp 00:0b: [mem 0xfee00000-0xfee00fff] [ 0.328819] system 00:0b: [mem 0xfec00000-0xfec00fff] has been reserved [ 0.328875] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.328929] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.328994] pnp 00:0c: [mem 0xe0000000-0xefffffff] [ 0.329051] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved [ 0.329109] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.329247] pnp 00:0d: [mem 0x00000000-0x0009ffff] [ 0.329249] pnp 00:0d: [mem 0x000c0000-0x000cffff] [ 0.329250] pnp 00:0d: [mem 0x000e0000-0x000fffff] [ 0.329252] pnp 00:0d: [mem 0x00100000-0xbfffffff] [ 0.329253] pnp 00:0d: [mem 0xfed90000-0xffffffff] [ 0.329316] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.329372] system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved [ 0.329426] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.329480] system 00:0d: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.329534] system 00:0d: [mem 0xfed90000-0xffffffff] could not be reserved [ 0.329589] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.329692] pnp: PnP ACPI: found 14 devices [ 0.329742] ACPI: ACPI bus type pnp unregistered [ 0.330048] pci 0000:00:1c.0: BAR 14: can't assign mem (size 0x400000) [ 0.330109] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.330162] pci 0000:01:00.0: PCI bridge to [bus 03-03] [ 0.330213] pci 0000:01:00.0: bridge window [io disabled] [ 0.330270] pci 0000:01:00.0: bridge window [mem disabled] [ 0.330326] pci 0000:01:00.0: bridge window [mem pref disabled] [ 0.330385] pci 0000:01:00.1: PCI bridge to [bus 02-02] [ 0.330436] pci 0000:01:00.1: bridge window [io disabled] [ 0.330493] pci 0000:01:00.1: bridge window [mem disabled] [ 0.330548] pci 0000:01:00.1: bridge window [mem 0xcff00000-0xcfffffff 64bit pref] [ 0.330625] pci 0000:00:01.0: PCI bridge to [bus 01-03] [ 0.330675] pci 0000:00:01.0: bridge window [io disabled] [ 0.330731] pci 0000:00:01.0: bridge window [mem 0xf7f00000-0xf7ffffff] [ 0.330787] pci 0000:00:01.0: bridge window [mem 0xcff00000-0xcfffffff 64bit pref] [ 0.335625] pci 0000:00:03.0: PCI bridge to [bus 04-04] [ 0.335678] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff] [ 0.335734] pci 0000:00:03.0: bridge window [mem 0xf8000000-0xfbbfffff] [ 0.335790] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.335864] pci 0000:05:00.0: PCI bridge to [bus 06-06] [ 0.335916] pci 0000:05:00.0: bridge window [io 0xd000-0xdfff] [ 0.335973] pci 0000:05:00.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.336029] pci 0000:05:00.0: bridge window [mem pref disabled] [ 0.336089] pci 0000:00:07.0: PCI bridge to [bus 05-06] [ 0.336142] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff] [ 0.336198] pci 0000:00:07.0: bridge window [mem 0xfbc00000-0xfbcfffff] [ 0.336253] pci 0000:00:07.0: bridge window [mem pref disabled] [ 0.336310] pci 0000:00:1c.0: PCI bridge to [bus 08-08] [ 0.336363] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.336419] pci 0000:00:1c.0: bridge window [mem disabled] [ 0.336473] pci 0000:00:1c.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref] [ 0.336548] pci 0000:00:1c.1: PCI bridge to [bus 07-07] [ 0.336600] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] [ 0.336656] pci 0000:00:1c.1: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.336712] pci 0000:00:1c.1: bridge window [mem 0xf6e00000-0xf6efffff 64bit pref] [ 0.336787] pci 0000:00:1e.0: PCI bridge to [bus 09-09] [ 0.336838] pci 0000:00:1e.0: bridge window [io disabled] [ 0.336893] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.336949] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.337014] pci 0000:00:01.0: setting latency timer to 64 [ 0.337023] pci 0000:01:00.0: setting latency timer to 64 [ 0.337036] pci 0000:01:00.1: PCI INT A -> GSI 28 (level, low) -> IRQ 28 [ 0.337098] pci 0000:01:00.1: setting latency timer to 64 [ 0.337106] pci 0000:00:03.0: setting latency timer to 64 [ 0.337113] pci 0000:00:07.0: setting latency timer to 64 [ 0.337122] pci 0000:05:00.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30 [ 0.337179] pci 0000:05:00.0: setting latency timer to 64 [ 0.337185] pci 0000:00:1c.0: enabling device (0106 -> 0107) [ 0.337241] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.337297] pci 0000:00:1c.0: setting latency timer to 64 [ 0.337305] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.337362] pci 0000:00:1c.1: setting latency timer to 64 [ 0.337369] pci 0000:00:1e.0: setting latency timer to 64 [ 0.337372] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.337374] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.337375] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.337376] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.337378] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff] [ 0.337379] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff] [ 0.337381] pci_bus 0000:01: resource 1 [mem 0xf7f00000-0xf7ffffff] [ 0.337382] pci_bus 0000:01: resource 2 [mem 0xcff00000-0xcfffffff 64bit pref] [ 0.337384] pci_bus 0000:02: resource 2 [mem 0xcff00000-0xcfffffff 64bit pref] [ 0.337386] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff] [ 0.337387] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xfbbfffff] [ 0.337388] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.337390] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 0.337391] pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 0.337393] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff] [ 0.337394] pci_bus 0000:06: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 0.337396] pci_bus 0000:08: resource 0 [io 0x1000-0x1fff] [ 0.337397] pci_bus 0000:08: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref] [ 0.337399] pci_bus 0000:07: resource 0 [io 0xe000-0xefff] [ 0.337400] pci_bus 0000:07: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 0.337402] pci_bus 0000:07: resource 2 [mem 0xf6e00000-0xf6efffff 64bit pref] [ 0.337403] pci_bus 0000:09: resource 1 [mem 0xfbe00000-0xfbefffff] [ 0.337405] pci_bus 0000:09: resource 4 [io 0x0000-0x0cf7] [ 0.337406] pci_bus 0000:09: resource 5 [io 0x0d00-0xffff] [ 0.337408] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff] [ 0.337409] pci_bus 0000:09: resource 7 [mem 0x000d0000-0x000dffff] [ 0.337411] pci_bus 0000:09: resource 8 [mem 0xc0000000-0xdfffffff] [ 0.337412] pci_bus 0000:09: resource 9 [mem 0xf0000000-0xfed8ffff] [ 0.337426] NET: Registered protocol family 2 [ 0.337502] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.337998] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.338561] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.338733] TCP: Hash tables configured (established 262144 bind 65536) [ 0.338787] TCP reno registered [ 0.338836] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.338923] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.339086] NET: Registered protocol family 1 [ 0.339194] RPC: Registered udp transport module. [ 0.339245] RPC: Registered tcp transport module. [ 0.339295] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.339418] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x0f30 [ 0.339419] pci 0000:00:1a.0: Performing full reset [ 0.339444] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.339445] pci 0000:00:1a.1: Performing full reset [ 0.339469] pci 0000:00:1a.2: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.339470] pci 0000:00:1a.2: Performing full reset [ 0.339567] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f30 [ 0.339569] pci 0000:00:1d.0: Performing full reset [ 0.339592] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.339594] pci 0000:00:1d.1: Performing full reset [ 0.339617] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0030 [ 0.339618] pci 0000:00:1d.2: Performing full reset [ 0.339734] pci 0000:04:00.0: Boot video device [ 0.339790] PCI: CLS 256 bytes, default 64 [ 0.339812] Trying to unpack rootfs image as initramfs... [ 0.342042] Freeing initrd memory: 4392k freed [ 0.344455] MCE: bind virq for DOM0 logging [ 0.344477] MCE_DOM0_LOG: enter dom0 mce vIRQ handler [ 0.344478] MCE_DOM0_LOG: No more urgent data [ 0.344479] MCE_DOM0_LOG: No more nonurgent data [ 60.895135] microcode: Microcode Update Driver: v2.00-xen , Peter Oruba [ 60.898615] ROMFS MTD (C) 2007 Red Hat, Inc. [ 60.898737] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled [ 60.899208] SGI XFS Quota Management subsystem [ 60.899538] Btrfs loaded [ 60.899589] msgmni has been set to 24034 [ 60.900047] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 60.900121] io scheduler noop registered [ 60.900217] io scheduler cfq registered (default) [ 60.900488] pcieport 0000:00:1c.0: setting latency timer to 64 [ 60.900549] pcieport 0000:00:1c.0: irq 68 (303) for MSI/MSI-X [ 60.900641] pcieport 0000:00:1c.1: setting latency timer to 64 [ 60.900698] pcieport 0000:00:1c.1: irq 69 (302) for MSI/MSI-X [ 60.900860] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 60.900986] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 60.901125] Non-volatile memory driver v1.3 [ 60.901458] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 60.901530] ACPI: Power Button [PWRB] [ 60.901629] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 60.901700] ACPI: Power Button [PWRF] [ 60.959334] ERST: Table is not found! [ 60.960792] brd: module loaded [ 60.961519] loop: module loaded [ 60.961734] Xen virtual console successfully installed as xvc0 [ 60.961829] Event-channel device installed. [ 60.963568] ahci 0000:00:1f.2: version 3.0 [ 60.963585] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 60.963694] ahci 0000:00:1f.2: irq 71 (301) for MSI/MSI-X [ 60.963717] ahci: SSS flag set, parallel bus scan disabled [ 60.963803] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 60.963874] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs [ 60.963949] ahci 0000:00:1f.2: setting latency timer to 64 [ 60.974812] scsi0 : ahci [ 60.974956] scsi1 : ahci [ 60.975087] scsi2 : ahci [ 60.975213] scsi3 : ahci [ 60.975340] scsi4 : ahci [ 60.975467] scsi5 : ahci [ 60.975634] ata1: SATA max UDMA/133 abar m2048@0xf7efc000 port 0xf7efc100 irq 71 [ 60.975704] ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 71 [ 60.975774] ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 71 [ 60.975845] ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 71 [ 60.975915] ata5: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 71 [ 60.975985] ata6: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 71 [ 60.976275] sata_sil24 0000:06:00.0: version 1.1 [ 60.976286] sata_sil24 0000:06:00.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30 [ 60.976424] sata_sil24 0000:06:00.0: Applying completion IRQ loss on PCI-X errata fix [ 60.977505] scsi6 : sata_sil24 [ 60.977654] scsi7 : sata_sil24 [ 60.977801] scsi8 : sata_sil24 [ 60.977948] scsi9 : sata_sil24 [ 60.978089] ata7: SATA max UDMA/100 host m128@0xfbcffc00 port 0xfbcf0000 irq 30 [ 60.978159] ata8: SATA max UDMA/100 host m128@0xfbcffc00 port 0xfbcf2000 irq 30 [ 60.978228] ata9: SATA max UDMA/100 host m128@0xfbcffc00 port 0xfbcf4000 irq 30 [ 60.978298] ata10: SATA max UDMA/100 host m128@0xfbcffc00 port 0xfbcf6000 irq 30 [ 60.978491] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 60.978555] r8169 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 60.978648] r8169 0000:07:00.0: setting latency timer to 64 [ 60.978723] r8169 0000:07:00.0: irq 72 (300) for MSI/MSI-X [ 60.978885] r8169 0000:07:00.0: eth0: RTL8168c/8111c at 0xffffc9000001e000, 00:24:8c:0a:ab:91, XID 1c4000c0 IRQ 72 [ 60.979005] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 60.979067] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 [ 60.979087] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 60.979159] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 60.979163] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 60.979217] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 60.979290] ehci_hcd 0000:00:1a.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 60.979293] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 60.979324] ehci_hcd 0000:00:1a.7: debug port 1 [ 60.979377] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 60.983262] ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported [ 60.983263] ehci_hcd 0000:00:1a.7: supports USB remote wakeup [ 60.983276] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7eff000 [ 60.983330] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 60.987224] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 60.993077] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 60.993198] usb usb1: default language 0x0409 [ 60.993204] usb usb1: udev 1, busnum 1, minor = 0 [ 60.993206] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 60.993265] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 60.993338] usb usb1: Product: EHCI Host Controller [ 60.993392] usb usb1: Manufacturer: Linux 2.6.38-xen-kali ehci_hcd [ 60.993449] usb usb1: SerialNumber: 0000:00:1a.7 [ 60.993614] usb usb1: usb_probe_device [ 60.993617] usb usb1: configuration #1 chosen from 1 choice [ 60.993624] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 60.993688] hub 1-0:1.0: usb_probe_interface [ 60.993690] hub 1-0:1.0: usb_probe_interface - got id [ 60.993692] hub 1-0:1.0: USB hub found [ 60.993749] hub 1-0:1.0: 6 ports detected [ 60.993802] hub 1-0:1.0: standalone hub [ 60.993804] hub 1-0:1.0: no power switching (usb 1.0) [ 60.993805] hub 1-0:1.0: individual port over-current protection [ 60.993807] hub 1-0:1.0: power on to power good time: 20ms [ 60.993810] hub 1-0:1.0: local power source is good [ 60.993812] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 60.993866] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 60.993993] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 60.993997] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 60.994113] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 60.994192] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 [ 60.994198] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr hw prefetch [ 60.994293] ehci_hcd 0000:00:1d.7: debug port 1 [ 60.994350] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 60.998241] ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported [ 60.998243] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 60.998259] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7efe000 [ 60.998318] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 61.002203] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 61.008126] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 61.008258] usb usb2: default language 0x0409 [ 61.008265] usb usb2: udev 1, busnum 2, minor = 128 [ 61.008268] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 61.008331] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 61.008409] usb usb2: Product: EHCI Host Controller [ 61.008468] usb usb2: Manufacturer: Linux 2.6.38-xen-kali ehci_hcd [ 61.008529] usb usb2: SerialNumber: 0000:00:1d.7 [ 61.008743] usb usb2: usb_probe_device [ 61.008748] usb usb2: configuration #1 chosen from 1 choice [ 61.008756] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 61.008845] hub 2-0:1.0: usb_probe_interface [ 61.008848] hub 2-0:1.0: usb_probe_interface - got id [ 61.008850] hub 2-0:1.0: USB hub found [ 61.008912] hub 2-0:1.0: 6 ports detected [ 61.008969] hub 2-0:1.0: standalone hub [ 61.008971] hub 2-0:1.0: no power switching (usb 1.0) [ 61.008973] hub 2-0:1.0: individual port over-current protection [ 61.008975] hub 2-0:1.0: power on to power good time: 20ms [ 61.008979] hub 2-0:1.0: local power source is good [ 61.008981] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 61.009405] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 61.012278] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 61.012342] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 61.012701] mousedev: PS/2 mouse device common for all mice [ 61.012862] rtc_cmos 00:03: RTC can wake from S4 [ 61.013014] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 61.013120] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 61.013242] i2c /dev entries driver [ 61.013406] md: raid0 personality registered for level 0 [ 61.013468] md: raid6 personality registered for level 6 [ 61.013528] md: raid5 personality registered for level 5 [ 61.013587] md: raid4 personality registered for level 4 [ 61.014470] usbcore: registered new interface driver usbhid [ 61.014532] usbhid: USB HID core driver [ 61.015208] ALSA device list: [ 61.015266] No soundcards found. [ 61.015330] IPv4 over IPv4 tunneling driver [ 61.015601] TCP cubic registered [ 61.015660] NET: Registered protocol family 17 [ 61.015731] Registering the dns_resolver key type [ 61.016694] PCI IO multiplexer device installed [ 61.017070] rtc_cmos 00:03: setting system clock to 2011-09-10 00:10:27 UTC (1315613427) [ 61.093133] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 61.093140] hub 1-0:1.0: port 1: status 0501 change 0001 [ 61.093152] ehci_hcd 0000:00:1a.7: GetStatus port:3 status 001803 0 ACK POWER sig=j CSC CONNECT [ 61.093157] hub 1-0:1.0: port 3: status 0501 change 0001 [ 61.108139] ehci_hcd 0000:00:1d.7: GetStatus port:5 status 001403 0 ACK POWER sig=k CSC CONNECT [ 61.108145] hub 2-0:1.0: port 5: status 0501 change 0001 [ 61.108155] ehci_hcd 0000:00:1d.7: GetStatus port:6 status 001403 0 ACK POWER sig=k CSC CONNECT [ 61.108159] hub 2-0:1.0: port 6: status 0501 change 0001 [ 61.193221] hub 1-0:1.0: state 7 ports 6 chg 000a evt 0000 [ 61.193238] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 61.244381] ehci_hcd 0000:00:1a.7: port 1 high speed [ 61.244388] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 61.281135] ata1: SATA link down (SStatus 0 SControl 300) [ 61.295134] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 61.346377] ehci_hcd 0000:00:1a.7: port 1 high speed [ 61.346385] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 61.410289] usb 1-1: default language 0x0409 [ 61.411270] usb 1-1: udev 2, busnum 1, minor = 1 [ 61.411273] usb 1-1: New USB device found, idVendor=058f, idProduct=6362 [ 61.411344] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 61.411413] usb 1-1: Product: Mass Storage Device [ 61.411476] usb 1-1: Manufacturer: Generic [ 61.411538] usb 1-1: SerialNumber: 058F312D81B [ 61.416615] usb 1-1: usb_probe_device [ 61.416619] usb 1-1: configuration #1 chosen from 1 choice [ 61.416793] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 61.416934] hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s [ 61.467376] ehci_hcd 0000:00:1a.7: port 3 high speed [ 61.467382] ehci_hcd 0000:00:1a.7: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 61.518094] usb 1-3: new high speed USB device using ehci_hcd and address 3 [ 61.571372] ehci_hcd 0000:00:1a.7: port 3 high speed [ 61.571379] ehci_hcd 0000:00:1a.7: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 61.645158] usb 1-3: default language 0x0409 [ 61.661285] usb 1-3: udev 3, busnum 1, minor = 2 [ 61.661289] usb 1-3: New USB device found, idVendor=148f, idProduct=3070 [ 61.661358] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 61.661426] usb 1-3: Product: 802.11 n WLAN [ 61.661489] usb 1-3: Manufacturer: Ralink [ 61.661699] usb 1-3: usb_probe_device [ 61.661703] usb 1-3: configuration #1 chosen from 1 choice [ 61.661766] usb 1-3: adding 1-3:1.0 (config #1, interface 0) [ 61.672832] hub 2-0:1.0: state 7 ports 6 chg 0060 evt 0000 [ 61.672839] hub 2-0:1.0: port 5, status 0501, change 0000, 480 Mb/s [ 61.672846] ehci_hcd 0000:00:1d.7: port 5 low speed --> companion [ 61.723098] ehci_hcd 0000:00:1d.7: GetStatus port:5 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 61.723118] hub 2-0:1.0: port 6, status 0501, change 0000, 480 Mb/s [ 61.723126] ehci_hcd 0000:00:1d.7: port 6 low speed --> companion [ 61.774095] ehci_hcd 0000:00:1d.7: GetStatus port:6 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 61.774113] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0040 [ 62.004101] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 62.005311] ata2.00: ATA-8: WDC WD5000AAKX-001CA0, 15.01H15, max UDMA/133 [ 62.005381] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 62.007634] ata2.00: configured for UDMA/133 [ 62.007796] scsi 1:0:0:0: Direct-Access ATA WDC WD5000AAKX-0 15.0 PQ: 0 ANSI: 5 [ 62.008207] sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 62.008437] sd 1:0:0:0: [sda] Write Protect is off [ 62.008511] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 62.008585] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 62.019445] sda: sda1 sda2 sda3 sda4 [ 62.020528] sd 1:0:0:0: [sda] Attached SCSI disk [ 62.731135] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 62.737446] ata3.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133 [ 62.737518] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 62.743813] ata3.00: configured for UDMA/133 [ 62.744000] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5 [ 62.744709] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 62.744924] sd 2:0:0:0: [sdb] Write Protect is off [ 62.745005] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 62.745039] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 62.758920] sdb: sdb1 [ 62.759720] sd 2:0:0:0: [sdb] Attached SCSI disk [ 63.110141] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 63.118340] ata7.00: ATA-8: OCZ-REVODRIVE, 1.23, max UDMA/133 [ 63.118410] ata7.00: 78161328 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 63.128303] ata7.00: configured for UDMA/100 [ 63.467136] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 63.473457] ata4.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133 [ 63.473529] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 63.479944] ata4.00: configured for UDMA/133 [ 63.480117] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5 [ 63.480912] sd 3:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 63.481150] sd 3:0:0:0: [sdc] Write Protect is off [ 63.481229] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 63.481264] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 63.487218] sdc: unknown partition table [ 63.487932] sd 3:0:0:0: [sdc] Attached SCSI disk [ 64.204134] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 64.210452] ata5.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133 [ 64.210523] ata5.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 64.216851] ata5.00: configured for UDMA/133 [ 64.217016] scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5 [ 64.217674] sd 4:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 64.217904] sd 4:0:0:0: [sdd] Write Protect is off [ 64.217983] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 64.218022] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 64.233356] sdd: unknown partition table [ 64.233934] sd 4:0:0:0: [sdd] Attached SCSI disk [ 64.940136] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 64.942826] ata6.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL00, max UDMA/100 [ 64.946491] ata6.00: configured for UDMA/100 [ 65.057829] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS10 EL00 PQ: 0 ANSI: 5 [ 65.166773] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 65.166860] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 65.167235] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 65.167631] scsi 6:0:0:0: Direct-Access ATA OCZ-REVODRIVE 1.23 PQ: 0 ANSI: 5 [ 65.168002] sd 6:0:0:0: [sde] 78161328 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 65.168225] sd 6:0:0:0: [sde] Write Protect is off [ 65.168293] sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 65.168318] sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 65.168835] sde: sde1 [ 65.169514] sd 6:0:0:0: [sde] Attached SCSI disk [ 67.300137] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 67.302854] ata8.00: ATA-8: OCZ-REVODRIVE, 1.23, max UDMA/133 [ 67.302925] ata8.00: 78161328 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 67.312828] ata8.00: configured for UDMA/100 [ 67.313041] scsi 7:0:0:0: Direct-Access ATA OCZ-REVODRIVE 1.23 PQ: 0 ANSI: 5 [ 67.313780] sd 7:0:0:0: [sdf] 78161328 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 67.314018] sd 7:0:0:0: [sdf] Write Protect is off [ 67.314130] sd 7:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 67.314230] sd 7:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 67.314857] sdf: sdf1 [ 67.315794] sd 7:0:0:0: [sdf] Attached SCSI disk [ 69.345154] ata9: SATA link down (SStatus 0 SControl 0) [ 71.387137] ata10: SATA link down (SStatus 0 SControl 0) [ 71.387843] Freeing unused kernel memory: 376k freed [ 71.517626] md: md0 stopped. [ 71.518798] md: bind [ 71.518981] md: bind [ 71.519294] bio: create slab at 1 [ 71.519364] md/raid0:md0: looking at sde1 [ 71.519427] md/raid0:md0: comparing sde1(78155776) with sde1(78155776) [ 71.519534] md/raid0:md0: END [ 71.519594] md/raid0:md0: ==> UNIQUE [ 71.519655] md/raid0:md0: 1 zones [ 71.519716] md/raid0:md0: looking at sdf1 [ 71.519778] md/raid0:md0: comparing sdf1(78155776) with sde1(78155776) [ 71.519885] md/raid0:md0: EQUAL [ 71.519945] md/raid0:md0: FINAL 1 zones [ 71.520008] md/raid0:md0: done. [ 71.520079] md/raid0:md0: md_size is 156311552 sectors. [ 71.520144] ******* md0 configuration ********* [ 71.520206] zone0=[sde1/sdf1/] [ 71.520384] zone offset=0kb device offset=0kb size=78155776kb [ 71.520450] ********************************** [ 71.520451] [ 71.520576] md0: detected capacity change from 0 to 80031514624 [ 71.521295] md0: unknown partition table [ 71.768281] UDF-fs: No partition found (1) [ 71.792552] device label system devid 1 transid 228397 /dev/md0 [ 72.396385] udev[1197]: starting version 164 [ 72.477654] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 72.477660] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x400-0x40f] [ 72.477663] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 72.477881] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 72.481704] uhci_hcd: USB Universal Host Controller Interface driver [ 72.481815] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 72.481828] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 72.481832] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 72.481840] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 72.481850] uhci_hcd 0000:00:1a.0: detected 2 ports [ 72.481857] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 72.481859] uhci_hcd 0000:00:1a.0: Performing full reset [ 72.481878] uhci_hcd 0000:00:1a.0: supports USB remote wakeup [ 72.481907] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800 [ 72.481978] usb usb3: default language 0x0409 [ 72.481984] usb usb3: udev 1, busnum 3, minor = 256 [ 72.481985] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 72.481987] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 72.481989] usb usb3: Product: UHCI Host Controller [ 72.481992] usb usb3: Manufacturer: Linux 2.6.38-xen-kali uhci_hcd [ 72.481993] usb usb3: SerialNumber: 0000:00:1a.0 [ 72.482105] usb usb3: usb_probe_device [ 72.482109] usb usb3: configuration #1 chosen from 1 choice [ 72.482118] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 72.482141] hub 3-0:1.0: usb_probe_interface [ 72.482143] hub 3-0:1.0: usb_probe_interface - got id [ 72.482145] hub 3-0:1.0: USB hub found [ 72.482150] hub 3-0:1.0: 2 ports detected [ 72.482152] hub 3-0:1.0: standalone hub [ 72.482153] hub 3-0:1.0: no power switching (usb 1.0) [ 72.482154] hub 3-0:1.0: individual port over-current protection [ 72.482157] hub 3-0:1.0: power on to power good time: 2ms [ 72.482160] hub 3-0:1.0: local power source is good [ 72.482163] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 72.482232] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 72.482241] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 72.482244] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 72.482250] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 72.482259] uhci_hcd 0000:00:1a.1: detected 2 ports [ 72.482264] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 72.482266] uhci_hcd 0000:00:1a.1: Performing full reset [ 72.482284] uhci_hcd 0000:00:1a.1: supports USB remote wakeup [ 72.482301] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880 [ 72.482361] usb usb4: default language 0x0409 [ 72.482368] usb usb4: udev 1, busnum 4, minor = 384 [ 72.482370] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 72.482371] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 72.482373] usb usb4: Product: UHCI Host Controller [ 72.482375] usb usb4: Manufacturer: Linux 2.6.38-xen-kali uhci_hcd [ 72.482377] usb usb4: SerialNumber: 0000:00:1a.1 [ 72.482444] usb usb4: usb_probe_device [ 72.482446] usb usb4: configuration #1 chosen from 1 choice [ 72.482452] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 72.482476] hub 4-0:1.0: usb_probe_interface [ 72.482478] hub 4-0:1.0: usb_probe_interface - got id [ 72.482480] hub 4-0:1.0: USB hub found [ 72.482484] hub 4-0:1.0: 2 ports detected [ 72.482485] hub 4-0:1.0: standalone hub [ 72.482486] hub 4-0:1.0: no power switching (usb 1.0) [ 72.482488] hub 4-0:1.0: individual port over-current protection [ 72.482489] hub 4-0:1.0: power on to power good time: 2ms [ 72.482492] hub 4-0:1.0: local power source is good [ 72.482494] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 72.482550] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 72.482559] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 72.482563] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 72.482571] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 72.482579] uhci_hcd 0000:00:1a.2: detected 2 ports [ 72.482586] uhci_hcd 0000:00:1a.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 72.482588] uhci_hcd 0000:00:1a.2: Performing full reset [ 72.482606] uhci_hcd 0000:00:1a.2: supports USB remote wakeup [ 72.482625] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000bc00 [ 72.482684] usb usb5: default language 0x0409 [ 72.482690] usb usb5: udev 1, busnum 5, minor = 512 [ 72.482692] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 72.482694] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 72.482697] usb usb5: Product: UHCI Host Controller [ 72.482698] usb usb5: Manufacturer: Linux 2.6.38-xen-kali uhci_hcd [ 72.482700] usb usb5: SerialNumber: 0000:00:1a.2 [ 72.482775] usb usb5: usb_probe_device [ 72.482777] usb usb5: configuration #1 chosen from 1 choice [ 72.482784] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 72.482807] hub 5-0:1.0: usb_probe_interface [ 72.482809] hub 5-0:1.0: usb_probe_interface - got id [ 72.482811] hub 5-0:1.0: USB hub found [ 72.482815] hub 5-0:1.0: 2 ports detected [ 72.482816] hub 5-0:1.0: standalone hub [ 72.482817] hub 5-0:1.0: no power switching (usb 1.0) [ 72.482818] hub 5-0:1.0: individual port over-current protection [ 72.482820] hub 5-0:1.0: power on to power good time: 2ms [ 72.482823] hub 5-0:1.0: local power source is good [ 72.482824] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 72.482888] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 72.482901] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 72.482905] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 72.482912] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 72.482922] uhci_hcd 0000:00:1d.0: detected 2 ports [ 72.482927] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 72.482928] uhci_hcd 0000:00:1d.0: Performing full reset [ 72.482947] uhci_hcd 0000:00:1d.0: supports USB remote wakeup [ 72.482957] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080 [ 72.483016] usb usb6: default language 0x0409 [ 72.483023] usb usb6: udev 1, busnum 6, minor = 640 [ 72.483025] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 72.483027] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 72.483030] usb usb6: Product: UHCI Host Controller [ 72.483031] usb usb6: Manufacturer: Linux 2.6.38-xen-kali uhci_hcd [ 72.483033] usb usb6: SerialNumber: 0000:00:1d.0 [ 72.483128] usb usb6: usb_probe_device [ 72.483130] usb usb6: configuration #1 chosen from 1 choice [ 72.483139] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 72.483163] hub 6-0:1.0: usb_probe_interface [ 72.483164] hub 6-0:1.0: usb_probe_interface - got id [ 72.483166] hub 6-0:1.0: USB hub found [ 72.483171] hub 6-0:1.0: 2 ports detected [ 72.483172] hub 6-0:1.0: standalone hub [ 72.483173] hub 6-0:1.0: no power switching (usb 1.0) [ 72.483174] hub 6-0:1.0: individual port over-current protection [ 72.483176] hub 6-0:1.0: power on to power good time: 2ms [ 72.483182] hub 6-0:1.0: local power source is good [ 72.483183] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 72.483248] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 72.483256] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 72.483259] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 72.483264] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 72.483272] uhci_hcd 0000:00:1d.1: detected 2 ports [ 72.483277] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 72.483279] uhci_hcd 0000:00:1d.1: Performing full reset [ 72.483297] uhci_hcd 0000:00:1d.1: supports USB remote wakeup [ 72.483304] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400 [ 72.483363] usb usb7: default language 0x0409 [ 72.483368] usb usb7: udev 1, busnum 7, minor = 768 [ 72.483370] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 72.483372] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 72.483373] usb usb7: Product: UHCI Host Controller [ 72.483375] usb usb7: Manufacturer: Linux 2.6.38-xen-kali uhci_hcd [ 72.483376] usb usb7: SerialNumber: 0000:00:1d.1 [ 72.483467] usb usb7: usb_probe_device [ 72.483469] usb usb7: configuration #1 chosen from 1 choice [ 72.483477] usb usb7: adding 7-0:1.0 (config #1, interface 0) [ 72.483504] hub 7-0:1.0: usb_probe_interface [ 72.483505] hub 7-0:1.0: usb_probe_interface - got id [ 72.483509] hub 7-0:1.0: USB hub found [ 72.483513] hub 7-0:1.0: 2 ports detected [ 72.483515] hub 7-0:1.0: standalone hub [ 72.483516] hub 7-0:1.0: no power switching (usb 1.0) [ 72.483517] hub 7-0:1.0: individual port over-current protection [ 72.483519] hub 7-0:1.0: power on to power good time: 2ms [ 72.483521] hub 7-0:1.0: local power source is good [ 72.483523] hub 7-0:1.0: trying to enable port power on non-switchable hub [ 72.483582] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 72.483590] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 72.483594] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 72.483599] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 72.483608] uhci_hcd 0000:00:1d.2: detected 2 ports [ 72.483613] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 72.483614] uhci_hcd 0000:00:1d.2: Performing full reset [ 72.483632] uhci_hcd 0000:00:1d.2: supports USB remote wakeup [ 72.483640] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480 [ 72.483690] nvidia: module license 'NVIDIA' taints kernel. [ 72.483693] Disabling lock debugging due to kernel taint [ 72.483695] usb usb8: default language 0x0409 [ 72.483700] usb usb8: udev 1, busnum 8, minor = 896 [ 72.483701] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 72.483703] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 72.483705] usb usb8: Product: UHCI Host Controller [ 72.483707] usb usb8: Manufacturer: Linux 2.6.38-xen-kali uhci_hcd [ 72.483709] usb usb8: SerialNumber: 0000:00:1d.2 [ 72.483783] usb usb8: usb_probe_device [ 72.483786] usb usb8: configuration #1 chosen from 1 choice [ 72.483793] usb usb8: adding 8-0:1.0 (config #1, interface 0) [ 72.483817] hub 8-0:1.0: usb_probe_interface [ 72.483819] hub 8-0:1.0: usb_probe_interface - got id [ 72.483822] hub 8-0:1.0: USB hub found [ 72.483825] hub 8-0:1.0: 2 ports detected [ 72.483827] hub 8-0:1.0: standalone hub [ 72.483829] hub 8-0:1.0: no power switching (usb 1.0) [ 72.483831] hub 8-0:1.0: individual port over-current protection [ 72.483832] hub 8-0:1.0: power on to power good time: 2ms [ 72.483838] hub 8-0:1.0: local power source is good [ 72.483840] hub 8-0:1.0: trying to enable port power on non-switchable hub [ 72.489025] firewire_ohci 0000:09:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 72.499351] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 72.499373] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 72.499393] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 72.499415] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 72.499436] sr 5:0:0:0: Attached scsi generic sg4 type 5 [ 72.499462] sd 6:0:0:0: Attached scsi generic sg5 type 0 [ 72.499483] sd 7:0:0:0: Attached scsi generic sg6 type 0 [ 72.506699] Initializing USB Mass Storage driver... [ 72.506715] usb-storage 1-1:1.0: usb_probe_interface [ 72.506719] usb-storage 1-1:1.0: usb_probe_interface - got id [ 72.506780] scsi10 : usb-storage 1-1:1.0 [ 72.506849] usbcore: registered new interface driver usb-storage [ 72.506850] USB Mass Storage support registered. [ 72.510399] rt2800usb 1-3:1.0: usb_probe_interface [ 72.510403] rt2800usb 1-3:1.0: usb_probe_interface - got id [ 72.515487] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 72.515579] HDA Intel 0000:00:1b.0: irq 73 (299) for MSI/MSI-X [ 72.515616] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 72.533500] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 72.533639] Registered led device: rt2800usb-phy0::radio [ 72.533653] Registered led device: rt2800usb-phy0::assoc [ 72.533667] Registered led device: rt2800usb-phy0::quality [ 72.533910] usbcore: registered new interface driver rt2800usb [ 72.540181] firewire_ohci: Added fw-ohci device 0000:09:04.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0 [ 72.583148] uhci_hcd 0000:00:1a.0: port 1 portsc 0082,00 [ 72.583166] uhci_hcd 0000:00:1a.1: port 1 portsc 0082,00 [ 72.583197] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 72.583201] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 72.583214] uhci_hcd 0000:00:1d.2: port 1 portsc 01ab,00 [ 72.583216] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 72.583219] hub 8-0:1.0: port 1: status 0301 change 0003 [ 72.583231] uhci_hcd 0000:00:1d.2: port 2 portsc 01ab,00 [ 72.583233] hub 8-0:1.0: port 2: status 0301 change 0003 [ 72.684174] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 72.684177] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 72.684179] hub 8-0:1.0: state 7 ports 2 chg 0006 evt 0000 [ 72.684189] hub 8-0:1.0: port 1, status 0301, change 0000, 1.5 Mb/s [ 72.787061] usb 8-1: new low speed USB device using uhci_hcd and address 2 [ 72.929692] usb 8-1: skipped 1 descriptor after interface [ 72.934689] usb 8-1: default language 0x0409 [ 72.940283] nvidia 0000:04:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 [ 72.940291] nvidia 0000:04:00.0: setting latency timer to 64 [ 72.940295] vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 72.940574] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 275.09.07 Wed Jun 8 14:16:46 PDT 2011 [ 72.946208] udev[1211]: renamed network interface wlan0 to wlan3 [ 72.951700] usb 8-1: udev 2, busnum 8, minor = 897 [ 72.951703] usb 8-1: New USB device found, idVendor=046d, idProduct=c00e [ 72.951705] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 72.951707] usb 8-1: Product: USB-PS/2 Optical Mouse [ 72.951708] usb 8-1: Manufacturer: Logitech [ 72.951774] usb 8-1: usb_probe_device [ 72.951777] usb 8-1: configuration #1 chosen from 1 choice [ 72.954692] usb 8-1: adding 8-1:1.0 (config #1, interface 0) [ 72.954712] usbhid 8-1:1.0: usb_probe_interface [ 72.954714] usbhid 8-1:1.0: usb_probe_interface - got id [ 72.967841] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input3 [ 72.967869] generic-usb 0003:046D:C00E.0001: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.2-1/input0 [ 72.967898] hub 8-0:1.0: port 2, status 0301, change 0000, 1.5 Mb/s [ 72.990466] md: bind [ 72.996780] md: bind [ 73.003277] md: bind [ 73.006539] md/raid:md1: device sdc operational as raid disk 0 [ 73.006545] md/raid:md1: device sdb operational as raid disk 2 [ 73.006549] md/raid:md1: device sdd operational as raid disk 1 [ 73.006973] md/raid:md1: allocated 3230kB [ 73.007040] md/raid:md1: raid level 5 active with 3 out of 3 devices, algorithm 2 [ 73.007043] RAID conf printout: [ 73.007046] --- level:5 rd:3 wd:3 [ 73.007049] disk 0, o:1, dev:sdc [ 73.007065] disk 1, o:1, dev:sdd [ 73.007067] disk 2, o:1, dev:sdb [ 73.007111] md1: detected capacity change from 0 to 4000794542080 [ 73.031303] md1: unknown partition table [ 73.041199] firewire_core: created device fw0: GUID 001e8c0001b90592, S400 [ 73.070094] usb 8-2: new low speed USB device using uhci_hcd and address 3 [ 73.273742] usb 8-2: skipped 1 descriptor after interface [ 73.273747] usb 8-2: skipped 1 descriptor after interface [ 73.282736] usb 8-2: default language 0x0409 [ 73.340741] usb 8-2: udev 3, busnum 8, minor = 898 [ 73.340745] usb 8-2: New USB device found, idVendor=06a3, idProduct=8021 [ 73.340749] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 73.340752] usb 8-2: Product: Saitek Eclipse II Keyboard [ 73.340755] usb 8-2: Manufacturer: Chicony [ 73.340838] usb 8-2: usb_probe_device [ 73.340843] usb 8-2: configuration #1 chosen from 1 choice [ 73.344740] usb 8-2: adding 8-2:1.0 (config #1, interface 0) [ 73.344778] usbhid 8-2:1.0: usb_probe_interface [ 73.344781] usbhid 8-2:1.0: usb_probe_interface - got id [ 73.393944] input: Chicony Saitek Eclipse II Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input4 [ 73.393956] uhci_hcd 0000:00:1d.2: reserve dev 3 ep81-INT, period 8, phase 4, 118 us [ 73.393963] generic-usb 0003:06A3:8021.0002: input: USB HID v1.11 Keyboard [Chicony Saitek Eclipse II Keyboard] on usb-0000:00:1d.2-2/input0 [ 73.393983] usb 8-2: adding 8-2:1.1 (config #1, interface 1) [ 73.394016] usbhid 8-2:1.1: usb_probe_interface [ 73.394019] usbhid 8-2:1.1: usb_probe_interface - got id [ 73.508213] scsi 10:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 73.508831] scsi 10:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 73.509437] scsi 10:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 73.510069] scsi 10:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 73.510943] sd 10:0:0:0: Attached scsi generic sg7 type 0 [ 73.511228] sd 10:0:0:1: Attached scsi generic sg8 type 0 [ 73.511390] sd 10:0:0:2: Attached scsi generic sg9 type 0 [ 73.512464] sd 10:0:0:3: Attached scsi generic sg10 type 0 [ 73.547779] input: Chicony Saitek Eclipse II Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/input/input5 [ 73.547790] uhci_hcd 0000:00:1d.2: reserve dev 3 ep82-INT, period 8, phase 4, 93 us [ 73.547805] usbhid 8-2:1.1: looking for a minor, starting at 96 [ 73.547865] generic-usb 0003:06A3:8021.0003: input,hiddev0: USB HID v1.11 Device [Chicony Saitek Eclipse II Keyboard] on usb-0000:00:1d.2-2/input1 [ 73.658372] sd 10:0:0:2: [sdi] 16000 512-byte logical blocks: (8.19 MB/7.81 MiB) [ 73.660167] sd 10:0:0:3: [sdj] Attached SCSI removable disk [ 73.660918] sd 10:0:0:2: [sdi] Write Protect is off [ 73.660924] sd 10:0:0:2: [sdi] Mode Sense: 03 00 00 00 [ 73.662169] sd 10:0:0:1: [sdh] Attached SCSI removable disk [ 73.663195] sd 10:0:0:0: [sdg] Attached SCSI removable disk [ 73.663533] sd 10:0:0:2: [sdi] No Caching mode page present [ 73.663537] sd 10:0:0:2: [sdi] Assuming drive cache: write through [ 73.668466] sd 10:0:0:2: [sdi] No Caching mode page present [ 73.668471] sd 10:0:0:2: [sdi] Assuming drive cache: write through [ 73.703109] usb usb5: suspend_rh (auto-stop) [ 73.703143] usb usb6: suspend_rh (auto-stop) [ 73.703175] usb usb7: suspend_rh (auto-stop) [ 73.703206] usb usb3: suspend_rh (auto-stop) [ 73.703238] usb usb4: suspend_rh (auto-stop) [ 73.761728] sdi: sdi1 [ 73.766819] sd 10:0:0:2: [sdi] No Caching mode page present [ 73.766824] sd 10:0:0:2: [sdi] Assuming drive cache: write through [ 73.766827] sd 10:0:0:2: [sdi] Attached SCSI removable disk [ 74.156537] coretemp coretemp.0: TjMax is 101 C. [ 74.156957] coretemp coretemp.2: TjMax is 101 C. [ 74.157550] coretemp coretemp.4: TjMax is 101 C. [ 74.158560] coretemp coretemp.6: TjMax is 101 C. [ 74.158970] coretemp coretemp.8: TjMax is 101 C. [ 74.159439] coretemp coretemp.10: TjMax is 101 C. [ 74.314543] NET: Registered protocol family 10 [ 74.642572] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@xxxxxxxxxx [ 76.778633] btrfs: use ssd allocation scheme [ 76.958370] XFS mounting filesystem dm-0 [ 77.303947] Ending clean XFS mount for filesystem: dm-0 [ 78.753020] ADDRCONF(NETDEV_UP): wlan3: link is not ready [ 78.978781] r8169 0000:07:00.0: eth0: link down [ 78.982546] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 80.114266] wlan3: authenticate with d8:5d:4c:ba:d4:7a (try 1) [ 80.115763] wlan3: authenticated [ 81.220156] wlan3: associate with d8:5d:4c:ba:d4:7a (try 1) [ 81.222163] wlan3: RX AssocResp from d8:5d:4c:ba:d4:7a (capab=0x431 status=0 aid=1) [ 81.222167] wlan3: associated [ 81.234021] ADDRCONF(NETDEV_CHANGE): wlan3: link becomes ready [ 81.329524] ------------[ cut here ]------------ [ 81.329534] WARNING: at kernel/printk.c:288 do_syslog+0x85/0x448() [ 81.329537] Hardware name: System Product Name [ 81.329539] Attempt to access syslog with CAP_SYS_ADMIN but no CAP_SYSLOG (deprecated). [ 81.329542] Modules linked in: dm_crypt dm_mod ipv6 nls_cp850 nls_cp437 coretemp xts gf128mul nvidia(P) snd_hda_intel rt2800usb usb_storage rt2800lib sg snd_hda_codec rt2x00usb rt2x00lib firewire_ohci firewire_core uhci_hcd i2c_i801 pcspkr asus_atk0110 [ 81.329562] Pid: 2290, comm: syslog-ng Tainted: P 2.6.38-xen-kali #3 [ 81.329565] Call Trace: [ 81.329570] [] ? warn_slowpath_common+0x78/0x8c [ 81.329576] [] ? kmsg_release+0x0/0x1b [ 81.329580] [] ? warn_slowpath_fmt+0x45/0x4a [ 81.329586] [] ? proc_lookup_de+0xa3/0xbb [ 81.329590] [] ? do_syslog+0x85/0x448 [ 81.329595] [] ? need_resched+0x1a/0x23 [ 81.329599] [] ? should_resched+0x5/0x24 [ 81.329605] [] ? _cond_resched+0x9/0x20 [ 81.329610] [] ? slab_pre_alloc_hook.clone.45+0x15/0x1c [ 81.329614] [] ? kmsg_release+0x0/0x1b [ 81.329618] [] ? proc_reg_open+0x9f/0x13f [ 81.329621] [] ? kmsg_open+0x0/0x1b [ 81.329625] [] ? proc_reg_open+0x0/0x13f [ 81.329630] [] ? __dentry_open.clone.14+0x110/0x21a [ 81.329634] [] ? finish_open+0x97/0x159 [ 81.329638] [] ? do_path_lookup+0x7d/0xe1 [ 81.329642] [] ? do_filp_open+0x15e/0x5cf [ 81.329648] [] ? fsnotify_clear_marks_by_inode+0x84/0xc3 [ 81.329652] [] ? need_resched+0x1a/0x23 [ 81.329656] [] ? should_resched+0x5/0x24 [ 81.329660] [] ? _cond_resched+0x9/0x20 [ 81.329664] [] ? need_resched+0x1a/0x23 [ 81.329668] [] ? should_resched+0x5/0x24 [ 81.329672] [] ? need_resched+0x1a/0x23 [ 81.329676] [] ? should_resched+0x5/0x24 [ 81.329680] [] ? alloc_fd+0x103/0x115 [ 81.329684] [] ? do_sys_open+0x56/0xe4 [ 81.329689] [] ? system_call_fastpath+0x16/0x1b [ 81.329693] [] ? system_call+0x0/0x52 [ 81.329695] ---[ end trace f5e9ca4210e44b47 ]--- [ 83.478110] uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 8, phase 4, 93 us [ 83.487710] uhci_hcd 0000:00:1d.2: release dev 2 ep81-INT, period 8, phase 4, 93 us [ 83.502072] uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 8, phase 4, 93 us [ 83.511709] uhci_hcd 0000:00:1d.2: release dev 2 ep81-INT, period 8, phase 4, 93 us [ 83.526072] uhci_hcd 0000:00:1d.2: reserve dev 2 ep81-INT, period 8, phase 4, 93 us [ 91.673068] wlan3: no IPv6 routers present [ 93.522509] ata2.00: configured for UDMA/133 [ 93.522513] ata2: EH complete [ 94.365986] ata3.00: configured for UDMA/133 [ 94.365989] ata3: EH complete [ 94.454397] ata4.00: configured for UDMA/133 [ 94.454400] ata4: EH complete [ 94.615036] ata5.00: configured for UDMA/133 [ 94.615040] ata5: EH complete [ 94.638617] ata7.00: configured for UDMA/100 [ 94.638622] ata7: EH complete [ 94.663118] ata8.00: configured for UDMA/100 [ 94.663123] ata8: EH complete [ 99.881918] Adding 524284k swap on /warehouse/swapfile.0. Priority:-1 extents:1 across:524284k [ 196.896292] chrome_sandbox (3307): /proc/3305/oom_adj is deprecated, please use /proc/3305/oom_score_adj instead.